Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 a394c6a0 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia 

Pull PCMCIA update from Dominik Brodowski:
 "A few PCMCIA fixes and cleanups are available in the PCMCIA tree.

  Most of them are trivial and self-explanatory.  Of particular note are
  the last three patches which add an important hardware quirk for
  Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
  sockets), fix resource leaks in yenta_socket enable/disable call
  paths, and fix a regression caused by patch 1c6c9b1d since v4.0.

  Alan stated he is OK with me pushing this patch upstream.  Once it
  works out well in your tree, I will push it to stable for 4.0/4.1 as
  well"

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
  pcmcia: do not break rsrc_nonstatic when handling anonymous cards
  pcmcia: Fix resource leaks in yenta_probe() and _close()
  Disable write buffering on Toshiba ToPIC95
  pcmcia: Convert dev_printk to dev_<level>
  pcmcia/vrc4171: Remove typedefs for enums and struct
  pcmcia: Remove typedef in structs and emum
  pcmcia: Remove typedef tuple_flags
  drivers: pcmcia: electra_cf.c fix checkpatch error and warnings
  drivers: pcmcia: ds.c fix checkpatch errors
  PCMCIA: Remove commented references to dead class_device_create_file()
  drivers/pcmcia/electra_cf.c: add missing iounmap and kfree
  pcmcia: replace open-coded ARRAY_SIZE with macro
上级 d8133356 e8e68fd8
隐藏空白更改
内联 并排
Showing with 249 addition and 264 deletion
drivers/char/pcmcia/cm4040_cs.c
浏览文件 @ a394c6a0
......@@ -532,9 +532,8 @@ static int reader_config(struct pcmcia_device *link, int devno)
fail_rc = pcmcia_enable_device(link);
if (fail_rc != 0) {
dev_printk(KERN_INFO, &link->dev,
"pcmcia_enable_device failed 0x%x\n",
fail_rc);
dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n",
fail_rc);
goto cs_release;
}
......
drivers/pcmcia/cistpl.c
浏览文件 @ a394c6a0
......@@ -94,8 +94,7 @@ static void __iomem *set_cis_map(struct pcmcia_socket *s,
mem->res = pcmcia_find_mem_region(0, s->map_size,
s->map_size, 0, s);
if (mem->res == NULL) {
dev_printk(KERN_NOTICE, &s->dev,
"cs: unable to map card memory!\n");
dev_notice(&s->dev, "cs: unable to map card memory!\n");
return NULL;
}
s->cis_virt = NULL;
......@@ -381,8 +380,7 @@ int verify_cis_cache(struct pcmcia_socket *s)
buf = kmalloc(256, GFP_KERNEL);
if (buf == NULL) {
dev_printk(KERN_WARNING, &s->dev,
"no memory for verifying CIS\n");
dev_warn(&s->dev, "no memory for verifying CIS\n");
return -ENOMEM;
}
mutex_lock(&s->ops_mutex);
......@@ -414,14 +412,14 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
const u8 *data, const size_t len)
{
if (len > CISTPL_MAX_CIS_SIZE) {
dev_printk(KERN_WARNING, &s->dev, "replacement CIS too big\n");
dev_warn(&s->dev, "replacement CIS too big\n");
return -EINVAL;
}
mutex_lock(&s->ops_mutex);
kfree(s->fake_cis);
s->fake_cis = kmalloc(len, GFP_KERNEL);
if (s->fake_cis == NULL) {
dev_printk(KERN_WARNING, &s->dev, "no memory to replace CIS\n");
dev_warn(&s->dev, "no memory to replace CIS\n");
mutex_unlock(&s->ops_mutex);
return -ENOMEM;
}
......@@ -434,17 +432,17 @@ int pcmcia_replace_cis(struct pcmcia_socket *s,
/* The high-level CIS tuple services */
typedef struct tuple_flags {
struct tuple_flags {
u_int link_space:4;
u_int has_link:1;
u_int mfc_fn:3;
u_int space:4;
} tuple_flags;
};
#define LINK_SPACE(f) (((tuple_flags *)(&(f)))->link_space)
#define HAS_LINK(f) (((tuple_flags *)(&(f)))->has_link)
#define MFC_FN(f) (((tuple_flags *)(&(f)))->mfc_fn)
#define SPACE(f) (((tuple_flags *)(&(f)))->space)
#define LINK_SPACE(f) (((struct tuple_flags *)(&(f)))->link_space)
#define HAS_LINK(f) (((struct tuple_flags *)(&(f)))->has_link)
#define MFC_FN(f) (((struct tuple_flags *)(&(f)))->mfc_fn)
#define SPACE(f) (((struct tuple_flags *)(&(f)))->space)
int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function,
tuple_t *tuple)
......@@ -1451,26 +1449,16 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
done:
/* invalidate CIS cache on failure */
if (!dev_ok || !ident_ok || !count) {
#if defined(CONFIG_MTD_PCMCIA_ANONYMOUS)
/* Set up as an anonymous card. If we don't have anonymous
memory support then just error the card as there is no
point trying to second guess.
