Merge tag 'for-v3.12' of git://git.infradead.org/battery-2.6

Pull battery/power supply driver updates from Anton Vorontsov:
 "New drivers:

   - APM X-Gene system reboot driver by Feng Kan and Loc Ho (APM).

   - Qualcomm MSM reboot/poweroff driver by Abhimanyu Kapur (Codeaurora).

   - Texas Instruments BQ24190 charger driver by Mark A.  Greer (Animal
     Creek Technologies).

   - Texas Instruments TWL4030 MADC battery driver by Lukas Märdian and
     Marek Belisko (Golden Delicious Computers).  The driver is used on
     Freerunner GTA04 phones.

  Highlighted fixes and improvements:

   - Suspend/wakeup logic improvements: power supply objects will block
     system suspend until all power supply events are processed.  Thanks
     to Zoran Markovic (Linaro), Arve Hjonnevag and Todd Poynor (Google)"

* tag 'for-v3.12' of git://git.infradead.org/battery-2.6:
  rx51_battery: Fix channel number when reading adc value
  power: Add twl4030_madc battery driver.
  bq24190_charger: Workaround SS definition problem on i386 builds
  power_supply: Prevent suspend until power supply events are processed
  vexpress-poweroff: Should depend on the required infrastructure
  twl4030-charger: Fix compiler warning with regulator_enable()
  rx51_battery: Replace hardcoded channels values.
  bq24190_charger: Add support for TI BQ24190 Battery Charger
  ab8500-charger: We print an unintended error message
  max8925_power: Fix missing of_node_put
  power_supply: Replace strict_strtol() with kstrtol()
  power: Add APM X-Gene system reboot driver
  power_supply: tosa_battery: Get rid of irq_to_gpio usage
  power supply: collie_battery: Convert to use dev_pm_ops
  power_supply: Make goldfish_battery depend on GOLDFISH || COMPILE_TEST
  power: reset: Add msm restart support
  MAINTAINERS: drivers/power: add entry for SmartReflex AVS drivers

Documentation/devicetree/bindings/power_supply/msm-poweroff.txt

+MSM Restart Driver
+
+A power supply hold (ps-hold) bit is set to power the msm chipsets.
+Clearing that bit allows us to restart/poweroff. The difference
+between poweroff and restart is determined by unique power manager IC
+settings.
+
+Required Properties:
+-compatible: "qcom,pshold"
+-reg: Specifies the physical address of the ps-hold register
+
+Example:
+
+	restart@fc4ab000 {
+		compatible = "qcom,pshold";
+		reg = <0xfc4ab000 0x4>;
+	};

MAINTAINERS

@@ -7624,6 +7624,14 @@ S:	Maintained
 F:	Documentation/security/Smack.txt
 F:	security/smack/
 
+SMARTREFLEX DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
+M:	Kevin Hilman <khilman@kernel.org>
+M:	Nishanth Menon <nm@ti.com>
+S:	Maintained
+F:	drivers/power/avs/smartreflex.c
+F:	include/linux/power/smartreflex.h
+L:	linux-pm@vger.kernel.org
+
 SMC91x ETHERNET DRIVER
 M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes

drivers/power/Kconfig

@@ -216,6 +216,13 @@ config BATTERY_S3C_ADC
 	help
 	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 
+config BATTERY_TWL4030_MADC
+	tristate "TWL4030 MADC battery driver"
+	depends on TWL4030_MADC
+	help
+	  Say Y here to enable this dumb driver for batteries managed
+	  through the TWL4030 MADC.
+
 config CHARGER_88PM860X
 	tristate "Marvell 88PM860x Charger driver"
 	depends on MFD_88PM860X && BATTERY_88PM860X
@@ -334,6 +341,12 @@ config CHARGER_BQ2415X
 	  You'll need this driver to charge batteries on e.g. Nokia
 	  RX-51/N900.
 
