提交 a361d84b 编写于 作者: K Kailang Yang 提交者: Jaroslav Kysela

[ALSA] hda-codec - Add support of ALC268 codec

Added the support of new ALC268 codec chip.
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 7d87de2d
......@@ -822,6 +822,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)
ALC268
3stack 3-stack model
auto auto-config reading BIOS (default)
ALC882/885
3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack digital with SPDIF I/O
......
......@@ -98,6 +98,13 @@ enum {
ALC262_MODEL_LAST /* last tag */
};
/* ALC268 models */
enum {
ALC268_3ST,
ALC268_AUTO,
ALC268_MODEL_LAST /* last tag */
};
/* ALC861 models */
enum {
ALC861_3ST,
......@@ -7803,6 +7810,515 @@ static int patch_alc262(struct hda_codec *codec)
return 0;
}
/*
* ALC268 channel source setting (2 channel)
*/
#define ALC268_DIGOUT_NID ALC880_DIGOUT_NID
#define alc268_modes alc260_modes
static hda_nid_t alc268_dac_nids[2] = {
/* front, hp */
0x02, 0x03
};
static hda_nid_t alc268_adc_nids[2] = {
/* ADC0-1 */
0x08, 0x07
};
static hda_nid_t alc268_adc_nids_alt[1] = {
/* ADC0 */
0x08
};
static struct snd_kcontrol_new alc268_base_mixer[] = {
/* output mixer control */
HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
{ }
};
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc268_base_init_verbs[] = {
/* Unmute DAC0-1 and set vol = 0 */
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/*
* Set up output mixers (0x0c - 0x0e)
*/
/* set vol=0 to output mixers */
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
/* FIXME: use matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1c, 14, 15, 0b */
/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
/* Input mixer2 */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
{ }
};
/*
* generic initialization of ADC, input mixers and output mixers
*/
static struct hda_verb alc268_volume_init_verbs[] = {
/* set output DAC */
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* set PCBEEP vol = 0 */
{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0xb000 | (0x00 << 8))},
{ }
};
#define alc268_mux_enum_info alc_mux_enum_info
#define alc268_mux_enum_get alc_mux_enum_get
static int alc268_mux_enum_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
const struct hda_input_mux *imux = spec->input_mux;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
static hda_nid_t capture_mixers[3] = { 0x23, 0x24 };
hda_nid_t nid = capture_mixers[adc_idx];
unsigned int *cur_val = &spec->cur_mux[adc_idx];
unsigned int i, idx;
idx = ucontrol->value.enumerated.item[0];
if (idx >= imux->num_items)
idx = imux->num_items - 1;
if (*cur_val == idx && !codec->in_resume)
return 0;
for (i = 0; i < imux->num_items; i++) {
unsigned int v = (i == idx) ? 0x7000 : 0x7080;
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
v | (imux->items[i].index << 8));
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL,
idx );
}
*cur_val = idx;
return 1;
}
static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
.info = alc268_mux_enum_info,
.get = alc268_mux_enum_get,
.put = alc268_mux_enum_put,
},
{ } /* end */
};
static struct snd_kcontrol_new alc268_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* The multiple "Capture Source" controls confuse alsamixer
* So call somewhat different..
* FIXME: the controls appear in the "playback" view!
*/
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
.info = alc268_mux_enum_info,
.get = alc268_mux_enum_get,
.put = alc268_mux_enum_put,
},
{ } /* end */
};
static struct hda_input_mux alc268_capture_source = {
.num_items = 4,
.items = {
{ "Mic", 0x0 },
{ "Front Mic", 0x1 },
{ "Line", 0x2 },
{ "CD", 0x3 },
},
};
/* create input playback/capture controls for the given pin */
static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
const char *ctlname, int idx)
{
char name[32];
int err;
sprintf(name, "%s Playback Volume", ctlname);
if (nid == 0x14) {
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(0x02, 3, idx,
HDA_OUTPUT));
if (err < 0)
return err;
} else if (nid == 0x15) {
err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
HDA_COMPOSE_AMP_VAL(0x03, 3, idx,
HDA_OUTPUT));
if (err < 0)
return err;
} else
return -1;
sprintf(name, "%s Playback Switch", ctlname);
err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
if (err < 0)
return err;
return 0;
}
/* add playback controls from the parsed DAC table */
static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
hda_nid_t nid;
int err;
spec->multiout.num_dacs = 2; /* only use one dac */
spec->multiout.dac_nids = spec->private_dac_nids;
spec->multiout.dac_nids[0] = 2;
spec->multiout.dac_nids[1] = 3;
nid = cfg->line_out_pins[0];
if (nid)
alc268_new_analog_output(spec, nid, "Front", 0);
nid = cfg->speaker_pins[0];
if (nid == 0x1d) {
err = add_control(spec, ALC_CTL_WIDGET_VOL,
"Speaker Playback Volume",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
}
nid = cfg->hp_pins[0];
if (nid)
alc268_new_analog_output(spec, nid, "Headphone", 0);
nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
if (nid == 0x16) {
err = add_control(spec, ALC_CTL_WIDGET_MUTE,
"Mono Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_INPUT));
if (err < 0)
return err;
}
return 0;
}
/* create playback/capture controls for input pins */
static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
const struct auto_pin_cfg *cfg)
{
struct hda_input_mux *imux = &spec->private_imux;