Note: some cards have just a device entry, it may be
worth extending support to cover these in future */
if (!dev_ok || !ident_ok) {
dev_info(&s->dev, "no CIS, assuming an anonymous memory card.\n");
pcmcia_replace_cis(s, "\xFF", 1);
count = 1;
ret = 0;
} else
#endif
{
mutex_lock(&s->ops_mutex);
destroy_cis_cache(s);
mutex_unlock(&s->ops_mutex);
mutex_lock(&s->ops_mutex);
destroy_cis_cache(s);
mutex_unlock(&s->ops_mutex);
/* We differentiate between dev_ok, ident_ok and count
failures to allow for an override for anonymous cards
in ds.c */
if (!dev_ok || !ident_ok)
ret = -EIO;
}
else
ret = -EFAULT;
}
if (info)
......
drivers/pcmcia/cs.c
浏览文件 @ a394c6a0
......@@ -177,8 +177,8 @@ int pcmcia_register_socket(struct pcmcia_socket *socket)
wait_for_completion(&socket->thread_done);
if (!socket->thread) {
dev_printk(KERN_WARNING, &socket->dev,
"PCMCIA: warning: socket thread did not start\n");
dev_warn(&socket->dev,
"PCMCIA: warning: socket thread did not start\n");
return -EIO;
}
......@@ -275,7 +275,7 @@ static int socket_reset(struct pcmcia_socket *skt)
msleep(unreset_check * 10);
}
dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
dev_err(&skt->dev, "time out after reset\n");
return -ETIMEDOUT;
}
......@@ -325,8 +325,8 @@ static void socket_shutdown(struct pcmcia_socket *s)
s->ops->get_status(s, &status);
if (status & SS_POWERON) {
dev_printk(KERN_ERR, &s->dev,
"*** DANGER *** unable to remove socket power\n");
dev_err(&s->dev,
"*** DANGER *** unable to remove socket power\n");
}
s->state &= ~SOCKET_INUSE;
......@@ -356,15 +356,13 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
}
if (status & SS_PENDING) {
dev_printk(KERN_ERR, &skt->dev,
"voltage interrogation timed out.\n");
dev_err(&skt->dev, "voltage interrogation timed out\n");
return -ETIMEDOUT;
}
if (status & SS_CARDBUS) {
if (!(skt->features & SS_CAP_CARDBUS)) {
dev_printk(KERN_ERR, &skt->dev,
"cardbus cards are not supported.\n");
dev_err(&skt->dev, "cardbus cards are not supported\n");
return -EINVAL;
}
skt->state |= SOCKET_CARDBUS;
......@@ -379,7 +377,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
else if (!(status & SS_XVCARD))
skt->socket.Vcc = skt->socket.Vpp = 50;
else {
dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
dev_err(&skt->dev, "unsupported voltage key\n");
return -EIO;
}
......@@ -396,7 +394,7 @@ static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
skt->ops->get_status(skt, &status);
if (!(status & SS_POWERON)) {
dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
dev_err(&skt->dev, "unable to apply power\n");
return -EIO;
}
......@@ -429,8 +427,7 @@ static int socket_insert(struct pcmcia_socket *skt)
if (ret == 0) {
skt->state |= SOCKET_PRESENT;
dev_printk(KERN_NOTICE, &skt->dev,
"pccard: %s card inserted into slot %d\n",
dev_notice(&skt->dev, "pccard: %s card inserted into slot %d\n",
(skt->state & SOCKET_CARDBUS) ? "CardBus" : "PCMCIA",
skt->sock);
......@@ -558,8 +555,7 @@ static int socket_resume(struct pcmcia_socket *skt)
static void socket_remove(struct pcmcia_socket *skt)
{
dev_printk(KERN_NOTICE, &skt->dev,
"pccard: card ejected from slot %d\n", skt->sock);
dev_notice(&skt->dev, "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
}
......@@ -605,8 +601,7 @@ static int pccardd(void *__skt)
/* register with the device core */
ret = device_register(&skt->dev);
if (ret) {
dev_printk(KERN_WARNING, &skt->dev,
"PCMCIA: unable to register socket\n");
dev_warn(&skt->dev, "PCMCIA: unable to register socket\n");
skt->thread = NULL;
complete(&skt->thread_done);
return 0;
......
drivers/pcmcia/ds.c
浏览文件 @ a394c6a0
......@@ -81,8 +81,8 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
struct pcmcia_dynid {
struct list_head node;
struct pcmcia_device_id id;
struct list_head node;
struct pcmcia_device_id id;
};
/**
......@@ -284,8 +284,8 @@ static int pcmcia_device_probe(struct device *dev)
dev_dbg(dev, "base %x, regs %x", p_dev->config_base,
p_dev->config_regs);
} else {
dev_printk(KERN_INFO, dev,
"pcmcia: could not parse base and rmask0 of CIS\n");
dev_info(dev,
"pcmcia: could not parse base and rmask0 of CIS\n");
p_dev->config_base = 0;
p_dev->config_regs = 0;
}
......@@ -382,15 +382,15 @@ static int pcmcia_device_remove(struct device *dev)
/* check for proper unloading */
if (p_dev->_irq || p_dev->_io || p_dev->_locked)
dev_printk(KERN_INFO, dev,
"pcmcia: driver %s did not release config properly\n",
p_drv->name);
dev_info(dev,
"pcmcia: driver %s did not release config properly\n",
p_drv->name);
for (i = 0; i < MAX_WIN; i++)
if (p_dev->_win & CLIENT_WIN_REQ(i))
dev_printk(KERN_INFO, dev,
"pcmcia: driver %s did not release window properly\n",
p_drv->name);
dev_info(dev,
"pcmcia: driver %s did not release window properly\n",
p_drv->name);
/* references from pcmcia_probe_device */
pcmcia_put_dev(p_dev);
......@@ -566,7 +566,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
c->io[i].name = p_dev->devname;
c->io[i].flags = IORESOURCE_IO;
}
for (i = 0; i< MAX_WIN; i++) {
for (i = 0; i < MAX_WIN; i++) {
c->mem[i].name = p_dev->devname;
c->mem[i].flags = IORESOURCE_MEM;
}
......@@ -578,8 +578,7 @@ static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
mutex_unlock(&s->ops_mutex);
dev_printk(KERN_NOTICE, &p_dev->dev,
"pcmcia: registering new device %s (IRQ: %d)\n",
dev_notice(&p_dev->dev, "pcmcia: registering new device %s (IRQ: %d)\n",
p_dev->devname, p_dev->irq);
pcmcia_device_query(p_dev);
......@@ -634,8 +633,24 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
ret = pccard_validate_cis(s, &no_chains);
if (ret || !no_chains) {
dev_dbg(&s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
#if defined(CONFIG_MTD_PCMCIA_ANONYMOUS)
/* Set up as an anonymous card. If we don't have anonymous
memory support then just error the card as there is no
point trying to second guess.
