tty: remove remaining Hayes ESP ioctls

As Jeff Dike pointed out, the Hayes ESP driver was removed in commit
f53a2ade, so these ioctl definitions
should also be removed.  This cleans up the remaining arch-specific
locations of this ioctl value.

Thanks to Arnd for pointing these out.

Cc: Jeff Dike <jdike@addtoit.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

arch/alpha/include/asm/ioctls.h

@@ -106,7 +106,5 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
 
 #endif /* _ASM_ALPHA_IOCTLS_H */

arch/avr32/include/asm/ioctls.h

@@ -72,8 +72,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

arch/cris/include/asm/ioctls.h

@@ -70,8 +70,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 #define TIOCSERSETRS485	0x5461  /* enable rs-485 (deprecated) */

arch/ia64/include/asm/ioctls.h

@@ -75,8 +75,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

arch/m32r/include/asm/ioctls.h

@@ -69,8 +69,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

arch/mips/include/asm/ioctls.h

@@ -103,7 +103,5 @@
 #define TIOCSERSETMULTI 0x5490 /* Set multiport config */
 #define TIOCMIWAIT      0x5491 /* wait for a change on serial input line(s) */
 #define TIOCGICOUNT     0x5492 /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP	0x5493 /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP	0x5494 /* Set Hayes ESP configuration */
 
 #endif /* __ASM_IOCTLS_H */

arch/mn10300/include/asm/ioctls.h

@@ -70,8 +70,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460
 
 /* Used for packet mode */

arch/parisc/include/asm/ioctls.h

@@ -68,8 +68,6 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
 #define FIOQSIZE	0x5460	/* Get exact space used by quota */
 
 #define TIOCSTART	0x5461