int i, idx1;
for (i = 0; i < AUTO_PIN_LAST; i++) {
switch(cfg->input_pins[i]) {
case 0x18:
idx1 = 0; /* Mic 1 */
break;
case 0x19:
idx1 = 1; /* Mic 2 */
break;
case 0x1a:
idx1 = 2; /* Line In */
break;
case 0x1c:
idx1 = 3; /* CD */
break;
default:
continue;
}
imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
imux->items[imux->num_items].index = idx1;
imux->num_items++;
}
return 0;
}
static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
unsigned int dac_vol1, dac_vol2;
if (speaker_nid) {
snd_hda_codec_write(codec, speaker_nid, 0,
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
snd_hda_codec_write(codec, 0x10, 0,
AC_VERB_SET_AMP_GAIN_MUTE,
AMP_IN_UNMUTE(1));
} else {
snd_hda_codec_write(codec, 0x0f, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
snd_hda_codec_write(codec, 0x10, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
}
dac_vol1 = dac_vol2 = 0xb000 | 0x40; /* set max volume */
if (line_nid == 0x14)
dac_vol2 = AMP_OUT_ZERO;
else if (line_nid == 0x15)
dac_vol1 = AMP_OUT_ZERO;
if (hp_nid == 0x14)
dac_vol2 = AMP_OUT_ZERO;
else if (hp_nid == 0x15)
dac_vol1 = AMP_OUT_ZERO;
if (line_nid != 0x16 || hp_nid != 0x16 ||
spec->autocfg.line_out_pins[1] != 0x16 ||
spec->autocfg.line_out_pins[2] != 0x16)
dac_vol1 = dac_vol2 = AMP_OUT_ZERO;
snd_hda_codec_write(codec, 0x02, 0,
AC_VERB_SET_AMP_GAIN_MUTE, dac_vol1);
snd_hda_codec_write(codec, 0x03, 0,
AC_VERB_SET_AMP_GAIN_MUTE, dac_vol2);
}
/* pcm configuration: identiacal with ALC880 */
#define alc268_pcm_analog_playback alc880_pcm_analog_playback
#define alc268_pcm_analog_capture alc880_pcm_analog_capture
#define alc268_pcm_digital_playback alc880_pcm_digital_playback
/*
* BIOS auto configuration
*/
static int alc268_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
int err;
static hda_nid_t alc268_ignore[] = { 0 };
err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc268_ignore);
if (err < 0)
return err;
if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
err = alc268_auto_create_analog_input_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
spec->multiout.max_channels = 2;
/* digital only support output */
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
spec->init_verbs[spec->num_init_verbs++] = alc268_volume_init_verbs;
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
return 1;
}
#define alc268_auto_init_multi_out alc882_auto_init_multi_out
#define alc268_auto_init_hp_out alc882_auto_init_hp_out
#define alc268_auto_init_analog_input alc882_auto_init_analog_input
/* init callback for auto-configuration model -- overriding the default init */
static void alc268_auto_init(struct hda_codec *codec)
{
alc268_auto_init_multi_out(codec);
alc268_auto_init_hp_out(codec);
alc268_auto_init_mono_speaker_out(codec);
alc268_auto_init_analog_input(codec);
}
/*
* configuration and preset
*/
static const char *alc268_models[ALC268_MODEL_LAST] = {
[ALC268_3ST] = "3stack",
[ALC268_AUTO] = "auto",
};
static struct snd_pci_quirk alc268_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
{}
};
static struct alc_config_preset alc268_presets[] = {
[ALC268_3ST] = {
.mixers = { alc268_base_mixer, alc268_capture_alt_mixer },
.init_verbs = { alc268_base_init_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
.adc_nids = alc268_adc_nids_alt,
.hp_nid = 0x03,
.dig_out_nid = ALC268_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
},
};
static int patch_alc268(struct hda_codec *codec)
{
struct alc_spec *spec;
int board_config;
int err;
spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
return -ENOMEM;
codec->spec = spec;
board_config = snd_hda_check_board_config(codec, ALC268_MODEL_LAST,
alc268_models,
alc268_cfg_tbl);
if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
"trying auto-probe from BIOS...\n");
board_config = ALC268_AUTO;
}
if (board_config == ALC268_AUTO) {
/* automatic parse from the BIOS config */
err = alc268_parse_auto_config(codec);
if (err < 0) {
alc_free(codec);
return err;
} else if (!err) {
printk(KERN_INFO
"hda_codec: Cannot set up configuration "
"from BIOS. Using base mode...\n");
board_config = ALC268_3ST;
}
}
if (board_config != ALC268_AUTO)
setup_preset(spec, &alc268_presets[board_config]);
spec->stream_name_analog = "ALC268 Analog";
spec->stream_analog_playback = &alc268_pcm_analog_playback;
spec->stream_analog_capture = &alc268_pcm_analog_capture;
spec->stream_name_digital = "ALC268 Digital";
spec->stream_digital_playback = &alc268_pcm_digital_playback;
if (board_config == ALC268_AUTO) {
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
/* get type */
wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc268_adc_nids_alt;
spec->num_adc_nids =
ARRAY_SIZE(alc268_adc_nids_alt);
spec->mixers[spec->num_mixers] =
alc268_capture_alt_mixer;
spec->num_mixers++;
} else {
spec->adc_nids = alc268_adc_nids;
spec->num_adc_nids =
ARRAY_SIZE(alc268_adc_nids);
spec->mixers[spec->num_mixers] =
alc268_capture_mixer;
spec->num_mixers++;
}
}
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC268_AUTO)
spec->init_hook = alc268_auto_init;
return 0;
}
/*
* ALC861 channel source setting (2/6 channel selection for 3-stack)
*/
......@@ -10728,6 +11244,7 @@ static int patch_alc662(struct hda_codec *codec)
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0268, .name = "ALC268", .patch = patch_alc268 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册