Note: some cards have just a device entry, it may be
worth extending support to cover these in future */
if (ret == -EIO) {
dev_info(&s->dev, "no CIS, assuming an anonymous memory card.\n");
pcmcia_replace_cis(s, "\xFF", 1);
no_chains = 1;
ret = 0;
} else
#endif
{
dev_dbg(&s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
}
}
if (!pccard_read_tuple(s, BIND_FN_ALL, CISTPL_LONGLINK_MFC, &mfc))
......@@ -651,7 +666,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s)
}
static int pcmcia_requery_callback(struct device *dev, void * _data)
static int pcmcia_requery_callback(struct device *dev, void *_data)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
if (!p_dev->dev.driver) {
......@@ -729,7 +744,7 @@ static void pcmcia_requery(struct pcmcia_socket *s)
* the one provided by the card is broken. The firmware files reside in
* /lib/firmware/ in userspace.
*/
static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
static int pcmcia_load_firmware(struct pcmcia_device *dev, char *filename)
{
struct pcmcia_socket *s = dev->socket;
const struct firmware *fw;
......@@ -745,16 +760,14 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
if (request_firmware(&fw, filename, &dev->dev) == 0) {
if (fw->size >= CISTPL_MAX_CIS_SIZE) {
ret = -EINVAL;
dev_printk(KERN_ERR, &dev->dev,
"pcmcia: CIS override is too big\n");
dev_err(&dev->dev, "pcmcia: CIS override is too big\n");
goto release;
}
if (!pcmcia_replace_cis(s, fw->data, fw->size))
ret = 0;
else {
dev_printk(KERN_ERR, &dev->dev,
"pcmcia: CIS override failed\n");
dev_err(&dev->dev, "pcmcia: CIS override failed\n");
goto release;
}
......@@ -781,7 +794,8 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
#else /* !CONFIG_PCMCIA_LOAD_CIS */
static inline int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
static inline int pcmcia_load_firmware(struct pcmcia_device *dev,
char *filename)
{
return -ENODEV;
}
......@@ -1148,10 +1162,9 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state)
if (p_drv->suspend) {
ret = p_drv->suspend(p_dev);
if (ret) {
dev_printk(KERN_ERR, dev,
"pcmcia: device %s (driver %s) did "
"not want to go to sleep (%d)\n",
p_dev->devname, p_drv->name, ret);
dev_err(dev,
"pcmcia: device %s (driver %s) did not want to go to sleep (%d)\n",
p_dev->devname, p_drv->name, ret);
mutex_lock(&p_dev->socket->ops_mutex);
p_dev->suspended = 0;
mutex_unlock(&p_dev->socket->ops_mutex);
......@@ -1206,7 +1219,7 @@ static int pcmcia_dev_resume(struct device *dev)
}
static int pcmcia_bus_suspend_callback(struct device *dev, void * _data)
static int pcmcia_bus_suspend_callback(struct device *dev, void *_data)
{
struct pcmcia_socket *skt = _data;
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
......@@ -1217,7 +1230,7 @@ static int pcmcia_bus_suspend_callback(struct device *dev, void * _data)
return runtime_suspend(dev);
}
static int pcmcia_bus_resume_callback(struct device *dev, void * _data)
static int pcmcia_bus_resume_callback(struct device *dev, void *_data)
{
struct pcmcia_socket *skt = _data;
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
......@@ -1342,14 +1355,13 @@ static int pcmcia_bus_add_socket(struct device *dev,
socket = pcmcia_get_socket(socket);
if (!socket) {
dev_printk(KERN_ERR, dev,
"PCMCIA obtaining reference to socket failed\n");
dev_err(dev, "PCMCIA obtaining reference to socket failed\n");
return -ENODEV;
}
ret = sysfs_create_bin_file(&dev->kobj, &pccard_cis_attr);
if (ret) {
dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
dev_err(dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return ret;
}
......@@ -1361,7 +1373,7 @@ static int pcmcia_bus_add_socket(struct device *dev,
ret = pccard_register_pcmcia(socket, &pcmcia_bus_callback);
if (ret) {
dev_printk(KERN_ERR, dev, "PCMCIA registration failed\n");
dev_err(dev, "PCMCIA registration failed\n");
pcmcia_put_socket(socket);
return ret;
}
......
