提交 a4b3518d 编写于 作者: D Dong Aisheng 提交者: Stephen Boyd

clk: core: support clocks which requires parents enable (part 1)

On Freescale i.MX7D platform, all clocks operations, including
enable/disable, rate change and re-parent, requires its parent
clock enable. Current clock core can not support it well.
This patch introduce a new flag CLK_OPS_PARENT_ENABLE to handle this
special case in clock core that enable its parent clock firstly for
each operation and disable it later after operation complete.

The patch part 1 fixes the possible disabling clocks while its parent
is off during kernel booting phase in clk_disable_unused_subtree().

Before the completion of kernel booting, clock tree is still not built
completely, there may be a case that the child clock is on but its
parent is off which could be caused by either HW initial reset state
or bootloader initialization.

Taking bootloader as an example, we may enable all clocks in HW by default.
And during kernel booting time, the parent clock could be disabled in its
driver probe due to calling clk_prepare_enable and clk_disable_unprepare.
Because it's child clock is only enabled in HW while its SW usecount
in clock tree is still 0, so clk_disable of parent clock will gate
the parent clock in both HW and SW usecount ultimately. Then there will
be a child clock is still on in HW but its parent is already off.

Later in clk_disable_unused(), this clock disable accessing while its
parent off will cause system hang due to the limitation of HW which
must require its parent on.

This patch simply enables the parent clock first before disabling
if flag CLK_OPS_PARENT_ENABLE is set in clk_disable_unused_subtree().
This is a simple solution and only affects booting time.

After kernel booting up the clock tree is already created, there will
be no case that child is off but its parent is off.
So no need do this checking for normal clk_disable() later.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
上级 7ec986ef
...@@ -765,6 +765,9 @@ static void clk_disable_unused_subtree(struct clk_core *core) ...@@ -765,6 +765,9 @@ static void clk_disable_unused_subtree(struct clk_core *core)
hlist_for_each_entry(child, &core->children, child_node) hlist_for_each_entry(child, &core->children, child_node)
clk_disable_unused_subtree(child); clk_disable_unused_subtree(child);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_prepare_enable(core->parent);
flags = clk_enable_lock(); flags = clk_enable_lock();
if (core->enable_count) if (core->enable_count)
...@@ -789,6 +792,8 @@ static void clk_disable_unused_subtree(struct clk_core *core) ...@@ -789,6 +792,8 @@ static void clk_disable_unused_subtree(struct clk_core *core)
unlock_out: unlock_out:
clk_enable_unlock(flags); clk_enable_unlock(flags);
if (core->flags & CLK_OPS_PARENT_ENABLE)
clk_core_disable_unprepare(core->parent);
} }
static bool clk_ignore_unused; static bool clk_ignore_unused;
......
...@@ -33,6 +33,8 @@ ...@@ -33,6 +33,8 @@
#define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */ #define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
#define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */ #define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */
#define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */ #define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */
/* parents need enable during gate/ungate, set rate and re-parent */
#define CLK_OPS_PARENT_ENABLE BIT(12)
struct clk; struct clk;
struct clk_hw; struct clk_hw;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册