提交 a1606c7d 编写于 作者: B Ben Hutchings 提交者: David S. Miller

net: Move MII out from under NET_CORE and hide it

All drivers that select MII also need to select NET_CORE because MII
depends on it.  This is a bit ridiculous because NET_CORE is just a
menu option that doesn't enable any code by itself.

There is also no need for it to be a visible option, since its users
all select it.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 9ef71e0c
...@@ -4,7 +4,6 @@ config ETRAX_ETHERNET ...@@ -4,7 +4,6 @@ config ETRAX_ETHERNET
bool "Ethernet support" bool "Ethernet support"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
select ETHERNET select ETHERNET
select NET_CORE
select MII select MII
help help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
......
...@@ -4,7 +4,6 @@ config ETRAX_ETHERNET ...@@ -4,7 +4,6 @@ config ETRAX_ETHERNET
bool "Ethernet support" bool "Ethernet support"
depends on ETRAX_ARCH_V32 depends on ETRAX_ARCH_V32
select ETHERNET select ETHERNET
select NET_CORE
select MII select MII
help help
This option enables the ETRAX FS built-in 10/100Mbit Ethernet This option enables the ETRAX FS built-in 10/100Mbit Ethernet
......
...@@ -25,6 +25,9 @@ menuconfig NETDEVICES ...@@ -25,6 +25,9 @@ menuconfig NETDEVICES
# that for each of the symbols. # that for each of the symbols.
if NETDEVICES if NETDEVICES
config MII
tristate
config NET_CORE config NET_CORE
default y default y
bool "Network core driver support" bool "Network core driver support"
...@@ -100,13 +103,6 @@ config NET_FC ...@@ -100,13 +103,6 @@ config NET_FC
adaptor below. You also should have said Y to "SCSI support" and adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support". "SCSI generic support".
config MII
tristate "Generic Media Independent Interface device support"
help
Most ethernet controllers have MII transceiver either as an external
or internal device. It is safe to say Y or M here even if your
ethernet card lacks MII.
config IFB config IFB
tristate "Intermediate Functional Block support" tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT depends on NET_CLS_ACT
......
...@@ -67,7 +67,6 @@ config PCMCIA_3C589 ...@@ -67,7 +67,6 @@ config PCMCIA_3C589
config VORTEX config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on (PCI || EISA) && HAS_IOPORT depends on (PCI || EISA) && HAS_IOPORT
select NET_CORE
select MII select MII
---help--- ---help---
This option enables driver support for a large number of 10Mbps and This option enables driver support for a large number of 10Mbps and
......
...@@ -64,7 +64,6 @@ config JME ...@@ -64,7 +64,6 @@ config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support" tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the PCI-Express gigabit ethernet adapters This driver supports the PCI-Express gigabit ethernet adapters
...@@ -96,7 +95,6 @@ config FEALNX ...@@ -96,7 +95,6 @@ config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support" tristate "Myson MTD-8xx PCI Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here to support the Myson MTD-800 family of PCI-based Ethernet Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
...@@ -107,7 +105,6 @@ source "drivers/net/ethernet/8390/Kconfig" ...@@ -107,7 +105,6 @@ source "drivers/net/ethernet/8390/Kconfig"
config NET_NETX config NET_NETX
tristate "NetX Ethernet support" tristate "NetX Ethernet support"
select NET_CORE
select MII select MII
depends on ARCH_NETX depends on ARCH_NETX
---help--- ---help---
...@@ -125,7 +122,6 @@ source "drivers/net/ethernet/oki-semi/Kconfig" ...@@ -125,7 +122,6 @@ source "drivers/net/ethernet/oki-semi/Kconfig"
config ETHOC config ETHOC
tristate "OpenCores 10/100 Mbps Ethernet MAC support" tristate "OpenCores 10/100 Mbps Ethernet MAC support"
depends on HAS_IOMEM && HAS_DMA depends on HAS_IOMEM && HAS_DMA
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
select CRC32 select CRC32
......
...@@ -22,7 +22,6 @@ config ADAPTEC_STARFIRE ...@@ -22,7 +22,6 @@ config ADAPTEC_STARFIRE
tristate "Adaptec Starfire/DuraLAN support" tristate "Adaptec Starfire/DuraLAN support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network
......