drivers/pcmcia/electra_cf.c
浏览文件 @ a394c6a0
......@@ -48,14 +48,14 @@ struct electra_cf_socket {
struct platform_device *ofdev;
unsigned long mem_phys;
void __iomem * mem_base;
void __iomem *mem_base;
unsigned long mem_size;
void __iomem * io_virt;
void __iomem *io_virt;
unsigned int io_base;
unsigned int io_size;
u_int irq;
struct resource iomem;
void __iomem * gpio_base;
void __iomem *gpio_base;
int gpio_detect;
int gpio_vsense;
int gpio_3v;
......@@ -202,7 +202,7 @@ static int electra_cf_probe(struct platform_device *ofdev)
if (err)
return -EINVAL;
cf = kzalloc(sizeof *cf, GFP_KERNEL);
cf = kzalloc(sizeof(*cf), GFP_KERNEL);
if (!cf)
return -ENOMEM;
......@@ -216,8 +216,10 @@ static int electra_cf_probe(struct platform_device *ofdev)
cf->io_size = PAGE_ALIGN(resource_size(&io));
area = __get_vm_area(cf->io_size, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
if (area == NULL) {
status = -ENOMEM;
goto fail1;
}
cf->io_virt = (void __iomem *)(area->addr);
......@@ -320,7 +322,8 @@ static int electra_cf_probe(struct platform_device *ofdev)
iounmap(cf->mem_base);
if (cf->gpio_base)
iounmap(cf->gpio_base);
device_init_wakeup(&ofdev->dev, 0);
if (area)
device_init_wakeup(&ofdev->dev, 0);
kfree(cf);
return status;
......@@ -369,5 +372,5 @@ static struct platform_driver electra_cf_driver = {
module_platform_driver(electra_cf_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi Electra CF driver");
drivers/pcmcia/i82365.c
浏览文件 @ a394c6a0
......@@ -132,14 +132,14 @@ module_param(recov_time, int, 0444);
/*====================================================================*/
typedef struct cirrus_state_t {
struct cirrus_state {
u_char misc1, misc2;
u_char timer[6];
} cirrus_state_t;
};
typedef struct vg46x_state_t {
struct vg46x_state {
u_char ctl, ema;
} vg46x_state_t;
};
struct i82365_socket {
u_short type, flags;
......@@ -149,8 +149,8 @@ struct i82365_socket {
u_short psock;
u_char cs_irq, intr;
union {
cirrus_state_t cirrus;
vg46x_state_t vg46x;
struct cirrus_state cirrus;
struct vg46x_state vg46x;
} state;
};
......@@ -173,11 +173,11 @@ static struct timer_list poll_timer;
/*====================================================================*/
/* These definitions must match the pcic table! */
typedef enum pcic_id {
enum pcic_id {
IS_I82365A, IS_I82365B, IS_I82365DF,
IS_IBM, IS_RF5Cx96, IS_VLSI, IS_VG468, IS_VG469,
IS_PD6710, IS_PD672X, IS_VT83C469,
} pcic_id;
};
/* Flags for classifying groups of controllers */
#define IS_VADEM 0x0001
......@@ -189,12 +189,12 @@ typedef enum pcic_id {
#define IS_REGISTERED 0x2000
#define IS_ALIVE 0x8000
typedef struct pcic_t {
struct pcic {
char *name;
u_short flags;
} pcic_t;
};
static pcic_t pcic[] = {
static struct pcic pcic[] = {
{ "Intel i82365sl A step", 0 },
{ "Intel i82365sl B step", 0 },
{ "Intel i82365sl DF", IS_DF_PWR },
......@@ -208,7 +208,7 @@ static pcic_t pcic[] = {
{ "VIA VT83C469", IS_CIRRUS|IS_VIA },
};
#define PCIC_COUNT (sizeof(pcic)/sizeof(pcic_t))
#define PCIC_COUNT ARRAY_SIZE(pcic)
/*====================================================================*/
......@@ -294,7 +294,7 @@ static void i365_set_pair(u_short sock, u_short reg, u_short data)
static void cirrus_get_state(u_short s)
{
int i;
cirrus_state_t *p = &socket[s].state.cirrus;
struct cirrus_state *p = &socket[s].state.cirrus;
p->misc1 = i365_get(s, PD67_MISC_CTL_1);
p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
p->misc2 = i365_get(s, PD67_MISC_CTL_2);
......@@ -306,7 +306,7 @@ static void cirrus_set_state(u_short s)
{
int i;
u_char misc;
cirrus_state_t *p = &socket[s].state.cirrus;
struct cirrus_state *p = &socket[s].state.cirrus;
misc = i365_get(s, PD67_MISC_CTL_2);
i365_set(s, PD67_MISC_CTL_2, p->misc2);
......@@ -321,7 +321,7 @@ static void cirrus_set_state(u_short s)
static u_int __init cirrus_set_opts(u_short s, char *buf)
{
struct i82365_socket *t = &socket[s];
cirrus_state_t *p = &socket[s].state.cirrus;
struct cirrus_state *p = &socket[s].state.cirrus;
u_int mask = 0xffff;
if (has_ring == -1) has_ring = 1;
......@@ -377,7 +377,7 @@ static u_int __init cirrus_set_opts(u_short s, char *buf)
static void vg46x_get_state(u_short s)
{
vg46x_state_t *p = &socket[s].state.vg46x;
struct vg46x_state *p = &socket[s].state.vg46x;
p->ctl = i365_get(s, VG468_CTL);
if (socket[s].type == IS_VG469)
p->ema = i365_get(s, VG469_EXT_MODE);
......@@ -385,7 +385,7 @@ static void vg46x_get_state(u_short s)
static void vg46x_set_state(u_short s)
{
vg46x_state_t *p = &socket[s].state.vg46x;
struct vg46x_state *p = &socket[s].state.vg46x;
i365_set(s, VG468_CTL, p->ctl);
if (socket[s].type == IS_VG469)
i365_set(s, VG469_EXT_MODE, p->ema);
......@@ -393,7 +393,7 @@ static void vg46x_set_state(u_short s)
static u_int __init vg46x_set_opts(u_short s, char *buf)
{
vg46x_state_t *p = &socket[s].state.vg46x;
struct vg46x_state *p = &socket[s].state.vg46x;
flip(p->ctl, VG468_CTL_ASYNC, async_clock);
flip(p->ema, VG469_MODE_CABLE, cable_mode);
......@@ -1285,13 +1285,6 @@ static int __init init_i82365(void)
ret = pcmcia_register_socket(&socket[i].socket);
if (!ret)
socket[i].flags |= IS_REGISTERED;
#if 0 /* driver model ordering issue */
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_info);
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_exca);
#endif
}
/* Finally, schedule a polling interrupt */
......
drivers/pcmcia/m32r_cfc.c
浏览文件 @ a394c6a0
......@@ -754,13 +754,6 @@ static int __init init_m32r_pcc(void)
ret = pcmcia_register_socket(&socket[i].socket);
if (!ret)
socket[i].flags |= IS_REGISTERED;
#if 0 /* driver model ordering issue */
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_info);
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_exca);
#endif
}
/* Finally, schedule a polling interrupt */
......