+config CHARGER_BQ24190
+	tristate "TI BQ24190 battery charger driver"
+	depends on I2C && GPIOLIB
+	help
+	  Say Y to enable support for the TI BQ24190 battery charger.
+
 config CHARGER_SMB347
 	tristate "Summit Microelectronics SMB347 Battery Charger"
 	depends on I2C
@@ -357,7 +370,7 @@ config AB8500_BM
 
 config BATTERY_GOLDFISH
 	tristate "Goldfish battery driver"
-	depends on GENERIC_HARDIRQS
+	depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
 	help
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.

drivers/power/Makefile

@@ -34,6 +34,7 @@ obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
+obj-$(CONFIG_BATTERY_TWL4030_MADC)	+= twl4030_madc_battery.o
 obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
@@ -50,6 +51,7 @@ obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
 obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o

drivers/power/ab8500_charger.c

@@ -774,6 +774,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
 				di->max_usb_in_curr.usb_type_max);
+		break;
 	case USB_STAT_NOT_VALID_LINK:
 		dev_err(di->dev, "USB Type invalid - try charging anyway\n");
 		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;

drivers/power/collie_battery.c

@@ -287,7 +287,7 @@ static struct gpio collie_batt_gpios[] = {
 };
 
 #ifdef CONFIG_PM
-static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
+static int collie_bat_suspend(struct ucb1x00_dev *dev)
 {
 	/* flush all pending status updates */
 	flush_work(&bat_work);

drivers/power/max8925_power.c

@@ -458,6 +458,7 @@ max8925_power_dt_init(struct platform_device *pdev)
 	of_property_read_u32(np, "fast-charge", &fast_charge);
 	of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
 	of_property_read_u32(np, "no-temp-support", &no_temp_support);
+	of_node_put(np);
 
 	pdata->batt_detect = batt_detect;
 	pdata->fast_charge = fast_charge;

drivers/power/power_supply_core.c

@@ -67,23 +67,42 @@ static int __power_supply_changed_work(struct device *dev, void *data)
 
 static void power_supply_changed_work(struct work_struct *work)
 {
+	unsigned long flags;
 	struct power_supply *psy = container_of(work, struct power_supply,
 						changed_work);
 
 	dev_dbg(psy->dev, "%s\n", __func__);
 
-	class_for_each_device(power_supply_class, NULL, psy,
-			      __power_supply_changed_work);
-
-	power_supply_update_leds(psy);
-
-	kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+	spin_lock_irqsave(&psy->changed_lock, flags);
+	if (psy->changed) {
+		psy->changed = false;
+		spin_unlock_irqrestore(&psy->changed_lock, flags);
+		class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_changed_work);
+		power_supply_update_leds(psy);
+		kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+		spin_lock_irqsave(&psy->changed_lock, flags);
+	}
+	/*
+	 * Dependent power supplies (e.g. battery) may have changed state
+	 * as a result of this event, so poll again and hold the
+	 * wakeup_source until all events are processed.
+	 */
+	if (!psy->changed)
+		pm_relax(psy->dev);
+	spin_unlock_irqrestore(&psy->changed_lock, flags);
 }
 
 void power_supply_changed(struct power_supply *psy)
 {
+	unsigned long flags;
+
 	dev_dbg(psy->dev, "%s\n", __func__);
 
+	spin_lock_irqsave(&psy->changed_lock, flags);
+	psy->changed = true;
+	pm_stay_awake(psy->dev);
+	spin_unlock_irqrestore(&psy->changed_lock, flags);
 	schedule_work(&psy->changed_work);
 }
 EXPORT_SYMBOL_GPL(power_supply_changed);
@@ -500,6 +519,11 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
 		goto check_supplies_failed;
 	}
 
+	spin_lock_init(&psy->changed_lock);
+	rc = device_init_wakeup(dev, true);
+	if (rc)
+		goto wakeup_init_failed;
+
 	rc = kobject_set_name(&dev->kobj, "%s", psy->name);
 	if (rc)
 		goto kobject_set_name_failed;
@@ -529,6 +553,7 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
 register_cooler_failed:
 	psy_unregister_thermal(psy);
 register_thermal_failed:
+wakeup_init_failed:
 	device_del(dev);
 kobject_set_name_failed:
 device_add_failed:
@@ -546,6 +571,7 @@ void power_supply_unregister(struct power_supply *psy)
 	power_supply_remove_triggers(psy);
 	psy_unregister_cooler(psy);
 	psy_unregister_thermal(psy);
+	device_init_wakeup(psy->dev, false);
 	device_unregister(psy->dev);
 }
 EXPORT_SYMBOL_GPL(power_supply_unregister);

drivers/power/power_supply_sysfs.c

@@ -118,7 +118,7 @@ static ssize_t power_supply_store_property(struct device *dev,
 	long long_val;
 