...@@ -23,7 +23,6 @@ config BFIN_MAC ...@@ -23,7 +23,6 @@ config BFIN_MAC
tristate "Blackfin on-chip MAC support" tristate "Blackfin on-chip MAC support"
depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537) depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
select CRC32 select CRC32
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
......
...@@ -24,7 +24,6 @@ config SUN4I_EMAC ...@@ -24,7 +24,6 @@ config SUN4I_EMAC
depends on ARCH_SUNXI depends on ARCH_SUNXI
depends on OF depends on OF
select CRC32 select CRC32
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
---help--- ---help---
......
...@@ -34,7 +34,6 @@ config AMD8111_ETH ...@@ -34,7 +34,6 @@ config AMD8111_ETH
tristate "AMD 8111 (new PCI LANCE) support" tristate "AMD 8111 (new PCI LANCE) support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
If you have an AMD 8111-based PCI LANCE ethernet card, If you have an AMD 8111-based PCI LANCE ethernet card,
...@@ -60,7 +59,6 @@ config PCNET32 ...@@ -60,7 +59,6 @@ config PCNET32
tristate "AMD PCnet32 PCI support" tristate "AMD PCnet32 PCI support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
If you have a PCnet32 or PCnetPCI based network (Ethernet) card, If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
......
...@@ -22,7 +22,6 @@ config ATL2 ...@@ -22,7 +22,6 @@ config ATL2
tristate "Atheros L2 Fast Ethernet support" tristate "Atheros L2 Fast Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the Atheros L2 fast ethernet adapter. This driver supports the Atheros L2 fast ethernet adapter.
...@@ -34,7 +33,6 @@ config ATL1 ...@@ -34,7 +33,6 @@ config ATL1
tristate "Atheros/Attansic L1 Gigabit Ethernet support" tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the Atheros/Attansic L1 gigabit ethernet This driver supports the Atheros/Attansic L1 gigabit ethernet
...@@ -47,7 +45,6 @@ config ATL1E ...@@ -47,7 +45,6 @@ config ATL1E
tristate "Atheros L1E Gigabit Ethernet support" tristate "Atheros L1E Gigabit Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the Atheros L1E gigabit ethernet adapter. This driver supports the Atheros L1E gigabit ethernet adapter.
...@@ -59,7 +56,6 @@ config ATL1C ...@@ -59,7 +56,6 @@ config ATL1C
tristate "Atheros L1C Gigabit Ethernet support" tristate "Atheros L1C Gigabit Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the Atheros L1C gigabit ethernet adapter. This driver supports the Atheros L1C gigabit ethernet adapter.
......
...@@ -22,7 +22,6 @@ config B44 ...@@ -22,7 +22,6 @@ config B44
tristate "Broadcom 440x/47xx ethernet support" tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA depends on SSB_POSSIBLE && HAS_DMA
select SSB select SSB
select NET_CORE
select MII select MII
---help--- ---help---
If you have a network (Ethernet) controller of this type, say Y If you have a network (Ethernet) controller of this type, say Y
...@@ -54,7 +53,6 @@ config B44_PCI ...@@ -54,7 +53,6 @@ config B44_PCI
config BCM63XX_ENET config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support" tristate "Broadcom 63xx internal mac support"
depends on BCM63XX depends on BCM63XX
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
help help
......
...@@ -44,7 +44,6 @@ config CS89x0_PLATFORM ...@@ -44,7 +44,6 @@ config CS89x0_PLATFORM
config EP93XX_ETH config EP93XX_ETH
tristate "EP93xx Ethernet support" tristate "EP93xx Ethernet support"
depends on ARM && ARCH_EP93XX depends on ARM && ARCH_EP93XX
select NET_CORE
select MII select MII
help help
This is a driver for the ethernet hardware included in EP93xx CPUs. This is a driver for the ethernet hardware included in EP93xx CPUs.
......
