3c501: Bring into compliance with the coding style

3c501 leads the way... 8)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/net/3c501.c

@@ -17,7 +17,7 @@
 	Annapolis MD 21403
 
     Fixed (again!) the missing interrupt locking on TX/RX shifting.
-    		Alan Cox <Alan.Cox@linux.org>
+	Alan Cox <Alan.Cox@linux.org>
 
     Removed calls to init_etherdev since they are no longer needed, and
     cleaned up modularization just a bit. The driver still allows only
@@ -29,16 +29,16 @@
     the board. Now getting 150K/second FTP with a 3c501 card. Still playing
     with a TX-TX optimisation to see if we can touch 180-200K/second as seems
     theoretically maximum.
-    		19950402 Alan Cox <Alan.Cox@linux.org>
+		19950402 Alan Cox <Alan.Cox@linux.org>
 
     Cleaned up for 2.3.x because we broke SMP now.
-    		20000208 Alan Cox <alan@redhat.com>
+		20000208 Alan Cox <alan@redhat.com>
 
     Check up pass for 2.5. Nothing significant changed
-    		20021009 Alan Cox <alan@redhat.com>
+		20021009 Alan Cox <alan@redhat.com>
 
     Fixed zero fill corner case
-    		20030104 Alan Cox <alan@redhat.com>
+		20030104 Alan Cox <alan@redhat.com>
 
 
    For the avoidance of doubt the "preferred form" of this code is one which
@@ -139,8 +139,8 @@ static const char version[] =
  *	The boilerplate probe code.
  */
 
-static int io=0x280;
-static int irq=5;
+static int io = 0x280;
+static int irq = 5;
 static int mem_start;
 
 /**
@@ -229,8 +229,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	 *	Read the station address PROM data from the special port.
 	 */
 
-	for (i = 0; i < 6; i++)
-	{
+	for (i = 0; i < 6; i++) {
 		outw(i, ioaddr + EL1_DATAPTR);
 		station_addr[i] = inb(ioaddr + EL1_SAPROM);
 	}
@@ -240,28 +239,24 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	 */
 
 	if (station_addr[0] == 0x02  &&  station_addr[1] == 0x60
-		&& station_addr[2] == 0x8c)
-	{
+						&& station_addr[2] == 0x8c)
 		mname = "3c501";
-	} else if (station_addr[0] == 0x00  &&  station_addr[1] == 0x80
-	&& station_addr[2] == 0xC8)
-	{
+	else if (station_addr[0] == 0x00  &&  station_addr[1] == 0x80
+						&& station_addr[2] == 0xC8)
 		mname = "NP943";
-    	}
-    	else {
+	else {
 		release_region(ioaddr, EL1_IO_EXTENT);
 		return -ENODEV;
 	}
 
 	/*
-	 *	We auto-IRQ by shutting off the interrupt line and letting it float
-	 *	high.
+	 *	We auto-IRQ by shutting off the interrupt line and letting it
+	 *	float high.
 	 */
 
 	dev->irq = irq;
 
-	if (dev->irq < 2)
-	{
+	if (dev->irq < 2) {
 		unsigned long irq_mask;
 
 		irq_mask = probe_irq_on();
@@ -274,8 +269,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 		mdelay(20);
 		autoirq = probe_irq_off(irq_mask);
 
-		if (autoirq == 0)
-		{
+		if (autoirq == 0) {
 			printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",
 				mname, ioaddr);
 			release_region(ioaddr, EL1_IO_EXTENT);
@@ -292,7 +286,8 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr)
 	if (autoirq)
 		dev->irq = autoirq;
 
-	printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr,
+	printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
+			dev->name, mname, dev->base_addr,
 			autoirq ? "auto":"assigned ", dev->irq);
 
 #ifdef CONFIG_IP_MULTICAST
@@ -343,7 +338,8 @@ static int el_open(struct net_device *dev)
 	if (el_debug > 2)
 		printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);
 
