drm/i915: Add Display Port support

Signed-off-by: NKeith Packard <keithp@keithp.com>

drivers/gpu/drm/i915/Makefile

@@ -13,6 +13,8 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
 	  intel_crt.o \
 	  intel_lvds.o \
 	  intel_bios.o \
+	  intel_dp.o \
+	  intel_dp_i2c.o \
 	  intel_hdmi.o \
 	  intel_sdvo.o \
 	  intel_modes.o \

drivers/gpu/drm/i915/i915_drv.h

@@ -306,6 +306,17 @@ typedef struct drm_i915_private {
 	u32 saveCURBPOS;
 	u32 saveCURBBASE;
 	u32 saveCURSIZE;
+	u32 saveDP_B;
+	u32 saveDP_C;
+	u32 saveDP_D;
+	u32 savePIPEA_GMCH_DATA_M;
+	u32 savePIPEB_GMCH_DATA_M;
+	u32 savePIPEA_GMCH_DATA_N;
+	u32 savePIPEB_GMCH_DATA_N;
+	u32 savePIPEA_DP_LINK_M;
+	u32 savePIPEB_DP_LINK_M;
+	u32 savePIPEA_DP_LINK_N;
+	u32 savePIPEB_DP_LINK_N;
 
 	struct {
 		struct drm_mm gtt_space;
@@ -857,6 +868,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define HAS_128_BYTE_Y_TILING(dev) (IS_I9XX(dev) && !(IS_I915G(dev) || \
 						      IS_I915GM(dev)))
 #define SUPPORTS_INTEGRATED_HDMI(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
+#define SUPPORTS_INTEGRATED_DP(dev)	(IS_G4X(dev) || IS_IGDNG(dev))
 #define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)

drivers/gpu/drm/i915/i915_suspend.c

@@ -322,6 +322,20 @@ int i915_save_state(struct drm_device *dev)
 	dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
 	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		dev_priv->saveDP_B = I915_READ(DP_B);
+		dev_priv->saveDP_C = I915_READ(DP_C);
+		dev_priv->saveDP_D = I915_READ(DP_D);
+		dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(PIPEA_GMCH_DATA_M);
+		dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(PIPEB_GMCH_DATA_M);
+		dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(PIPEA_GMCH_DATA_N);
+		dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(PIPEB_GMCH_DATA_N);
+		dev_priv->savePIPEA_DP_LINK_M = I915_READ(PIPEA_DP_LINK_M);
+		dev_priv->savePIPEB_DP_LINK_M = I915_READ(PIPEB_DP_LINK_M);
+		dev_priv->savePIPEA_DP_LINK_N = I915_READ(PIPEA_DP_LINK_N);
+		dev_priv->savePIPEB_DP_LINK_N = I915_READ(PIPEB_DP_LINK_N);
+	}
 	/* FIXME: save TV & SDVO state */
 
 	/* FBC state */
@@ -404,7 +418,19 @@ int i915_restore_state(struct drm_device *dev)
 			for (i = 0; i < 8; i++)
 				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
 	}
-
+	
+	/* Display port ratios (must be done before clock is set) */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+		I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+		I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+		I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+		I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+		I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+		I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+		I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+	}
+	
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -518,6 +544,12 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
 	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
 
+	/* Display Port state */
+	if (SUPPORTS_INTEGRATED_DP(dev)) {
+		I915_WRITE(DP_B, dev_priv->saveDP_B);
+		I915_WRITE(DP_C, dev_priv->saveDP_C);
+		I915_WRITE(DP_D, dev_priv->saveDP_D);
+	}
 	/* FIXME: restore TV & SDVO state */
 
 	/* FBC info */

drivers/gpu/drm/i915/intel_display.c

@@ -29,6 +29,7 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "intel_dp.h"
 
 #include "drm_crtc_helper.h"
 
@@ -135,10 +136,11 @@ struct intel_limit {
 #define INTEL_LIMIT_G4X_HDMI_DAC   5
 #define INTEL_LIMIT_G4X_SINGLE_CHANNEL_LVDS   6
 #define INTEL_LIMIT_G4X_DUAL_CHANNEL_LVDS   7
-#define INTEL_LIMIT_IGD_SDVO_DAC    8
-#define INTEL_LIMIT_IGD_LVDS	    9
-#define INTEL_LIMIT_IGDNG_SDVO_DAC  10
-#define INTEL_LIMIT_IGDNG_LVDS	    11
+#define INTEL_LIMIT_G4X_DISPLAY_PORT	8
+#define INTEL_LIMIT_IGD_SDVO_DAC    9
+#define INTEL_LIMIT_IGD_LVDS	    10
+#define INTEL_LIMIT_IGDNG_SDVO_DAC  11
+#define INTEL_LIMIT_IGDNG_LVDS	    12
 