...@@ -6,7 +6,6 @@ config DM9000 ...@@ -6,7 +6,6 @@ config DM9000
tristate "DM9000 support" tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS || COLDFIRE depends on ARM || BLACKFIN || MIPS || COLDFIRE
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Support for DM9000 chipset. Support for DM9000 chipset.
......
...@@ -126,7 +126,6 @@ config WINBOND_840 ...@@ -126,7 +126,6 @@ config WINBOND_840
tristate "Winbond W89c840 Ethernet support" tristate "Winbond W89c840 Ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver is for the Winbond W89c840 chip. It also works with This driver is for the Winbond W89c840 chip. It also works with
......
...@@ -36,7 +36,6 @@ config SUNDANCE ...@@ -36,7 +36,6 @@ config SUNDANCE
tristate "Sundance Alta support" tristate "Sundance Alta support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver is for the Sundance "Alta" chip. This driver is for the Sundance "Alta" chip.
......
...@@ -21,7 +21,6 @@ if NET_VENDOR_FARADAY ...@@ -21,7 +21,6 @@ if NET_VENDOR_FARADAY
config FTMAC100 config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support" tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM depends on ARM
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports the FTMAC100 10/100 Ethernet controller This driver supports the FTMAC100 10/100 Ethernet controller
......
config FS_ENET config FS_ENET
tristate "Freescale Ethernet Driver" tristate "Freescale Ethernet Driver"
depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
......
...@@ -5,7 +5,6 @@ ...@@ -5,7 +5,6 @@
config IP1000 config IP1000
tristate "IP1000 Gigabit Ethernet support" tristate "IP1000 Gigabit Ethernet support"
depends on PCI depends on PCI
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports IP1000 gigabit Ethernet cards. This driver supports IP1000 gigabit Ethernet cards.
......
...@@ -20,7 +20,6 @@ if NET_VENDOR_INTEL ...@@ -20,7 +20,6 @@ if NET_VENDOR_INTEL
config E100 config E100
tristate "Intel(R) PRO/100+ support" tristate "Intel(R) PRO/100+ support"
depends on PCI depends on PCI
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports Intel(R) PRO/100 family of adapters. This driver supports Intel(R) PRO/100 family of adapters.
......
...@@ -22,7 +22,6 @@ if NET_VENDOR_MICREL ...@@ -22,7 +22,6 @@ if NET_VENDOR_MICREL
config ARM_KS8695_ETHER config ARM_KS8695_ETHER
tristate "KS8695 Ethernet support" tristate "KS8695 Ethernet support"
depends on ARM && ARCH_KS8695 depends on ARM && ARCH_KS8695
select NET_CORE
select MII select MII
---help--- ---help---
If you wish to compile a kernel for the KS8695 and want to If you wish to compile a kernel for the KS8695 and want to
...@@ -39,7 +38,6 @@ config KS8842 ...@@ -39,7 +38,6 @@ config KS8842
config KS8851 config KS8851
tristate "Micrel KS8851 SPI" tristate "Micrel KS8851 SPI"
depends on SPI depends on SPI
select NET_CORE
select MII select MII
select CRC32 select CRC32
select EEPROM_93CX6 select EEPROM_93CX6
...@@ -49,7 +47,6 @@ config KS8851 ...@@ -49,7 +47,6 @@ config KS8851
config KS8851_MLL config KS8851_MLL
tristate "Micrel KS8851 MLL" tristate "Micrel KS8851 MLL"
depends on HAS_IOMEM depends on HAS_IOMEM
select NET_CORE
select MII select MII
---help--- ---help---
This platform driver is for Micrel KS8851 Address/data bus This platform driver is for Micrel KS8851 Address/data bus
...@@ -58,7 +55,6 @@ config KS8851_MLL ...@@ -58,7 +55,6 @@ config KS8851_MLL
config KSZ884X_PCI config KSZ884X_PCI
tristate "Micrel KSZ8841/2 PCI" tristate "Micrel KSZ8841/2 PCI"
depends on PCI depends on PCI
select NET_CORE
select MII select MII
select CRC32 select CRC32
---help--- ---help---
......