 	/* TODO: support other types than int */
-	ret = strict_strtol(buf, 10, &long_val);
+	ret = kstrtol(buf, 10, &long_val);
 	if (ret < 0)
 		return ret;
 

drivers/power/reset/Kconfig

@@ -14,6 +14,12 @@ config POWER_RESET_GPIO
 	  If your board needs a GPIO high/low to power down, say Y and
 	  create a binding in your devicetree.
 
+config POWER_RESET_MSM
+	bool "Qualcomm MSM power-off driver"
+	depends on POWER_RESET && ARCH_MSM
+	help
+	  Power off and restart support for Qualcomm boards.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && POWER_RESET && PLAT_ORION
@@ -34,7 +40,14 @@ config POWER_RESET_RESTART
 config POWER_RESET_VEXPRESS
 	bool "ARM Versatile Express power-off and reset driver"
 	depends on ARM || ARM64
-	depends on POWER_RESET
+	depends on POWER_RESET && VEXPRESS_CONFIG
 	help
 	  Power off and reset support for the ARM Ltd. Versatile
 	  Express boards.
+
+config POWER_RESET_XGENE
+	bool "APM SoC X-Gene reset driver"
+	depends on ARM64
+	depends on POWER_RESET
+	help
+	  Reboot support for the APM SoC X-Gene Eval boards.

drivers/power/reset/Makefile

 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
 obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
 obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
+obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o

drivers/power/reset/msm-poweroff.c

+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+static void __iomem *msm_ps_hold;
+
+static void do_msm_restart(enum reboot_mode reboot_mode, const char *cmd)
+{
+	writel(0, msm_ps_hold);
+	mdelay(10000);
+}
+
+static void do_msm_poweroff(void)
+{
+	/* TODO: Add poweroff capability */
+	do_msm_restart(REBOOT_HARD, NULL);
+}
+
+static int msm_restart_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *mem;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	msm_ps_hold = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(msm_ps_hold))
+		return PTR_ERR(msm_ps_hold);
+
+	pm_power_off = do_msm_poweroff;
+	arm_pm_restart = do_msm_restart;
+	return 0;
+}
+
+static const struct of_device_id of_msm_restart_match[] = {
+	{ .compatible = "qcom,pshold", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_msm_restart_match);
+
+static struct platform_driver msm_restart_driver = {
+	.probe = msm_restart_probe,
+	.driver = {
+		.name = "msm-restart",
+		.of_match_table = of_match_ptr(of_msm_restart_match),
+	},
+};
+
+static int __init msm_restart_init(void)
+{
+	return platform_driver_register(&msm_restart_driver);
+}
+device_initcall(msm_restart_init);