 /*The parameter is for SDVO on G4x platform*/
 #define G4X_DOT_SDVO_MIN           25000
@@ -218,6 +220,25 @@ struct intel_limit {
 #define G4X_P2_DUAL_CHANNEL_LVDS_FAST           7
 #define G4X_P2_DUAL_CHANNEL_LVDS_LIMIT          0
 
+/*The parameter is for DISPLAY PORT on G4x platform*/
+#define G4X_DOT_DISPLAY_PORT_MIN           161670
+#define G4X_DOT_DISPLAY_PORT_MAX           227000
+#define G4X_N_DISPLAY_PORT_MIN             1
+#define G4X_N_DISPLAY_PORT_MAX             2
+#define G4X_M_DISPLAY_PORT_MIN             97
+#define G4X_M_DISPLAY_PORT_MAX             108
+#define G4X_M1_DISPLAY_PORT_MIN            0x10
+#define G4X_M1_DISPLAY_PORT_MAX            0x12
+#define G4X_M2_DISPLAY_PORT_MIN            0x05
+#define G4X_M2_DISPLAY_PORT_MAX            0x06
+#define G4X_P_DISPLAY_PORT_MIN             10
+#define G4X_P_DISPLAY_PORT_MAX             20
+#define G4X_P1_DISPLAY_PORT_MIN            1
+#define G4X_P1_DISPLAY_PORT_MAX            2
+#define G4X_P2_DISPLAY_PORT_SLOW           10
+#define G4X_P2_DISPLAY_PORT_FAST           10
+#define G4X_P2_DISPLAY_PORT_LIMIT          0
+
 /* IGDNG */
 /* as we calculate clock using (register_value + 2) for
    N/M1/M2, so here the range value for them is (actual_value-2).
@@ -256,6 +277,10 @@ static bool
 intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 			int target, int refclk, intel_clock_t *best_clock);
 
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock);
+
 static const intel_limit_t intel_limits[] = {
     { /* INTEL_LIMIT_I8XX_DVO_DAC */
         .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
@@ -389,6 +414,28 @@ static const intel_limit_t intel_limits[] = {
 	},
 	.find_pll = intel_g4x_find_best_PLL,
     },
+    {   /* INTEL_LIMIT_G4X_DISPLAY_PORT */
+        .dot = { .min = G4X_DOT_DISPLAY_PORT_MIN,
+                 .max = G4X_DOT_DISPLAY_PORT_MAX },
+        .vco = { .min = G4X_VCO_MIN,
+                 .max = G4X_VCO_MAX},
+        .n   = { .min = G4X_N_DISPLAY_PORT_MIN,
+                 .max = G4X_N_DISPLAY_PORT_MAX },
+        .m   = { .min = G4X_M_DISPLAY_PORT_MIN,
+                 .max = G4X_M_DISPLAY_PORT_MAX },
+        .m1  = { .min = G4X_M1_DISPLAY_PORT_MIN,
+                 .max = G4X_M1_DISPLAY_PORT_MAX },
+        .m2  = { .min = G4X_M2_DISPLAY_PORT_MIN,
+                 .max = G4X_M2_DISPLAY_PORT_MAX },
+        .p   = { .min = G4X_P_DISPLAY_PORT_MIN,
+                 .max = G4X_P_DISPLAY_PORT_MAX },
+        .p1  = { .min = G4X_P1_DISPLAY_PORT_MIN,
+                 .max = G4X_P1_DISPLAY_PORT_MAX},
+        .p2  = { .dot_limit = G4X_P2_DISPLAY_PORT_LIMIT,
+                 .p2_slow = G4X_P2_DISPLAY_PORT_SLOW,
+                 .p2_fast = G4X_P2_DISPLAY_PORT_FAST },
+        .find_pll = intel_find_pll_g4x_dp,
+    },
     { /* INTEL_LIMIT_IGD_SDVO */
         .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX},
         .vco = { .min = IGD_VCO_MIN,		.max = IGD_VCO_MAX },
@@ -478,6 +525,8 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
 		limit = &intel_limits[INTEL_LIMIT_G4X_HDMI_DAC];
 	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
 		limit = &intel_limits[INTEL_LIMIT_G4X_SDVO];
+	} else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits[INTEL_LIMIT_G4X_DISPLAY_PORT];
 	} else /* The option is for other outputs */
 		limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
 