...@@ -22,7 +22,6 @@ config W90P910_ETH ...@@ -22,7 +22,6 @@ config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support" tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900 depends on ARM && ARCH_W90X900
select PHYLIB select PHYLIB
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you want to use built-in Ethernet ports Say Y here if you want to use built-in Ethernet ports
......
...@@ -5,7 +5,6 @@ ...@@ -5,7 +5,6 @@
config PCH_GBE config PCH_GBE
tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE" tristate "OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI depends on PCI
select NET_CORE
select MII select MII
select PTP_1588_CLOCK_PCH select PTP_1588_CLOCK_PCH
---help--- ---help---
......
...@@ -21,7 +21,6 @@ if NET_PACKET_ENGINE ...@@ -21,7 +21,6 @@ if NET_PACKET_ENGINE
config HAMACHI config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support" tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI depends on PCI
select NET_CORE
select MII select MII
---help--- ---help---
If you have a Gigabit Ethernet card of this type, say Y and read If you have a Gigabit Ethernet card of this type, say Y and read
......
...@@ -22,7 +22,6 @@ config R6040 ...@@ -22,7 +22,6 @@ config R6040
tristate "RDC R6040 Fast Ethernet Adapter support" tristate "RDC R6040 Fast Ethernet Adapter support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
---help--- ---help---
......
...@@ -37,7 +37,6 @@ config 8139CP ...@@ -37,7 +37,6 @@ config 8139CP
tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support" tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This is a driver for the Fast Ethernet PCI network cards based on This is a driver for the Fast Ethernet PCI network cards based on
...@@ -52,7 +51,6 @@ config 8139TOO ...@@ -52,7 +51,6 @@ config 8139TOO
tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This is a driver for the Fast Ethernet PCI network cards based on This is a driver for the Fast Ethernet PCI network cards based on
...@@ -107,7 +105,6 @@ config R8169 ...@@ -107,7 +105,6 @@ config R8169
depends on PCI depends on PCI
select FW_LOADER select FW_LOADER
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
......
...@@ -5,7 +5,6 @@ ...@@ -5,7 +5,6 @@
config SH_ETH config SH_ETH
tristate "Renesas SuperH Ethernet support" tristate "Renesas SuperH Ethernet support"
select CRC32 select CRC32
select NET_CORE
select MII select MII
select MDIO_BITBANG select MDIO_BITBANG
select PHYLIB select PHYLIB
......
...@@ -22,7 +22,6 @@ config SGI_IOC3_ETH ...@@ -22,7 +22,6 @@ config SGI_IOC3_ETH
bool "SGI IOC3 Ethernet" bool "SGI IOC3 Ethernet"
depends on PCI && SGI_IP27 depends on PCI && SGI_IP27
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
If you have a network (Ethernet) card of this type, say Y and read If you have a network (Ethernet) card of this type, say Y and read
......
...@@ -22,7 +22,6 @@ config SIS900 ...@@ -22,7 +22,6 @@ config SIS900
tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This is a driver for the Fast Ethernet PCI network cards based on This is a driver for the Fast Ethernet PCI network cards based on
...@@ -39,7 +38,6 @@ config SIS190 ...@@ -39,7 +38,6 @@ config SIS190
tristate "SiS190/SiS191 gigabit ethernet support" tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
......
...@@ -37,7 +37,6 @@ config SMC9194 ...@@ -37,7 +37,6 @@ config SMC9194
config SMC91X config SMC91X
tristate "SMC 91C9x/91C1xxx support" tristate "SMC 91C9x/91C1xxx support"
select CRC32 select CRC32
select NET_CORE
select MII select MII
depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \ depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
MN10300 || COLDFIRE || ARM64) MN10300 || COLDFIRE || ARM64)
...@@ -57,7 +56,6 @@ config PCMCIA_SMC91C92 ...@@ -57,7 +56,6 @@ config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support" tristate "SMC 91Cxx PCMCIA support"
depends on PCMCIA depends on PCMCIA
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
...@@ -70,7 +68,6 @@ config EPIC100 ...@@ -70,7 +68,6 @@ config EPIC100
tristate "SMC EtherPower II" tristate "SMC EtherPower II"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
...@@ -81,7 +78,6 @@ config EPIC100 ...@@ -81,7 +78,6 @@ config EPIC100
config SMC911X config SMC911X
tristate "SMSC LAN911[5678] support" tristate "SMSC LAN911[5678] support"
select CRC32 select CRC32
select NET_CORE
select MII select MII
depends on (ARM || SUPERH || MN10300) depends on (ARM || SUPERH || MN10300)
---help--- ---help---
...@@ -99,7 +95,6 @@ config SMSC911X ...@@ -99,7 +95,6 @@ config SMSC911X
tristate "SMSC LAN911x/LAN921x families embedded ethernet support" tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
depends on HAS_IOMEM depends on HAS_IOMEM
select CRC32 select CRC32
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
---help--- ---help---
......