drivers/power/reset/xgene-reboot.c

+/*
+ * AppliedMicro X-Gene SoC Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ * Author: Loc Ho <lho@apm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This driver provides system reboot functionality for APM X-Gene SoC.
+ * For system shutdown, this is board specify. If a board designer
+ * implements GPIO shutdown, use the gpio-poweroff.c driver.
+ */
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <asm/system_misc.h>
+
+struct xgene_reboot_context {
+	struct platform_device *pdev;
+	void *csr;
+	u32 mask;
+};
+
+static struct xgene_reboot_context *xgene_restart_ctx;
+
+static void xgene_restart(char str, const char *cmd)
+{
+	struct xgene_reboot_context *ctx = xgene_restart_ctx;
+	unsigned long timeout;
+
+	/* Issue the reboot */
+	if (ctx)
+		writel(ctx->mask, ctx->csr);
+
+	timeout = jiffies + HZ;
+	while (time_before(jiffies, timeout))
+		cpu_relax();
+
+	dev_emerg(&ctx->pdev->dev, "Unable to restart system\n");
+}
+
+static int xgene_reboot_probe(struct platform_device *pdev)
+{
+	struct xgene_reboot_context *ctx;
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(&pdev->dev, "out of memory for context\n");
+		return -ENODEV;
+	}
+
+	ctx->csr = of_iomap(pdev->dev.of_node, 0);
+	if (!ctx->csr) {
+		devm_kfree(&pdev->dev, ctx);
+		dev_err(&pdev->dev, "can not map resource\n");
+		return -ENODEV;
+	}
+
+	if (of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask))
+		ctx->mask = 0xFFFFFFFF;
+
+	ctx->pdev = pdev;
+	arm_pm_restart = xgene_restart;
+	xgene_restart_ctx = ctx;
+
+	return 0;
+}
+
+static struct of_device_id xgene_reboot_of_match[] = {
+	{ .compatible = "apm,xgene-reboot" },
+	{}
+};
+
+static struct platform_driver xgene_reboot_driver = {
+	.probe = xgene_reboot_probe,
+	.driver = {
+		.name = "xgene-reboot",
+		.of_match_table = xgene_reboot_of_match,
+	},
+};
+
+static int __init xgene_reboot_init(void)
+{
+	return platform_driver_register(&xgene_reboot_driver);
+}
+device_initcall(xgene_reboot_init);

drivers/power/rx51_battery.c

@@ -25,6 +25,10 @@
 #include <linux/slab.h>
 #include <linux/i2c/twl4030-madc.h>
 
+/* RX51 specific channels */
+#define TWL4030_MADC_BTEMP_RX51	TWL4030_MADC_ADCIN0
+#define TWL4030_MADC_BCI_RX51	TWL4030_MADC_ADCIN4
+
 struct rx51_device_info {
 	struct device *dev;
 	struct power_supply bat;
@@ -37,7 +41,7 @@ static int rx51_battery_read_adc(int channel)
 {
 	struct twl4030_madc_request req;
 
-	req.channels = 1 << channel;
+	req.channels = channel;
 	req.do_avg = 1;
 	req.method = TWL4030_MADC_SW1;
 	req.func_cb = NULL;
@@ -47,7 +51,7 @@ static int rx51_battery_read_adc(int channel)
 	if (twl4030_madc_conversion(&req) <= 0)
 		return -ENODATA;
 
-	return req.rbuf[channel];
+	return req.rbuf[ffs(channel) - 1];
 }
 
 /*
@@ -56,7 +60,7 @@ static int rx51_battery_read_adc(int channel)
  */
 static int rx51_battery_read_voltage(struct rx51_device_info *di)
 {
-	int voltage = rx51_battery_read_adc(12);
+	int voltage = rx51_battery_read_adc(TWL4030_MADC_VBAT);
 
 	if (voltage < 0)
 		return voltage;
@@ -108,7 +112,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
 {
 	int min = 0;
 	int max = ARRAY_SIZE(rx51_temp_table2) - 1;
-	int raw = rx51_battery_read_adc(0);
+	int raw = rx51_battery_read_adc(TWL4030_MADC_BTEMP_RX51);
 
 	/* Zero and negative values are undefined */
 	if (raw <= 0)
@@ -142,7 +146,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di)
  */
 static int rx51_battery_read_capacity(struct rx51_device_info *di)
 {
-	int capacity = rx51_battery_read_adc(4);
+	int capacity = rx51_battery_read_adc(TWL4030_MADC_BCI_RX51);
 
 	if (capacity < 0)
 		return capacity;

drivers/power/tosa_battery.c

@@ -150,7 +150,7 @@ static void tosa_bat_external_power_changed(struct power_supply *psy)
 
 static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
 {
-	pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	pr_info("tosa_bat_gpio irq\n");
 	schedule_work(&bat_work);
 	return IRQ_HANDLED;
 }

drivers/power/twl4030_charger.c

@@ -189,7 +189,12 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 
 		/* Need to keep regulator on */
 		if (!bci->usb_enabled) {
-			regulator_enable(bci->usb_reg);
+			ret = regulator_enable(bci->usb_reg);
+			if (ret) {
+				dev_err(bci->dev,
+					"Failed to enable regulator\n");
+				return ret;
+			}
 			bci->usb_enabled = 1;
 		}
 