@@ -764,6 +813,35 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 	return found;
 }
 
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *best_clock)
+{
+    intel_clock_t clock;
+    if (target < 200000) {
+	clock.dot = 161670;
+	clock.p = 20;
+	clock.p1 = 2;
+	clock.p2 = 10;
+	clock.n = 0x01;
+	clock.m = 97;
+	clock.m1 = 0x10;
+	clock.m2 = 0x05;
+    } else {
+	clock.dot = 270000;
+	clock.p = 10;
+	clock.p1 = 1;
+	clock.p2 = 10;
+	clock.n = 0x02;
+	clock.m = 108;
+	clock.m1 = 0x12;
+	clock.m2 = 0x06;
+    }
+    memcpy(best_clock, &clock, sizeof(intel_clock_t));
+    return true;
+}
+
 void
 intel_wait_for_vblank(struct drm_device *dev)
 {
@@ -1541,7 +1619,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	intel_clock_t clock;
 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
 	bool ok, is_sdvo = false, is_dvo = false;
-	bool is_crt = false, is_lvds = false, is_tv = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
 	const intel_limit_t *limit;
@@ -1585,6 +1663,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		case INTEL_OUTPUT_ANALOG:
 			is_crt = true;
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
 		}
 
 		num_outputs++;
@@ -1600,6 +1681,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 	} else {
 		refclk = 48000;
 	}
+	
 
 	/*
 	 * Returns a set of divisors for the desired target clock with the given
@@ -1662,6 +1744,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			else if (IS_IGDNG(dev))
 				dpll |= (sdvo_pixel_multiply - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
 		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
 
 		/* compute bitmask from p1 value */
 		if (IS_IGD(dev))
@@ -1809,6 +1893,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(lvds_reg, lvds);
 		I915_READ(lvds_reg);
 	}
+	if (is_dp)
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 
 	I915_WRITE(fp_reg, fp);
 	I915_WRITE(dpll_reg, dpll);
@@ -2475,6 +2561,8 @@ static void intel_setup_outputs(struct drm_device *dev)
 			found = intel_sdvo_init(dev, SDVOB);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOB);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_B);
 		}
 
 		/* Before G4X SDVOC doesn't have its own detect register */
@@ -2487,7 +2575,11 @@ static void intel_setup_outputs(struct drm_device *dev)
 			found = intel_sdvo_init(dev, SDVOC);
 			if (!found && SUPPORTS_INTEGRATED_HDMI(dev))
 				intel_hdmi_init(dev, SDVOC);
+			if (!found && SUPPORTS_INTEGRATED_DP(dev))
+				intel_dp_init(dev, DP_C);
 		}
+		if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED))
+			intel_dp_init(dev, DP_D);
 	} else
 		intel_dvo_init(dev);
 
@@ -2530,6 +2622,11 @@ static void intel_setup_outputs(struct drm_device *dev)
 				     (1 << 1));
 			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
 			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			crtc_mask = ((1 << 0) |
+				     (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_DISPLAYPORT);
+			break;
 		}
 		encoder->possible_crtcs = crtc_mask;
 		encoder->possible_clones = intel_connector_clones(dev, clone_mask);

drivers/gpu/drm/i915/intel_dp.h

+/*
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DP_H_
+#define _INTEL_DP_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+#define	DP_LINK_BW_SET		0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+
+#define DP_LANE_COUNT_SET	0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	0x102
+
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+#define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+#define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+#define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+#define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+struct i2c_algo_dp_aux_data {
+	bool running;
+	u16 address;
+	int (*aux_ch) (struct i2c_adapter *adapter,
+		       uint8_t *send, int send_bytes,
+		       uint8_t *recv, int recv_bytes);
+};
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
+
+#endif /* _INTEL_DP_H_ */