drivers/pcmcia/m32r_pcc.c
浏览文件 @ a394c6a0
......@@ -716,13 +716,6 @@ static int __init init_m32r_pcc(void)
ret = pcmcia_register_socket(&socket[i].socket);
if (!ret)
socket[i].flags |= IS_REGISTERED;
#if 0 /* driver model ordering issue */
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_info);
class_device_create_file(&socket[i].socket.dev,
&class_device_attr_exca);
#endif
}
/* Finally, schedule a polling interrupt */
......
drivers/pcmcia/pcmcia_cis.c
浏览文件 @ a394c6a0
......@@ -44,7 +44,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
buf = kmalloc(256, GFP_KERNEL);
if (buf == NULL) {
dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
dev_warn(&s->dev, "no memory to read tuple\n");
return -ENOMEM;
}
tuple.DesiredTuple = code;
......@@ -94,7 +94,7 @@ int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
buf = kzalloc(256, GFP_KERNEL);
if (buf == NULL) {
dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
dev_warn(&s->dev, "no memory to read tuple\n");
return -ENOMEM;
}
......
drivers/pcmcia/pcmcia_resource.c
浏览文件 @ a394c6a0
......@@ -508,8 +508,7 @@ int pcmcia_enable_device(struct pcmcia_device *p_dev)
s->socket.Vpp = p_dev->vpp;
if (s->ops->set_socket(s, &s->socket)) {
mutex_unlock(&s->ops_mutex);
dev_printk(KERN_WARNING, &p_dev->dev,
"Unable to set socket state\n");
dev_warn(&p_dev->dev, "Unable to set socket state\n");
return -EINVAL;
}
......@@ -736,13 +735,11 @@ __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv);
if (ret) {
ret = pcmcia_request_irq(p_dev, handler);
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: "
"request for exclusive IRQ could not be fulfilled.\n");
dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver "
"needs updating to supported shared IRQ lines.\n");
dev_warn(&p_dev->dev, "pcmcia: request for exclusive IRQ could not be fulfilled\n");
dev_warn(&p_dev->dev, "pcmcia: the driver needs updating to supported shared IRQ lines\n");
}
if (ret)
dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n");
dev_info(&p_dev->dev, "request_irq() failed\n");
else
p_dev->_irq = 1;
......
drivers/pcmcia/rsrc_nonstatic.c
浏览文件 @ a394c6a0
......@@ -191,15 +191,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
int any;
u_char *b, hole, most;
dev_printk(KERN_INFO, &s->dev, "cs: IO port probe %#x-%#x:",
base, base+num-1);
dev_info(&s->dev, "cs: IO port probe %#x-%#x:", base, base+num-1);
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
printk("\n");
dev_printk(KERN_ERR, &s->dev,
"do_io_probe: unable to kmalloc 256 bytes");
pr_cont("\n");
dev_err(&s->dev, "do_io_probe: unable to kmalloc 256 bytes\n");
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
......@@ -223,7 +221,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
if (!res) {
if (!any)
printk(" excluding");
pr_cont(" excluding");
if (!bad)
bad = any = i;
continue;
......@@ -234,13 +232,13 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
free_region(res);
if (j < 8) {
if (!any)
printk(" excluding");
pr_cont(" excluding");
if (!bad)
bad = any = i;
} else {
if (bad) {
sub_interval(&s_data->io_db, bad, i-bad);
printk(" %#x-%#x", bad, i-1);
pr_cont(" %#x-%#x", bad, i-1);
bad = 0;
}
}
......@@ -248,15 +246,15 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base,
if (bad) {
if ((num > 16) && (bad == base) && (i == base+num)) {
sub_interval(&s_data->io_db, bad, i-bad);
printk(" nothing: probe failed.\n");
pr_cont(" nothing: probe failed.\n");
return;
} else {
sub_interval(&s_data->io_db, bad, i-bad);
printk(" %#x-%#x", bad, i-1);
pr_cont(" %#x-%#x", bad, i-1);
}
}
printk(any ? "\n" : " clean.\n");
pr_cont("%s\n", !any ? " clean" : "");
}
#endif
......@@ -413,8 +411,8 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
struct socket_data *s_data = s->resource_data;
u_long i, j, bad, fail, step;
dev_printk(KERN_INFO, &s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
base, base+num-1);
dev_info(&s->dev, "cs: memory probe 0x%06lx-0x%06lx:",
base, base+num-1);
bad = fail = 0;
step = (num < 0x20000) ? 0x2000 : ((num>>4) & ~0x1fff);
/* don't allow too large steps */
......@@ -438,13 +436,13 @@ static int do_mem_probe(struct pcmcia_socket *s, u_long base, u_long num,
}
if (i != j) {
if (!bad)
printk(" excluding");
printk(" %#05lx-%#05lx", i, j-1);
pr_cont(" excluding");
pr_cont(" %#05lx-%#05lx", i, j-1);
sub_interval(&s_data->mem_db, i, j-i);
bad += j-i;
}
}
printk(bad ? "\n" : " clean.\n");
pr_cont("%s\n", !bad ? " clean" : "");
return num - bad;
}
......@@ -495,7 +493,7 @@ static int validate_mem(struct pcmcia_socket *s, unsigned int probe_mask)
return 0;
if (s_data->mem_db_valid.next != &s_data->mem_db_valid)
return 0;
dev_printk(KERN_NOTICE, &s->dev,
dev_notice(&s->dev,
"cs: warning: no high memory space available!\n");
return -ENODEV;
}
......@@ -975,9 +973,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
if (res == &ioport_resource)
continue;
dev_printk(KERN_INFO, &s->cb_dev->dev,
"pcmcia: parent PCI bridge window: %pR\n",
res);
dev_info(&s->cb_dev->dev,
"pcmcia: parent PCI bridge window: %pR\n",
res);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
......@@ -990,9 +988,9 @@ static int nonstatic_autoadd_resources(struct pcmcia_socket *s)
if (res == &iomem_resource)
continue;
dev_printk(KERN_INFO, &s->cb_dev->dev,
"pcmcia: parent PCI bridge window: %pR\n",
res);
dev_info(&s->cb_dev->dev,
"pcmcia: parent PCI bridge window: %pR\n",
res);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}
......
