提交 a2dd70a1 编写于 作者: A Anton Vorontsov 提交者: Kumar Gala

[POWERPC] QE: get rid of most device_types and model

Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data"
and "fsl,qe-ic".

Unfortunately it's still impossible to remove device_type = "qe"
from the existing device trees because older u-boots are looking for it.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 f67be814
......@@ -1543,7 +1543,7 @@ platforms are moved over to use the flattened-device-tree model.
i) Root QE device
Required properties:
- device_type : should be "qe";
- compatible : should be "fsl,qe";
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
......@@ -1557,8 +1557,7 @@ platforms are moved over to use the flattened-device-tree model.
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "qe";
model = "QE";
compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
......@@ -1781,7 +1780,7 @@ platforms are moved over to use the flattened-device-tree model.
vii) Multi-User RAM (MURAM)
Required properties:
- device_type : should be "muram".
- compatible : should be "fsl,qe-muram", "fsl,cpm-muram".
- mode : the could be "host" or "slave".
- ranges : Should be defined as specified in 1) to describe the
translation of MURAM addresses.
......@@ -1791,10 +1790,12 @@ platforms are moved over to use the flattened-device-tree model.
Example:
muram@10000 {
device_type = "muram";
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 c000>;
};
};
......
......@@ -206,17 +206,18 @@
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
device_type = "muram";
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 4000>;
};
};
......@@ -320,9 +321,9 @@
};
};
qeic: qeic@80 {
qeic: interrupt-controller@80 {
interrupt-controller;
device_type = "qeic";
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
......
......@@ -166,17 +166,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
device_type = "muram";
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 00004000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 4000>;
};
};
......@@ -252,9 +254,9 @@
};
};
qeic:qeic@80 {
qeic:interrupt-controller@80 {
interrupt-controller;
device_type = "qeic";
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
......
......@@ -207,17 +207,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
compatible = "fsl,qe";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
device_type = "muram";
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 c000>;
};
};
......@@ -303,9 +305,9 @@
};
};
qeic: qeic@80 {
qeic: interrupt-controller@80 {
interrupt-controller;
device_type = "qeic";
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
......
......@@ -284,17 +284,19 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
compatible = "fsl,qe";
ranges = <0 e0080000 00040000>;
reg = <e0080000 480>;
brg-frequency = <0>;
bus-frequency = <179A7B00>;
muram@10000 {
device_type = "muram";
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0 00010000 0000c000>;
data-only@0{
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0 c000>;
};
};
......@@ -385,9 +387,9 @@
};
};
qeic: qeic@80 {
qeic: interrupt-controller@80 {
interrupt-controller;
device_type = "qeic";
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
......
......@@ -105,6 +105,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
};
......@@ -134,10 +135,12 @@ static void __init mpc832x_sys_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
......
......@@ -115,6 +115,7 @@ static struct of_device_id mpc832x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
};
......@@ -145,10 +146,12 @@ void __init mpc832x_rdb_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
......
......@@ -136,6 +136,7 @@ static struct of_device_id mpc836x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
};
......@@ -165,10 +166,12 @@ static void __init mpc836x_mds_init_IRQ(void)
of_node_put(np);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
......
......@@ -94,21 +94,25 @@ static void __init mpc85xx_mds_setup_arch(void)
#endif
#ifdef CONFIG_QUICC_ENGINE
if ((np = of_find_node_by_name(NULL, "qe")) != NULL) {
qe_reset();
of_node_put(np);
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np)
return;
}
if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
struct device_node *ucc = NULL;
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for ( ;(ucc = of_find_node_by_name(ucc, "ucc")) != NULL;)
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
of_node_put(ucc);
}
if (bcsr_regs) {
......@@ -131,7 +135,6 @@ static void __init mpc85xx_mds_setup_arch(void)
iounmap(bcsr_regs);
}
#endif /* CONFIG_QUICC_ENGINE */
}
......@@ -139,6 +142,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{ .compatible = "fsl,qe", },
{},
};
......@@ -176,10 +180,12 @@ static void __init mpc85xx_mds_pic_init(void)
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
#endif /* CONFIG_QUICC_ENGINE */
......
......@@ -1276,7 +1276,10 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
const u32 *sysclk;
/* SPI controller is either clocked from QE or SoC clock */
np = of_find_node_by_type(NULL, "qe");
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np)
np = of_find_node_by_type(NULL, "qe");
if (!np)
np = of_find_node_by_type(NULL, "soc");
......
......@@ -65,17 +65,22 @@ static phys_addr_t qebase = -1;
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
unsigned int size;
const void *prop;
if (qebase != -1)
return qebase;
qe = of_find_node_by_type(NULL, "qe");
if (qe) {
unsigned int size;
const void *prop = of_get_property(qe, "reg", &size);
qebase = of_translate_address(qe, prop);
of_node_put(qe);
};
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return qebase;
}
prop = of_get_property(qe, "reg", &size);
qebase = of_translate_address(qe, prop);
of_node_put(qe);
return qebase;
}
......@@ -153,16 +158,26 @@ static unsigned int brg_clk = 0;
unsigned int get_brg_clk(void)
{
struct device_node *qe;
unsigned int size;
const u32 *prop;
if (brg_clk)
return brg_clk;
qe = of_find_node_by_type(NULL, "qe");
if (qe) {
unsigned int size;
const u32 *prop = of_get_property(qe, "brg-frequency", &size);
brg_clk = *prop;
of_node_put(qe);
};
qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!qe) {
qe = of_find_node_by_type(NULL, "qe");
if (!qe)
return brg_clk;
}
prop = of_get_property(qe, "brg-frequency", &size);
if (!prop || size != sizeof(*prop))
return brg_clk;
brg_clk = *prop;
of_node_put(qe);
return brg_clk;
}
......@@ -322,7 +337,7 @@ static rh_info_t qe_muram_info;
static void qe_muram_init(void)
{
struct device_node *np;
u32 address;
const u32 *address;
u64 size;
unsigned int flags;
......@@ -335,11 +350,21 @@ static void qe_muram_init(void)
/* XXX: This is a subset of the available muram. It
* varies with the processor and the microcode patches activated.
*/
if ((np = of_find_node_by_name(NULL, "data-only")) != NULL) {
address = *of_get_address(np, 0, &size, &flags);
of_node_put(np);
rh_attach_region(&qe_muram_info, address, (int) size);
np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
if (!np) {
np = of_find_node_by_name(NULL, "data-only");
if (!np) {
WARN_ON(1);
return;
}
}
address = of_get_address(np, 0, &size, &flags);
WARN_ON(!address);
of_node_put(np);
if (address)
rh_attach_region(&qe_muram_info, *address, (int)size);
}
/* This function returns an index into the MURAM area.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册