-	if ((retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev)))
+	retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
+	if (retval)
 		return retval;
 
 	spin_lock_irqsave(&lp->lock, flags);
@@ -371,8 +367,9 @@ static void el_timeout(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug)
-		printk (KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
-			dev->name, inb(TX_STATUS), inb(AX_STATUS), inb(RX_STATUS));
+		printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
+			dev->name, inb(TX_STATUS),
+			inb(AX_STATUS), inb(RX_STATUS));
 	dev->stats.tx_errors++;
 	outb(TX_NORM, TX_CMD);
 	outb(RX_NORM, RX_CMD);
@@ -425,8 +422,7 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	do
-	{
+	do {
 		int len = skb->len;
 		int pad = 0;
 		int gp_start;
@@ -435,10 +431,10 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (len < ETH_ZLEN)
 			pad = ETH_ZLEN - len;
 
-		gp_start = 0x800 - ( len + pad );
+		gp_start = 0x800 - (len + pad);
 
 		lp->tx_pkt_start = gp_start;
-    		lp->collisions = 0;
+		lp->collisions = 0;
 
 		dev->stats.tx_bytes += skb->len;
 
@@ -455,37 +451,42 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		lp->txing = 1;
 
 		/*
-		 *	Turn interrupts back on while we spend a pleasant afternoon
-		 *	loading bytes into the board
+		 *	Turn interrupts back on while we spend a pleasant
+		 *	afternoon loading bytes into the board
 		 */
 
 		spin_unlock_irqrestore(&lp->lock, flags);
 
-		outw(0x00, RX_BUF_CLR);		/* Set rx packet area to 0. */
-		outw(gp_start, GP_LOW);		/* aim - packet will be loaded into buffer start */
-		outsb(DATAPORT,buf,len);	/* load buffer (usual thing each byte increments the pointer) */
+		/* Set rx packet area to 0. */
+		outw(0x00, RX_BUF_CLR);
+		/* aim - packet will be loaded into buffer start */
+		outw(gp_start, GP_LOW);
+		/* load buffer (usual thing each byte increments the pointer) */
+		outsb(DATAPORT, buf, len);
 		if (pad) {
-			while(pad--)		/* Zero fill buffer tail */
+			while (pad--)		/* Zero fill buffer tail */
 				outb(0, DATAPORT);
 		}
-		outw(gp_start, GP_LOW);		/* the board reuses the same register */
+		/* the board reuses the same register */
+		outw(gp_start, GP_LOW);
 
-		if(lp->loading != 2)
-		{
-			outb(AX_XMIT, AX_CMD);		/* fire ... Trigger xmit.  */
-			lp->loading=0;
+		if (lp->loading != 2) {
+			/* fire ... Trigger xmit.  */
+			outb(AX_XMIT, AX_CMD);
+			lp->loading = 0;
 			dev->trans_start = jiffies;
 			if (el_debug > 2)
 				printk(KERN_DEBUG " queued xmit.\n");
-			dev_kfree_skb (skb);
+			dev_kfree_skb(skb);
 			return 0;
 		}
 		/* A receive upset our load, despite our best efforts */
-		if(el_debug>2)
-			printk(KERN_DEBUG "%s: burped during tx load.\n", dev->name);
+		if (el_debug > 2)
+			printk(KERN_DEBUG "%s: burped during tx load.\n",
+				dev->name);
 		spin_lock_irqsave(&lp->lock, flags);
 	}
-	while(1);
+	while (1);
 
 }
 
@@ -534,64 +535,59 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 	 */
 
 	if (el_debug > 3)
-		printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x", dev->name, axsr);
-
-        if(lp->loading==1 && !lp->txing)
-        	printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
-        		dev->name);
-
-	if (lp->txing)
-	{
+		printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",
+							dev->name, axsr);
 
-    		/*
-    		 *	Board in transmit mode. May be loading. If we are
-    		 *	loading we shouldn't have got this.
-    		 */
+	if (lp->loading == 1 && !lp->txing)
+		printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
+			dev->name);
 
+	if (lp->txing) {
+		/*
+		 *	Board in transmit mode. May be loading. If we are
+		 *	loading we shouldn't have got this.
+		 */
 		int txsr = inb(TX_STATUS);
 
