perf_counter, x86: implement the interrupt handler for AMD cpus

This patch implements the interrupt handler for AMD performance
counters. In difference to the Intel pmu, there is no single status
register and also there are no fixed counters. This makes the handler
very different and it is useful to make the handler vendor
specific. To check if a counter is overflowed the upper bit of the
counter is checked. Only counters where the active bit is set are
checked.

With this patch throttling is enabled for AMD performance counters.

This patch also reenables Linux performance counters on AMD cpus.

[ Impact: re-enable perfcounters on AMD CPUs ]
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1241002046-8832-25-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/cpu/perf_counter.c

@@ -240,10 +240,6 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	struct hw_perf_counter *hwc = &counter->hw;
 	int err;
 
-	/* disable temporarily */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
-		return -ENOSYS;
-
 	if (!x86_pmu_initialized())
 		return -ENODEV;
 
@@ -773,7 +769,43 @@ static int intel_pmu_handle_irq(struct pt_regs *regs, int nmi)
 	return ret;
 }
 
-static int amd_pmu_handle_irq(struct pt_regs *regs, int nmi) { return 0; }
+static int amd_pmu_handle_irq(struct pt_regs *regs, int nmi)
+{
+	int cpu = smp_processor_id();
+	struct cpu_hw_counters *cpuc = &per_cpu(cpu_hw_counters, cpu);
+	u64 val;
+	int handled = 0;
+	struct perf_counter *counter;
+	struct hw_perf_counter *hwc;
+	int idx;
+
+	++cpuc->interrupts;
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		if (!test_bit(idx, cpuc->active))
+			continue;
+		counter = cpuc->counters[idx];
+		hwc = &counter->hw;
+		x86_perf_counter_update(counter, hwc, idx);
+		val = atomic64_read(&hwc->prev_count);
+		if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+			continue;
+		/* counter overflow */
+		x86_perf_counter_set_period(counter, hwc, idx);
+		handled = 1;
+		inc_irq_stat(apic_perf_irqs);
+		if (perf_counter_overflow(counter, nmi, regs, 0))
+			amd_pmu_disable_counter(hwc, idx);
+		else if (cpuc->interrupts >= PERFMON_MAX_INTERRUPTS)
+			/*
+			 * do not reenable when throttled, but reload
+			 * the register
+			 */
+			amd_pmu_disable_counter(hwc, idx);
+		else if (counter->state == PERF_COUNTER_STATE_ACTIVE)
+			amd_pmu_enable_counter(hwc, idx);
+	}
+	return handled;
+}
 
 void perf_counter_unthrottle(void)
 {
@@ -782,9 +814,6 @@ void perf_counter_unthrottle(void)
 	if (!x86_pmu_initialized())
 		return;
 
-	if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-		return;
-
 	cpuc = &__get_cpu_var(cpu_hw_counters);
 	if (cpuc->interrupts >= PERFMON_MAX_INTERRUPTS) {
 		if (printk_ratelimit())