提交 a3a29b55 编写于 作者: P Peter Ujfalusi 提交者: Liam Girdwood

ASoC: TWL4030: Add functionalty to reset the registers

Machine driver can instruct the codec driver to reset the
chip registers to their default values at probe time.

If machine driver does not provide setup data, then the
registers are going to be reseted to their defaults, to
be safe.

If the developer on the platform confirms that the register
reset is not needed, than it can be skipped, saving ~20ms
time in probe.

As safety measure do the register reset at remove time also.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
上级 2046f175
......@@ -262,6 +262,17 @@ static inline void twl4030_check_defaults(struct snd_soc_codec *codec)
difference, difference ? "Not OK" : "OK");
}
static inline void twl4030_reset_registers(struct snd_soc_codec *codec)
{
int i;
/* set all audio section registers to reasonable defaults */
for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
if (i != TWL4030_REG_APLL_CTL)
twl4030_write(codec, i, twl4030_reg[i]);
}
static void twl4030_init_chip(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
......@@ -275,6 +286,10 @@ static void twl4030_init_chip(struct platform_device *pdev)
if (setup && setup->check_defaults)
twl4030_check_defaults(codec);
/* Reset registers, if no setup data or if instructed to do so */
if (!setup || (setup && setup->reset_registers))
twl4030_reset_registers(codec);
/* Refresh APLL_CTL register from HW */
twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte,
TWL4030_REG_APLL_CTL);
......@@ -2271,6 +2286,8 @@ static int twl4030_soc_remove(struct platform_device *pdev)
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
/* Reset registers to their chip default before leaving */
twl4030_reset_registers(codec);
twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
......
......@@ -44,6 +44,7 @@ struct twl4030_setup_data {
unsigned int sysclk;
unsigned int offset_cncl_path;
unsigned int check_defaults:1;
unsigned int reset_registers:1;
unsigned int hs_extmute:1;
void (*set_hs_extmute)(int mute);
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册