提交 a4d7d550 编写于 作者: K Kuninori Morimoto 提交者: Mark Brown

ASoC: Add SuperH FSI driver support for ALSA

This driver is very simple.
It support playback only now.
This patch is tested by ms7724se board.
Signed-off-by: NKuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 f61c890e
#ifndef __SOUND_FSI_H
#define __SOUND_FSI_H
/*
* Fifo-attached Serial Interface (FSI) support for SH7724
*
* Copyright (C) 2009 Renesas Solutions Corp.
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* flags format
* 0xABCDEEFF
*
* A: channel size for TDM (input)
* B: channel size for TDM (ooutput)
* C: inversion
* D: mode
* E: input format
* F: output format
*/
#include <linux/clk.h>
#include <sound/soc.h>
/* TDM channel */
#define SH_FSI_SET_CH_I(x) ((x & 0xF) << 28)
#define SH_FSI_SET_CH_O(x) ((x & 0xF) << 24)
#define SH_FSI_CH_IMASK 0xF0000000
#define SH_FSI_CH_OMASK 0x0F000000
#define SH_FSI_GET_CH_I(x) ((x & SH_FSI_CH_IMASK) >> 28)
#define SH_FSI_GET_CH_O(x) ((x & SH_FSI_CH_OMASK) >> 24)
/* clock inversion */
#define SH_FSI_INVERSION_MASK 0x00F00000
#define SH_FSI_LRM_INV (1 << 20)
#define SH_FSI_BRM_INV (1 << 21)
#define SH_FSI_LRS_INV (1 << 22)
#define SH_FSI_BRS_INV (1 << 23)
/* mode */
#define SH_FSI_MODE_MASK 0x000F0000
#define SH_FSI_IN_SLAVE_MODE (1 << 16) /* default master mode */
#define SH_FSI_OUT_SLAVE_MODE (1 << 17) /* default master mode */
/* DI format */
#define SH_FSI_FMT_MASK 0x000000FF
#define SH_FSI_IFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 8)
#define SH_FSI_OFMT(x) (((SH_FSI_FMT_ ## x) & SH_FSI_FMT_MASK) << 0)
#define SH_FSI_GET_IFMT(x) ((x >> 8) & SH_FSI_FMT_MASK)
#define SH_FSI_GET_OFMT(x) ((x >> 0) & SH_FSI_FMT_MASK)
#define SH_FSI_FMT_MONO (1 << 0)
#define SH_FSI_FMT_MONO_DELAY (1 << 1)
#define SH_FSI_FMT_PCM (1 << 2)
#define SH_FSI_FMT_I2S (1 << 3)
#define SH_FSI_FMT_TDM (1 << 4)
#define SH_FSI_FMT_TDM_DELAY (1 << 5)
#define SH_FSI_IFMT_TDM_CH(x) \
(SH_FSI_IFMT(TDM) | SH_FSI_SET_CH_I(x))
#define SH_FSI_IFMT_TDM_DELAY_CH(x) \
(SH_FSI_IFMT(TDM_DELAY) | SH_FSI_SET_CH_I(x))
#define SH_FSI_OFMT_TDM_CH(x) \
(SH_FSI_OFMT(TDM) | SH_FSI_SET_CH_O(x))
#define SH_FSI_OFMT_TDM_DELAY_CH(x) \
(SH_FSI_OFMT(TDM_DELAY) | SH_FSI_SET_CH_O(x))
struct sh_fsi_platform_info {
unsigned long porta_flags;
unsigned long portb_flags;
};
extern struct snd_soc_dai fsi_soc_dai[2];
extern struct snd_soc_platform fsi_soc_platform;
#endif /* __SOUND_FSI_H */
...@@ -20,7 +20,12 @@ config SND_SOC_SH4_HAC ...@@ -20,7 +20,12 @@ config SND_SOC_SH4_HAC
config SND_SOC_SH4_SSI config SND_SOC_SH4_SSI
tristate tristate
config SND_SOC_SH4_FSI
tristate "SH4 FSI support"
depends on CPU_SUBTYPE_SH7724
select SH_DMA
help
This option enables FSI sound support
## ##
## Boards ## Boards
......
...@@ -5,8 +5,10 @@ obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o ...@@ -5,8 +5,10 @@ obj-$(CONFIG_SND_SOC_PCM_SH7760) += snd-soc-dma-sh7760.o
## audio units found on some SH-4 ## audio units found on some SH-4
snd-soc-hac-objs := hac.o snd-soc-hac-objs := hac.o
snd-soc-ssi-objs := ssi.o snd-soc-ssi-objs := ssi.o
snd-soc-fsi-objs := fsi.o
obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o obj-$(CONFIG_SND_SOC_SH4_HAC) += snd-soc-hac.o
obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o obj-$(CONFIG_SND_SOC_SH4_SSI) += snd-soc-ssi.o
obj-$(CONFIG_SND_SOC_SH4_FSI) += snd-soc-fsi.o
## boards ## boards
snd-soc-sh7760-ac97-objs := sh7760-ac97.o snd-soc-sh7760-ac97-objs := sh7760-ac97.o
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册