config STMMAC_ETH config STMMAC_ETH
tristate "STMicroelectronics 10/100/1000 Ethernet driver" tristate "STMicroelectronics 10/100/1000 Ethernet driver"
depends on HAS_IOMEM && HAS_DMA depends on HAS_IOMEM && HAS_DMA
select NET_CORE
select MII select MII
select PHYLIB select PHYLIB
select CRC32 select CRC32
......
...@@ -21,7 +21,6 @@ config VIA_RHINE ...@@ -21,7 +21,6 @@ config VIA_RHINE
tristate "VIA Rhine support" tristate "VIA Rhine support"
depends on PCI depends on PCI
select CRC32 select CRC32
select NET_CORE
select MII select MII
---help--- ---help---
If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A), If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
...@@ -47,7 +46,6 @@ config VIA_VELOCITY ...@@ -47,7 +46,6 @@ config VIA_VELOCITY
depends on (PCI || USE_OF) depends on (PCI || USE_OF)
select CRC32 select CRC32
select CRC_CCITT select CRC_CCITT
select NET_CORE
select MII select MII
---help--- ---help---
If you have a VIA "Velocity" based network card say Y here. If you have a VIA "Velocity" based network card say Y here.
......
...@@ -67,7 +67,6 @@ config USB_KAWETH ...@@ -67,7 +67,6 @@ config USB_KAWETH
config USB_PEGASUS config USB_PEGASUS
tristate "USB Pegasus/Pegasus-II based ethernet device support" tristate "USB Pegasus/Pegasus-II based ethernet device support"
select NET_CORE
select MII select MII
---help--- ---help---
Say Y here if you know you have Pegasus or Pegasus-II based adapter. Say Y here if you know you have Pegasus or Pegasus-II based adapter.
...@@ -83,7 +82,6 @@ config USB_PEGASUS ...@@ -83,7 +82,6 @@ config USB_PEGASUS
config USB_RTL8150 config USB_RTL8150
tristate "USB RTL8150 based ethernet device support" tristate "USB RTL8150 based ethernet device support"
select NET_CORE
select MII select MII
help help
Say Y here if you have RTL8150 based usb-ethernet adapter. Say Y here if you have RTL8150 based usb-ethernet adapter.
...@@ -95,7 +93,6 @@ config USB_RTL8150 ...@@ -95,7 +93,6 @@ config USB_RTL8150
config USB_RTL8152 config USB_RTL8152
tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters" tristate "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
select NET_CORE
select MII select MII
help help
This option adds support for Realtek RTL8152 based USB 2.0 This option adds support for Realtek RTL8152 based USB 2.0
...@@ -106,7 +103,6 @@ config USB_RTL8152 ...@@ -106,7 +103,6 @@ config USB_RTL8152
config USB_USBNET config USB_USBNET
tristate "Multi-purpose USB Networking Framework" tristate "Multi-purpose USB Networking Framework"
select NET_CORE
select MII select MII
---help--- ---help---
This driver supports several kinds of network links over USB, This driver supports several kinds of network links over USB,
......
...@@ -32,7 +32,6 @@ config BPCTL ...@@ -32,7 +32,6 @@ config BPCTL
depends on PCI && NET depends on PCI && NET
depends on m depends on m
select SBYPASS select SBYPASS
select NET_CORE
select MII select MII
---help--- ---help---
If you have a network (Ethernet) controller of this type, say Y If you have a network (Ethernet) controller of this type, say Y
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册