提交 a1c82704 编写于 作者: A Alexei Starovoitov 提交者: David S. Miller

samples/bpf: extend test_tunnel_bpf.sh with IPIP test

extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8d79266b
/* Copyright (c) 2016 VMware
* Copyright (c) 2016 Facebook
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
......@@ -188,4 +189,61 @@ int _geneve_get_tunnel(struct __sk_buff *skb)
return TC_ACT_OK;
}
SEC("ipip_set_tunnel")
int _ipip_set_tunnel(struct __sk_buff *skb)
{
struct bpf_tunnel_key key = {};
void *data = (void *)(long)skb->data;
struct iphdr *iph = data;
struct tcphdr *tcp = data + sizeof(*iph);
void *data_end = (void *)(long)skb->data_end;
int ret;
/* single length check */
if (data + sizeof(*iph) + sizeof(*tcp) > data_end) {
ERROR(1);
return TC_ACT_SHOT;
}
key.tunnel_ttl = 64;
if (iph->protocol == IPPROTO_ICMP) {
key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */
} else {
if (iph->protocol != IPPROTO_TCP || iph->ihl != 5)
return TC_ACT_SHOT;
if (tcp->dest == htons(5200))
key.remote_ipv4 = 0xac100164; /* 172.16.1.100 */
else if (tcp->dest == htons(5201))
key.remote_ipv4 = 0xac100165; /* 172.16.1.101 */
else
return TC_ACT_SHOT;
}
ret = bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
return TC_ACT_OK;
}
SEC("ipip_get_tunnel")
int _ipip_get_tunnel(struct __sk_buff *skb)
{
int ret;
struct bpf_tunnel_key key;
char fmt[] = "remote ip 0x%x\n";
ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
if (ret < 0) {
ERROR(ret);
return TC_ACT_SHOT;
}
bpf_trace_printk(fmt, sizeof(fmt), key.remote_ipv4);
return TC_ACT_OK;
}
char _license[] SEC("license") = "GPL";
......@@ -9,15 +9,13 @@
# local 172.16.1.200 remote 172.16.1.100
# veth1 IP: 172.16.1.200, tunnel dev <type>11
set -e
function config_device {
ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24
}
......@@ -67,6 +65,19 @@ function add_geneve_tunnel {
ip addr add dev $DEV 10.1.1.200/24
}
function add_ipip_tunnel {
# in namespace
ip netns exec at_ns0 \
ip link add dev $DEV_NS type $TYPE local 172.16.1.100 remote 172.16.1.200
ip netns exec at_ns0 ip link set dev $DEV_NS up
ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
# out of namespace
ip link add dev $DEV type $TYPE external
ip link set dev $DEV up
ip addr add dev $DEV 10.1.1.200/24
}
function attach_bpf {
DEV=$1
SET_TUNNEL=$2
......@@ -85,6 +96,7 @@ function test_gre {
attach_bpf $DEV gre_set_tunnel gre_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
cleanup
}
function test_vxlan {
......@@ -96,6 +108,7 @@ function test_vxlan {
attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
cleanup
}
function test_geneve {
......@@ -107,21 +120,48 @@ function test_geneve {
attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
cleanup
}
function test_ipip {
TYPE=ipip
DEV_NS=ipip00
DEV=ipip11
config_device
tcpdump -nei veth1 &
cat /sys/kernel/debug/tracing/trace_pipe &
add_ipip_tunnel
ethtool -K veth1 gso off gro off rx off tx off
ip link set dev veth1 mtu 1500
attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
ping -c 1 10.1.1.100
ip netns exec at_ns0 ping -c 1 10.1.1.200
ip netns exec at_ns0 iperf -sD -p 5200 > /dev/null
sleep 0.2
iperf -c 10.1.1.100 -n 5k -p 5200
cleanup
}
function cleanup {
set +ex
pkill iperf
ip netns delete at_ns0
ip link del veth1
ip link del $DEV
ip link del ipip11
ip link del gretap11
ip link del geneve11
pkill tcpdump
pkill cat
set -ex
}
cleanup
echo "Testing GRE tunnel..."
test_gre
cleanup
echo "Testing VXLAN tunnel..."
test_vxlan
cleanup
echo "Testing GENEVE tunnel..."
test_geneve
cleanup
echo "Success"
echo "Testing IPIP tunnel..."
test_ipip
echo "*** PASS ***"
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册