-		if(lp->loading==1)
-		{
-			if(el_debug > 2)
-			{
-				printk(KERN_DEBUG "%s: Interrupt while loading [", dev->name);
-				printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x]\n", txsr, inw(GP_LOW),inw(RX_LOW));
+		if (lp->loading == 1) {
+			if (el_debug > 2) {
+				printk(KERN_DEBUG "%s: Interrupt while loading [",
+					dev->name);
+				printk(" txsr=%02x gp=%04x rp=%04x]\n",
+					txsr, inw(GP_LOW), inw(RX_LOW));
 			}
-			lp->loading=2;		/* Force a reload */
+			/* Force a reload */
+			lp->loading = 2;
 			spin_unlock(&lp->lock);
 			goto out;
 		}
-
 		if (el_debug > 6)
-			printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x", txsr, inw(GP_LOW),inw(RX_LOW));
+			printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",
+					txsr, inw(GP_LOW), inw(RX_LOW));
 
-		if ((axsr & 0x80) && (txsr & TX_READY) == 0)
-		{
+		if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
 			/*
-			 *	FIXME: is there a logic to whether to keep on trying or
-			 *	reset immediately ?
+			 *	FIXME: is there a logic to whether to keep
+			 *	on trying or reset immediately ?
 			 */
-			if(el_debug>1)
-				printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
-			  		" gp=%03x rp=%03x.\n", dev->name, txsr, axsr,
-			inw(ioaddr + EL1_DATAPTR), inw(ioaddr + EL1_RXPTR));
+			if (el_debug > 1)
+				printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
+					dev->name, txsr, axsr,
+					inw(ioaddr + EL1_DATAPTR),
+					inw(ioaddr + EL1_RXPTR));
 			lp->txing = 0;
 			netif_wake_queue(dev);
-		}
-		else if (txsr & TX_16COLLISIONS)
-		{
+		} else if (txsr & TX_16COLLISIONS) {
 			/*
 			 *	Timed out
 			 */
 			if (el_debug)
-				printk (KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n",dev->name);
+				printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
 			outb(AX_SYS, AX_CMD);
 			lp->txing = 0;
 			dev->stats.tx_aborted_errors++;
 			netif_wake_queue(dev);
-		}
-		else if (txsr & TX_COLLISION)
-		{
+		} else if (txsr & TX_COLLISION) {
 			/*
 			 *	Retrigger xmit.
 			 */
@@ -599,7 +595,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			if (el_debug > 6)
 				printk(KERN_DEBUG " retransmitting after a collision.\n");
 			/*
-			 *	Poor little chip can't reset its own start pointer
+			 *	Poor little chip can't reset its own start
+			 *	pointer
 			 */
 
 			outb(AX_SYS, AX_CMD);
@@ -608,53 +605,45 @@ static irqreturn_t el_interrupt(int irq, void *dev_id)
 			dev->stats.collisions++;
 			spin_unlock(&lp->lock);
 			goto out;
-		}
-		else
-		{
+		} else {
 			/*
 			 *	It worked.. we will now fall through and receive
 			 */
 			dev->stats.tx_packets++;
 			if (el_debug > 6)
 				printk(KERN_DEBUG " Tx succeeded %s\n",
-		       			(txsr & TX_RDY) ? "." : "but tx is busy!");
+					(txsr & TX_RDY) ? "." : "but tx is busy!");
 			/*
 			 *	This is safe the interrupt is atomic WRT itself.
 			 */
-
 			lp->txing = 0;
-			netif_wake_queue(dev);	/* In case more to transmit */
+			/* In case more to transmit */
+			netif_wake_queue(dev);
 		}
-	}
-	else
-	{
-    		/*
-    		 *	In receive mode.
-    		 */
+	} else {
+		/*
+		 *	In receive mode.
+		 */
 