drivers/pcmcia/ti113x.h
浏览文件 @ a394c6a0
......@@ -372,8 +372,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
mfunc, devctl);
/* make sure PCI interrupts are enabled before probing */
ti_init(socket);
......@@ -387,8 +387,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting (all serial or parallel)
*/
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: probing PCI interrupt failed, trying to fix\n");
dev_info(&socket->dev->dev,
"TI: probing PCI interrupt failed, trying to fix\n");
/* for serial PCI make sure MFUNC3 is set to IRQSER */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
......@@ -412,8 +412,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: all-serial interrupts ok\n");
dev_info(&socket->dev->dev,
"TI: all-serial interrupts ok\n");
mfunc_old = mfunc;
goto out;
}
......@@ -428,8 +428,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
}
/* serial PCI interrupts not working fall back to parallel */
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: falling back to parallel PCI interrupts\n");
dev_info(&socket->dev->dev,
"TI: falling back to parallel PCI interrupts\n");
devctl &= ~TI113X_DCR_IMODE_MASK;
devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
......@@ -460,8 +460,7 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
mfunc_old = mfunc;
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: parallel PCI interrupts ok\n");
dev_info(&socket->dev->dev, "TI: parallel PCI interrupts ok\n");
} else {
/* not working, back to old value */
mfunc = mfunc_old;
......@@ -473,9 +472,8 @@ static void ti12xx_irqroute_func0(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
dev_printk(KERN_INFO, &socket->dev->dev,
"Yenta TI: no PCI interrupts. Fish. "
"Please report.\n");
dev_info(&socket->dev->dev,
"Yenta TI: no PCI interrupts. Fish. Please report.\n");
}
}
......@@ -547,9 +545,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: mfunc 0x%08x, devctl 0x%02x\n",
mfunc, devctl);
dev_info(&socket->dev->dev, "TI: mfunc 0x%08x, devctl 0x%02x\n",
mfunc, devctl);
/* if IRQs are configured as tied, align irq of func1 with func0 */
sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
......@@ -568,8 +565,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
* We're here which means PCI interrupts are _not_ delivered. try to
* find the right setting
*/
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: probing PCI interrupt failed, trying to fix\n");
dev_info(&socket->dev->dev,
"TI: probing PCI interrupt failed, trying to fix\n");
/* if all serial: set INTRTIE, probe again */
if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
......@@ -578,8 +575,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: all-serial interrupts, tied ok\n");
dev_info(&socket->dev->dev,
"TI: all-serial interrupts, tied ok\n");
goto out;
}
......@@ -616,8 +613,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: parallel PCI interrupts ok\n");
dev_info(&socket->dev->dev,
"TI: parallel PCI interrupts ok\n");
goto out;
}
......@@ -632,8 +629,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
if (ti12xx_tie_interrupts(socket, &old_irq)) {
pci_irq_status = yenta_probe_cb_irq(socket);
if (pci_irq_status == 1) {
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: parallel PCI interrupts, tied ok\n");
dev_info(&socket->dev->dev,
"TI: parallel PCI interrupts, tied ok\n");
goto out;
}
......@@ -644,8 +641,8 @@ static void ti12xx_irqroute_func1(struct yenta_socket *socket)
out:
if (pci_irq_status < 1) {
socket->cb_irq = 0;
dev_printk(KERN_INFO, &socket->dev->dev,
"TI: no PCI interrupts. Fish. Please report.\n");
dev_info(&socket->dev->dev,
"TI: no PCI interrupts. Fish. Please report.\n");
}
}
......@@ -849,13 +846,12 @@ static int ti12xx_override(struct yenta_socket *socket)
/* make sure that memory burst is active */
val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
dev_printk(KERN_INFO, &socket->dev->dev,
"Disabling CLKRUN feature\n");
dev_info(&socket->dev->dev, "Disabling CLKRUN feature\n");
val |= TI113X_SCR_KEEPCLK;
}
if (!(val & TI122X_SCR_MRBURSTUP)) {
dev_printk(KERN_INFO, &socket->dev->dev,
"Enabling burst memory read transactions\n");
dev_info(&socket->dev->dev,
"Enabling burst memory read transactions\n");
val |= TI122X_SCR_MRBURSTUP;
}
if (val_orig != val)
......@@ -866,12 +862,10 @@ static int ti12xx_override(struct yenta_socket *socket)
* CSC interrupts to PCI rather than INTVAL.
*/
val = config_readb(socket, TI1250_DIAGNOSTIC);
dev_printk(KERN_INFO, &socket->dev->dev,
"Using %s to route CSC interrupts to PCI\n",
(val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
dev_printk(KERN_INFO, &socket->dev->dev,
"Routing CardBus interrupts to %s\n",
(val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
dev_info(&socket->dev->dev, "Using %s to route CSC interrupts to PCI\n",
(val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
dev_info(&socket->dev->dev, "Routing CardBus interrupts to %s\n",
(val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
/* do irqrouting, depending on function */
if (PCI_FUNC(socket->dev->devfn) == 0)
......@@ -896,9 +890,9 @@ static int ti1250_override(struct yenta_socket *socket)
diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
if (diag != old) {
dev_printk(KERN_INFO, &socket->dev->dev,
"adjusting diagnostic: %02x -> %02x\n",
old, diag);
dev_info(&socket->dev->dev,
"adjusting diagnostic: %02x -> %02x\n",
old, diag);
config_writeb(socket, TI1250_DIAGNOSTIC, diag);
}
......@@ -963,9 +957,9 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
/* default to clear TLTEnable bit, old behaviour */
test_c9 &= ~ENE_TEST_C9_TLTENABLE;
dev_printk(KERN_INFO, &socket->dev->dev,
"EnE: chaning testregister 0xC9, %02x -> %02x\n",
old_c9, test_c9);
dev_info(&socket->dev->dev,
"EnE: changing testregister 0xC9, %02x -> %02x\n",
old_c9, test_c9);
config_writeb(socket, ENE_TEST_C9, test_c9);
}
......