drivers/power/twl4030_madc_battery.c

+/*
+ * Dumb driver for LiIon batteries using TWL4030 madc.
+ *
+ * Copyright 2013 Golden Delicious Computers
+ * Lukas Märdian <lukas@goldelico.com>
+ *
+ * Based on dumb driver for gta01 battery
+ * Copyright 2009 Openmoko, Inc
+ * Balaji Rao <balajirrao@openmoko.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/i2c/twl4030-madc.h>
+#include <linux/power/twl4030_madc_battery.h>
+
+struct twl4030_madc_battery {
+	struct power_supply psy;
+	struct twl4030_madc_bat_platform_data *pdata;
+};
+
+static enum power_supply_property twl4030_madc_bat_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+};
+
+static int madc_read(int index)
+{
+	struct twl4030_madc_request req;
+	int val;
+
+	req.channels = index;
+	req.method = TWL4030_MADC_SW2;
+	req.type = TWL4030_MADC_WAIT;
+	req.do_avg = 0;
+	req.raw = false;
+	req.func_cb = NULL;
+
+	val = twl4030_madc_conversion(&req);
+	if (val < 0)
+		return val;
+
+	return req.rbuf[ffs(index) - 1];
+}
+
+static int twl4030_madc_bat_get_charging_status(void)
+{
+	return (madc_read(TWL4030_MADC_ICHG) > 0) ? 1 : 0;
+}
+
+static int twl4030_madc_bat_get_voltage(void)
+{
+	return madc_read(TWL4030_MADC_VBAT);
+}
+
+static int twl4030_madc_bat_get_current(void)
+{
+	return madc_read(TWL4030_MADC_ICHG) * 1000;
+}
+
+static int twl4030_madc_bat_get_temp(void)
+{
+	return madc_read(TWL4030_MADC_BTEMP) * 10;
+}
+
+static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat,
+					int volt)
+{
+	struct twl4030_madc_bat_calibration *calibration;
+	int i, res = 0;
+
+	/* choose charging curve */
+	if (twl4030_madc_bat_get_charging_status())
+		calibration = bat->pdata->charging;
+	else
+		calibration = bat->pdata->discharging;
+
+	if (volt > calibration[0].voltage) {
+		res = calibration[0].level;
+	} else {
+		for (i = 0; calibration[i+1].voltage >= 0; i++) {
+			if (volt <= calibration[i].voltage &&
+					volt >= calibration[i+1].voltage) {
+				/* interval found - interpolate within range */
+				res = calibration[i].level -
+					((calibration[i].voltage - volt) *
+					(calibration[i].level -
+					calibration[i+1].level)) /
+					(calibration[i].voltage -
+					calibration[i+1].voltage);
+				break;
+			}
+		}
+	}
+	return res;
+}
+
+static int twl4030_madc_bat_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct twl4030_madc_battery *bat = container_of(psy,
+					struct twl4030_madc_battery, psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (twl4030_madc_bat_voltscale(bat,
+				twl4030_madc_bat_get_voltage()) > 95)
+			val->intval = POWER_SUPPLY_STATUS_FULL;
+		else {
+			if (twl4030_madc_bat_get_charging_status())
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		}
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = twl4030_madc_bat_get_voltage() * 1000;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = twl4030_madc_bat_get_current();
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		/* assume battery is always present */
+		val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW: {
+			int percent = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage());
+			val->intval = (percent * bat->pdata->capacity) / 100;
+			break;
+		}
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage());
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = bat->pdata->capacity;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = twl4030_madc_bat_get_temp();
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: {
+			int percent = twl4030_madc_bat_voltscale(bat,
+					twl4030_madc_bat_get_voltage());
+			/* in mAh */
+			int chg = (percent * (bat->pdata->capacity/1000))/100;
+
+			/* assume discharge with 400 mA (ca. 1.5W) */
+			val->intval = (3600l * chg) / 400;
+			break;
+		}
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
+{
+	struct twl4030_madc_battery *bat = container_of(psy,
+					struct twl4030_madc_battery, psy);
+
+	power_supply_changed(&bat->psy);
+}
+
+static int twl4030_cmp(const void *a, const void *b)
+{
+	return ((struct twl4030_madc_bat_calibration *)b)->voltage -
+		((struct twl4030_madc_bat_calibration *)a)->voltage;
+}
+
+static int twl4030_madc_battery_probe(struct platform_device *pdev)
+{
+	struct twl4030_madc_battery *twl4030_madc_bat;
+	struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
+
+	twl4030_madc_bat = kzalloc(sizeof(*twl4030_madc_bat), GFP_KERNEL);
+	if (!twl4030_madc_bat)
+		return -ENOMEM;
+
+	twl4030_madc_bat->psy.name = "twl4030_battery";
+	twl4030_madc_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+	twl4030_madc_bat->psy.properties = twl4030_madc_bat_props;
+	twl4030_madc_bat->psy.num_properties =
+					ARRAY_SIZE(twl4030_madc_bat_props);
+	twl4030_madc_bat->psy.get_property = twl4030_madc_bat_get_property;
+	twl4030_madc_bat->psy.external_power_changed =
+					twl4030_madc_bat_ext_changed;
+
+	/* sort charging and discharging calibration data */
+	sort(pdata->charging, pdata->charging_size,
+		sizeof(struct twl4030_madc_bat_calibration),
+		twl4030_cmp, NULL);
+	sort(pdata->discharging, pdata->discharging_size,
+		sizeof(struct twl4030_madc_bat_calibration),
+		twl4030_cmp, NULL);
+
+	twl4030_madc_bat->pdata = pdata;
+	platform_set_drvdata(pdev, twl4030_madc_bat);
+	power_supply_register(&pdev->dev, &twl4030_madc_bat->psy);
+
+	return 0;
+}
+
+static int twl4030_madc_battery_remove(struct platform_device *pdev)
+{
+	struct twl4030_madc_battery *bat = platform_get_drvdata(pdev);
+
+	power_supply_unregister(&bat->psy);
+	kfree(bat);
+
+	return 0;
+}
+
+static struct platform_driver twl4030_madc_battery_driver = {
+	.driver = {
+		.name = "twl4030_madc_battery",
+	},
+	.probe  = twl4030_madc_battery_probe,
+	.remove = twl4030_madc_battery_remove,
+};
+module_platform_driver(twl4030_madc_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>");
+MODULE_DESCRIPTION("twl4030_madc battery driver");

