提交 a1f34af0 编写于 作者: J Jiri Prchal 提交者: Mark Brown

ASoC: tlv320aic3x: add input clock selection

This patch adds input selection of main codec clock - from what pin.
Both registers set same value since codec uses clock divider or pll at one time.
Signed-off-by: NJiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 bb1daa80
......@@ -1002,6 +1002,12 @@ static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
struct snd_soc_codec *codec = codec_dai->codec;
struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
/* set clock on MCLK or GPIO2 or BCLK */
snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, PLLCLK_IN_MASK,
clk_id << PLLCLK_IN_SHIFT);
snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, CLKDIV_IN_MASK,
clk_id << CLKDIV_IN_SHIFT);
aic3x->sysclk = freq;
return 0;
}
......
......@@ -195,6 +195,14 @@
#define PLL_CLKIN_SHIFT 4
#define MCLK_SOURCE 0x0
#define PLL_CLKDIV_SHIFT 0
#define PLLCLK_IN_MASK 0x30
#define PLLCLK_IN_SHIFT 4
#define CLKDIV_IN_MASK 0xc0
#define CLKDIV_IN_SHIFT 6
/* clock in source */
#define CLKIN_MCLK 0
#define CLKIN_GPIO2 1
#define CLKIN_BCLK 2
/* Software reset register bits */
#define SOFT_RESET 0x80
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册