[media] subdev-formats.rst: adjust tables size for LaTeX output

There are two big tables here that are very hard to adjust its
size.

The first one would fit into one page, but the latex.py logic
at Sphinx auto-switches to longtable when there are more than 30
rows. There's no way to override without coding.

The second one is really big, and won't fit on a single page.
So, it has to use tiny font to fit.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/media/uapi/v4l/subdev-formats.rst

@@ -154,18 +154,26 @@ half of the green value) transferred first will be named
 
 The following tables list existing packed RGB formats.
 
-.. FIXME: I was unable to find a way to use adjustbox or landscape for this table!
+.. HACK: ideally, we would be using adjustbox here. However, Sphinx
+.. is a very bad behaviored guy: if the table has more than 30 cols,
+.. it switches to long table, and there's no way to override it.
 
-.. tabularcolumns:: |p{7.6cm}|p{1.6cm}|p{0.7cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{-1.0cm}|
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22}|
 
 .. _v4l2-mbus-pixelcode-rgb:
 
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
+
 .. flat-table:: RGB formats
     :header-rows:  2
     :stub-columns: 0
     :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
 
-
     -  .. row 1
 
        -  Identifier
@@ -2355,6 +2363,10 @@ The following tables list existing packed RGB formats.
 
        -  b\ :sub:`0`
 
+.. raw:: latex
+
+    \endgroup
+
 On LVDS buses, usually each sample is transferred serialized in seven
 time slots per pixel clock, on three (18-bit) or four (24-bit)
 differential data pairs at the same time. The remaining bits are used
@@ -3751,13 +3763,22 @@ the following codes.
 
 -  d for dummy bits
 
-.. FIXME: I was unable to find a way to use adjustbox or landscape for this table!
 
-.. tabularcolumns:: |p{7.6cm}|p{1.6cm}|p{0.7cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{-1.0cm}|
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22}|
 
 .. _v4l2-mbus-pixelcode-yuv8:
 
-.. cssclass:: longtable
+
+.. HACK: ideally, we would be using adjustbox here. However, this
+.. will never work for this table, as, even with tiny font, it is
+.. to big for a single page. So, we need to manually adjust the
+.. size.
+
+.. raw:: latex
+
+    \begingroup
+    \tiny
+    \setlength{\tabcolsep}{2pt}
 
 .. flat-table:: YUV Formats
     :header-rows:  2
@@ -11439,6 +11460,9 @@ the following codes.
        -  v\ :sub:`0`
 
 
+.. raw:: latex
+
+	\endgroup
 
 HSV/HSL Formats
 ^^^^^^^^^^^^^^^