include/linux/power/bq24190_charger.h

+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+struct bq24190_platform_data {
+	unsigned int	gpio_int;	/* GPIO pin that's connected to INT# */
+};
+
+#endif

include/linux/power/twl4030_madc_battery.h

+/*
+ * Dumb driver for LiIon batteries using TWL4030 madc.
+ *
+ * Copyright 2013 Golden Delicious Computers
+ * Nikolaus Schaller <hns@goldelico.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __TWL4030_MADC_BATTERY_H
+#define __TWL4030_MADC_BATTERY_H
+
+/*
+ * Usually we can assume 100% @ 4.15V and 0% @ 3.3V but curves differ for
+ * charging and discharging!
+ */
+
+struct twl4030_madc_bat_calibration {
+	short voltage;	/* in mV - specify -1 for end of list */
+	short level;	/* in percent (0 .. 100%) */
+};
+
+struct twl4030_madc_bat_platform_data {
+	unsigned int capacity;	/* total capacity in uAh */
+	struct twl4030_madc_bat_calibration *charging;
+	int charging_size;
+	struct twl4030_madc_bat_calibration *discharging;
+	int discharging_size;
+};
+
+#endif

include/linux/power_supply.h

@@ -15,6 +15,7 @@
 
 #include <linux/workqueue.h>
 #include <linux/leds.h>
+#include <linux/spinlock.h>
 
 struct device;
 
@@ -194,6 +195,8 @@ struct power_supply {
 	/* private */
 	struct device *dev;
 	struct work_struct changed_work;
+	spinlock_t changed_lock;
+	bool changed;
 #ifdef CONFIG_THERMAL
 	struct thermal_zone_device *tzd;
 	struct thermal_cooling_device *tcd;