drivers/gpu/drm/i915/intel_dp_i2c.c

+/*
+ * Copyright © 2009 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include "intel_dp.h"
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+			    uint8_t write_byte, uint8_t *read_byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	uint16_t address = algo_data->address;
+	uint8_t msg[5];
+	uint8_t reply[2];
+	int msg_bytes;
+	int reply_bytes;
+	int ret;
+
+	/* Set up the command byte */
+	if (mode & MODE_I2C_READ)
+		msg[0] = AUX_I2C_READ << 4;
+	else
+		msg[0] = AUX_I2C_WRITE << 4;
+
+	if (!(mode & MODE_I2C_STOP))
+		msg[0] |= AUX_I2C_MOT << 4;
+
+	msg[1] = address >> 8;
+	msg[2] = address;
+
+	switch (mode) {
+	case MODE_I2C_WRITE:
+		msg[3] = 0;
+		msg[4] = write_byte;
+		msg_bytes = 5;
+		reply_bytes = 1;
+		break;
+	case MODE_I2C_READ:
+		msg[3] = 0;
+		msg_bytes = 4;
+		reply_bytes = 2;
+		break;
+	default:
+		msg_bytes = 3;
+		reply_bytes = 1;
+		break;
+	}
+
+	for (;;) {
+		ret = (*algo_data->aux_ch)(adapter,
+					   msg, msg_bytes,
+					   reply, reply_bytes);
+		if (ret < 0) {
+			printk(KERN_ERR "aux_ch failed %d\n", ret);
+			return ret;
+		}
+		switch (reply[0] & AUX_I2C_REPLY_MASK) {
+		case AUX_I2C_REPLY_ACK:
+			if (mode == MODE_I2C_READ) {
+				*read_byte = reply[1];
+			}
+			return reply_bytes - 1;
+		case AUX_I2C_REPLY_NACK:
+			printk(KERN_ERR "aux_ch nack\n");
+			return -EREMOTEIO;
+		case AUX_I2C_REPLY_DEFER:
+			printk(KERN_ERR "aux_ch defer\n");
+			udelay(100);
+			break;
+		default:
+			printk(KERN_ERR "aux_ch invalid reply 0x%02x\n", reply[0]);
+			return -EREMOTEIO;
+		}
+	}
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_START;
+	int ret;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	algo_data->address = address;
+	algo_data->running = true;
+	ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+	return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int mode = MODE_I2C_STOP;
+
+	if (reading)
+		mode |= MODE_I2C_READ;
+	else
+		mode |= MODE_I2C_WRITE;
+	if (algo_data->running) {
+		(void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+		algo_data->running = false;
+	}
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+	return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+	struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+	int ret;
+
+	if (!algo_data->running)
+		return -EIO;
+
+	ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+	return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+		     struct i2c_msg *msgs,
+		     int num)
+{
+	int ret = 0;
+	bool reading = false;
+	int m;
+	int b;
+
+	for (m = 0; m < num; m++) {
+		u16 len = msgs[m].len;
+		u8 *buf = msgs[m].buf;
+		reading = (msgs[m].flags & I2C_M_RD) != 0;
+		ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+		if (ret < 0)
+			break;
+		if (reading) {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+				if (ret < 0)
+					break;
+			}
+		} else {
+			for (b = 0; b < len; b++) {
+				ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+				if (ret < 0)
+					break;
+			}
+		}
+		if (ret < 0)
+			break;
+	}
+	if (ret >= 0)
+		ret = num;
+	i2c_algo_dp_aux_stop(adapter, reading);
+	printk(KERN_ERR "dp_aux_xfer return %d\n", ret);
+	return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+	       I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+	       I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+	.master_xfer	= i2c_algo_dp_aux_xfer,
+	.functionality	= i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+	(void) i2c_algo_dp_aux_address(adapter, 0, false);
+	(void) i2c_algo_dp_aux_stop(adapter, false);
+					   
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+	adapter->algo = &i2c_dp_aux_algo;
+	adapter->retries = 3;
+	i2c_dp_aux_reset_bus(adapter);
+	return 0;
+}
+
+int
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+	int error;
+	
+	error = i2c_dp_aux_prepare_bus(adapter);
+	if (error)
+		return error;
+	error = i2c_add_adapter(adapter);
+	return error;
+}
+EXPORT_SYMBOL(i2c_dp_aux_add_bus);

drivers/gpu/drm/i915/intel_drv.h

@@ -54,6 +54,7 @@
 #define INTEL_OUTPUT_LVDS 4
 #define INTEL_OUTPUT_TVOUT 5
 #define INTEL_OUTPUT_HDMI 6
+#define INTEL_OUTPUT_DISPLAYPORT 7
 
 #define INTEL_DVO_CHIP_NONE 0
 #define INTEL_DVO_CHIP_LVDS 1
@@ -116,6 +117,10 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
 extern void intel_lvds_init(struct drm_device *dev);
+extern void intel_dp_init(struct drm_device *dev, int dp_reg);
+void
+intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
+		 struct drm_display_mode *adjusted_mode);
 
 extern void intel_crtc_load_lut(struct drm_crtc *crtc);
 extern void intel_encoder_prepare (struct drm_encoder *encoder);