drivers/pcmcia/topic.h
浏览文件 @ a394c6a0
......@@ -104,6 +104,9 @@
#define TOPIC_EXCA_IF_CONTROL 0x3e /* 8 bit */
#define TOPIC_EXCA_IFC_33V_ENA 0x01
#define TOPIC_PCI_CFG_PPBCN 0x3e /* 16-bit */
#define TOPIC_PCI_CFG_PPBCN_WBEN 0x0400
static void topic97_zoom_video(struct pcmcia_socket *sock, int onoff)
{
struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
......@@ -138,6 +141,7 @@ static int topic97_override(struct yenta_socket *socket)
static int topic95_override(struct yenta_socket *socket)
{
u8 fctrl;
u16 ppbcn;
/* enable 3.3V support for 16bit cards */
fctrl = exca_readb(socket, TOPIC_EXCA_IF_CONTROL);
......@@ -146,6 +150,18 @@ static int topic95_override(struct yenta_socket *socket)
/* tell yenta to use exca registers to power 16bit cards */
socket->flags |= YENTA_16BIT_POWER_EXCA | YENTA_16BIT_POWER_DF;
/* Disable write buffers to prevent lockups under load with numerous
Cardbus cards, observed on Tecra 500CDT and reported elsewhere on the
net. This is not a power-on default according to the datasheet
but some BIOSes seem to set it. */
if (pci_read_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, &ppbcn) == 0
&& socket->dev->revision <= 7
&& (ppbcn & TOPIC_PCI_CFG_PPBCN_WBEN)) {
ppbcn &= ~TOPIC_PCI_CFG_PPBCN_WBEN;
pci_write_config_word(socket->dev, TOPIC_PCI_CFG_PPBCN, ppbcn);
dev_info(&socket->dev->dev, "Disabled ToPIC95 Cardbus write buffers.\n");
}
return 0;
}
......
drivers/pcmcia/vrc4171_card.c
浏览文件 @ a394c6a0
......@@ -84,32 +84,32 @@ MODULE_LICENSE("GPL");
#define IO_MAX_MAPS 2
#define MEM_MAX_MAPS 5
typedef enum {
enum vrc4171_slot {
SLOT_PROBE = 0,
SLOT_NOPROBE_IO,
SLOT_NOPROBE_MEM,
SLOT_NOPROBE_ALL,
SLOT_INITIALIZED,
} vrc4171_slot_t;
};
typedef enum {
enum vrc4171_slotb {
SLOTB_IS_NONE,
SLOTB_IS_PCCARD,
SLOTB_IS_CF,
SLOTB_IS_FLASHROM,
} vrc4171_slotb_t;
};
typedef struct vrc4171_socket {
vrc4171_slot_t slot;
struct vrc4171_socket {
enum vrc4171_slot slot;
struct pcmcia_socket pcmcia_socket;
char name[24];
int csc_irq;
int io_irq;
spinlock_t lock;
} vrc4171_socket_t;
};
static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
static vrc4171_slotb_t vrc4171_slotb = SLOTB_IS_NONE;
static struct vrc4171_socket vrc4171_sockets[CARD_MAX_SLOTS];
static enum vrc4171_slotb vrc4171_slotb = SLOTB_IS_NONE;
static char vrc4171_card_name[] = "NEC VRC4171 Card Controller";
static unsigned int vrc4171_irq;
static uint16_t vrc4171_irq_mask = 0xdeb8;
......@@ -141,7 +141,7 @@ static inline uint16_t vrc4171_get_irq_status(void)
return inw(INTERRUPT_STATUS);
}
static inline void vrc4171_set_multifunction_pin(vrc4171_slotb_t config)
static inline void vrc4171_set_multifunction_pin(enum vrc4171_slotb config)
{
uint16_t config1;
......@@ -234,7 +234,7 @@ static inline int search_nonuse_irq(void)
static int pccard_init(struct pcmcia_socket *sock)
{
vrc4171_socket_t *socket;
struct vrc4171_socket *socket;
unsigned int slot;
sock->features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
......@@ -317,7 +317,7 @@ static inline uint8_t set_Vcc_value(u_char Vcc)
static int pccard_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
{
vrc4171_socket_t *socket;
struct vrc4171_socket *socket;
unsigned int slot;
uint8_t voltage, power, control, cscint;
......@@ -517,7 +517,7 @@ static inline unsigned int get_events(int slot)
static irqreturn_t pccard_interrupt(int irq, void *dev_id)
{
vrc4171_socket_t *socket;
struct vrc4171_socket *socket;
unsigned int events;
irqreturn_t retval = IRQ_NONE;
uint16_t status;
......@@ -567,7 +567,7 @@ static inline void reserve_using_irq(int slot)
static int vrc4171_add_sockets(void)
{
vrc4171_socket_t *socket;
struct vrc4171_socket *socket;
int slot, retval;
for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
......@@ -617,7 +617,7 @@ static int vrc4171_add_sockets(void)
static void vrc4171_remove_sockets(void)
{
vrc4171_socket_t *socket;
struct vrc4171_socket *socket;
int slot;
for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
......