 		int rxsr = inb(RX_STATUS);
 		if (el_debug > 5)
-			printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS),inw(RX_LOW));
+			printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));
 		/*
 		 *	Just reading rx_status fixes most errors.
 		 */
 		if (rxsr & RX_MISSED)
 			dev->stats.rx_missed_errors++;
-		else if (rxsr & RX_RUNT)
-		{	/* Handled to avoid board lock-up. */
+		else if (rxsr & RX_RUNT) {
+			/* Handled to avoid board lock-up. */
 			dev->stats.rx_length_errors++;
 			if (el_debug > 5)
 				printk(KERN_DEBUG " runt.\n");
-		}
-		else if (rxsr & RX_GOOD)
-		{
+		} else if (rxsr & RX_GOOD) {
 			/*
 			 *	Receive worked.
 			 */
 			el_receive(dev);
-		}
-		else
-		{
+		} else {
 			/*
 			 *	Nothing?  Something is broken!
 			 */
@@ -702,8 +691,7 @@ static void el_receive(struct net_device *dev)
 	if (el_debug > 4)
 		printk(KERN_DEBUG " el_receive %d.\n", pkt_len);
 
-	if ((pkt_len < 60)  ||  (pkt_len > 1536))
-	{
+	if (pkt_len < 60 || pkt_len > 1536) {
 		if (el_debug)
 			printk(KERN_DEBUG "%s: bogus packet, length=%d\n", dev->name, pkt_len);
 		dev->stats.rx_over_errors++;
@@ -722,26 +710,23 @@ static void el_receive(struct net_device *dev)
 	 */
 
 	outw(0x00, GP_LOW);
-	if (skb == NULL)
-	{
+	if (skb == NULL) {
 		printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n", dev->name);
 		dev->stats.rx_dropped++;
 		return;
-	}
-	else
-	{
-    		skb_reserve(skb,2);	/* Force 16 byte alignment */
+	} else {
+		skb_reserve(skb, 2);	/* Force 16 byte alignment */
 		/*
 		 *	The read increments through the bytes. The interrupt
 		 *	handler will fix the pointer when it returns to
 		 *	receive mode.
 		 */
-		insb(DATAPORT, skb_put(skb,pkt_len), pkt_len);
-		skb->protocol=eth_type_trans(skb,dev);
+		insb(DATAPORT, skb_put(skb, pkt_len), pkt_len);
+		skb->protocol = eth_type_trans(skb, dev);
 		netif_rx(skb);
 		dev->last_rx = jiffies;
 		dev->stats.rx_packets++;
-		dev->stats.rx_bytes+=pkt_len;
+		dev->stats.rx_bytes += pkt_len;
 	}
 	return;
 }
@@ -760,7 +745,7 @@ static void  el_reset(struct net_device *dev)
 	struct net_local *lp = netdev_priv(dev);
 	int ioaddr = dev->base_addr;
 
-	if (el_debug> 2)
+	if (el_debug > 2)
 		printk(KERN_INFO "3c501 reset...");
 	outb(AX_RESET, AX_CMD);		/* Reset the chip */
 	outb(AX_LOOP, AX_CMD);		/* Aux control, irq and loopback enabled */
@@ -794,7 +779,8 @@ static int el1_close(struct net_device *dev)
 	int ioaddr = dev->base_addr;
 
 	if (el_debug > 2)
-		printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n", dev->name, ioaddr);
+		printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",
+						dev->name, ioaddr);
 
 	netif_stop_queue(dev);
 
@@ -822,18 +808,14 @@ static void set_multicast_list(struct net_device *dev)
 {
 	int ioaddr = dev->base_addr;
 
-	if(dev->flags&IFF_PROMISC)
-	{
+	if (dev->flags & IFF_PROMISC) {
 		outb(RX_PROM, RX_CMD);
 		inb(RX_STATUS);
-	}
-	else if (dev->mc_list || dev->flags&IFF_ALLMULTI)
-	{
-		outb(RX_MULT, RX_CMD);	/* Multicast or all multicast is the same */
+	} else if (dev->mc_list || dev->flags & IFF_ALLMULTI) {
+		/* Multicast or all multicast is the same */
+		outb(RX_MULT, RX_CMD);
 		inb(RX_STATUS);		/* Clear status. */
-	}
-	else
-	{
+	} else {
 		outb(RX_NORM, RX_CMD);
 		inb(RX_STATUS);
 	}