drivers/pcmcia/yenta_socket.c
浏览文件 @ a394c6a0
......@@ -712,10 +712,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
pcibios_bus_to_resource(dev->bus, res, &region);
if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0)
return 0;
dev_printk(KERN_INFO, &dev->dev,
"Preassigned resource %d busy or not available, "
"reconfiguring...\n",
nr);
dev_info(&dev->dev,
"Preassigned resource %d busy or not available, reconfiguring...\n",
nr);
}
if (type & IORESOURCE_IO) {
......@@ -738,9 +737,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type
return 1;
}
dev_printk(KERN_INFO, &dev->dev,
"no resource of type %x available, trying to continue...\n",
type);
dev_info(&dev->dev,
"no resource of type %x available, trying to continue...\n",
type);
res->start = res->end = res->flags = 0;
return 0;
}
......@@ -802,13 +801,13 @@ static void yenta_close(struct pci_dev *dev)
else
del_timer_sync(&sock->poll_timer);
if (sock->base)
iounmap(sock->base);
iounmap(sock->base);
yenta_free_resources(sock);
pci_release_regions(dev);
pci_disable_device(dev);
pci_set_drvdata(dev, NULL);
kfree(sock);
}
......@@ -979,8 +978,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket)
socket->probe_status = 0;
if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) {
dev_printk(KERN_WARNING, &socket->dev->dev,
"request_irq() in yenta_probe_cb_irq() failed!\n");
dev_warn(&socket->dev->dev,
"request_irq() in yenta_probe_cb_irq() failed!\n");
return -1;
}
......@@ -1019,9 +1018,8 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i
else
socket->socket.irq_mask = 0;
dev_printk(KERN_INFO, &socket->dev->dev,
"ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
socket->socket.irq_mask, socket->cb_irq);
}
/*
......@@ -1111,9 +1109,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
/* Show that the wanted subordinate number is not possible: */
if (cardbus_bridge->busn_res.end > upper_limit)
dev_printk(KERN_WARNING, &cardbus_bridge->dev,
"Upper limit for fixing this "
"bridge's parent bridge: #%02x\n", upper_limit);
dev_warn(&cardbus_bridge->dev,
"Upper limit for fixing this bridge's parent bridge: #%02x\n",
upper_limit);
/* If we have room to increase the bridge's subordinate number, */
if (bridge_to_fix->busn_res.end < upper_limit) {
......@@ -1122,11 +1120,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
unsigned char subordinate_to_assign =
min_t(int, cardbus_bridge->busn_res.end, upper_limit);
dev_printk(KERN_INFO, &bridge_to_fix->dev,
"Raising subordinate bus# of parent "
"bus (#%02x) from #%02x to #%02x\n",
bridge_to_fix->number,
(int)bridge_to_fix->busn_res.end, subordinate_to_assign);
dev_info(&bridge_to_fix->dev,
"Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n",
bridge_to_fix->number,
(int)bridge_to_fix->busn_res.end,
subordinate_to_assign);
/* Save the new subordinate in the bus struct of the bridge */
bridge_to_fix->busn_res.end = subordinate_to_assign;
......@@ -1153,8 +1151,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
* Bail out if so.
*/
if (!dev->subordinate) {
dev_printk(KERN_ERR, &dev->dev, "no bus associated! "
"(try 'pci=assign-busses')\n");
dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n");
return -ENODEV;
}
......@@ -1189,7 +1186,7 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto disable;
if (!pci_resource_start(dev, 0)) {
dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n");
dev_err(&dev->dev, "No cardbus resource!\n");
ret = -ENODEV;
goto release;
}
......@@ -1208,8 +1205,8 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
* report the subsystem vendor and device for help debugging
* the irq stuff...
*/
dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n",
dev->subsystem_vendor, dev->subsystem_device);
dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n",
dev->subsystem_vendor, dev->subsystem_device);
yenta_config_init(socket);
......@@ -1239,12 +1236,10 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
setup_timer(&socket->poll_timer, yenta_interrupt_wrapper,
(unsigned long)socket);
mod_timer(&socket->poll_timer, jiffies + HZ);
dev_printk(KERN_INFO, &dev->dev,
"no PCI IRQ, CardBus support disabled for this "
"socket.\n");
dev_printk(KERN_INFO, &dev->dev,
"check your BIOS CardBus, BIOS IRQ or ACPI "
"settings.\n");
dev_info(&dev->dev,
"no PCI IRQ, CardBus support disabled for this socket.\n");
dev_info(&dev->dev,
"check your BIOS CardBus, BIOS IRQ or ACPI settings.\n");
} else {
socket->socket.features |= SS_CAP_CARDBUS;
}
......@@ -1252,32 +1247,41 @@ static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Figure out what the dang thing can do for the PCMCIA layer... */
yenta_interrogate(socket);
yenta_get_socket_capabilities(socket, isa_interrupts);
dev_printk(KERN_INFO, &dev->dev,
"Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
dev_info(&dev->dev, "Socket status: %08x\n",
cb_readl(socket, CB_SOCKET_STATE));
yenta_fixup_parent_bridge(dev->subordinate);
/* Register it with the pcmcia layer.. */
ret = pcmcia_register_socket(&socket->socket);
if (ret == 0) {
/* Add the yenta register attributes */
ret = device_create_file(&dev->dev, &dev_attr_yenta_registers);
if (ret == 0)
goto out;
/* error path... */
pcmcia_unregister_socket(&socket->socket);
}
if (ret)
goto free_irq;
/* Add the yenta register attributes */
ret = device_create_file(&dev->dev, &dev_attr_yenta_registers);
if (ret)
goto unregister_socket;
return ret;
/* error path... */
unregister_socket:
pcmcia_unregister_socket(&socket->socket);
free_irq:
if (socket->cb_irq)
free_irq(socket->cb_irq, socket);
else
del_timer_sync(&socket->poll_timer);
unmap:
iounmap(socket->base);
yenta_free_resources(socket);
release:
pci_release_regions(dev);
disable:
pci_disable_device(dev);
free:
pci_set_drvdata(dev, NULL);
kfree(socket);
out:
return ret;
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或