提交 a129909c 编写于 作者: A Alan Cox 提交者: Linus Torvalds

tty: rocketport uses different port flags to everyone else

Normalise them so we can use the common helpers later on
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 510a3049
......@@ -499,7 +499,7 @@ static void rp_handle_port(struct r_port *info)
if (!info)
return;
if ((info->flags & ROCKET_INITIALIZED) == 0) {
if ((info->flags & ASYNC_INITIALIZED) == 0) {
printk(KERN_WARNING "rp: WARNING: rp_handle_port called with "
"info->flags & NOT_INIT\n");
return;
......@@ -892,11 +892,11 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp))
return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
if (info->flags & ROCKET_CLOSING) {
return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
if (info->flags & ASYNC_CLOSING) {
if (wait_for_completion_interruptible(&info->close_wait))
return -ERESTARTSYS;
return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
}
/*
......@@ -904,7 +904,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
* then make the check up front and then exit.
*/
if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
info->flags |= ROCKET_NORMAL_ACTIVE;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
if (tty->termios->c_cflag & CLOCAL)
......@@ -923,7 +923,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
spin_lock_irqsave(&info->slock, flags);
#ifdef ROCKET_DISABLE_SIMUSAGE
info->flags |= ROCKET_NORMAL_ACTIVE;
info->flags |= ASYNC_NORMAL_ACTIVE;
#else
if (!tty_hung_up_p(filp)) {
extra_count = 1;
......@@ -938,14 +938,14 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
if (tty->termios->c_cflag & CBAUD)
tty_port_raise_dtr_rts(port);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) || !(info->flags & ROCKET_INITIALIZED)) {
if (info->flags & ROCKET_HUP_NOTIFY)
if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) {
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
break;
}
if (!(info->flags & ROCKET_CLOSING) &&
if (!(info->flags & ASYNC_CLOSING) &&
(do_clocal || tty_port_carrier_raised(port)))
break;
if (signal_pending(current)) {
......@@ -975,7 +975,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
#endif
if (retval)
return retval;
info->flags |= ROCKET_NORMAL_ACTIVE;
info->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
......@@ -998,12 +998,12 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
if (!page)
return -ENOMEM;
if (info->flags & ROCKET_CLOSING) {
if (info->flags & ASYNC_CLOSING) {
retval = wait_for_completion_interruptible(&info->close_wait);
free_page(page);
if (retval)
return retval;
return ((info->flags & ROCKET_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
return ((info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN : -ERESTARTSYS);
}
/*
......@@ -1032,7 +1032,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
/*
* Info->count is now 1; so it's safe to sleep now.
*/
if ((info->flags & ROCKET_INITIALIZED) == 0) {
if ((info->flags & ASYNC_INITIALIZED) == 0) {
cp = &info->channel;
sSetRxTrigger(cp, TRIG_1);
if (sGetChanStatus(cp) & CD_ACT)
......@@ -1056,7 +1056,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
sEnRxFIFO(cp);
sEnTransmit(cp);
info->flags |= ROCKET_INITIALIZED;
info->flags |= ASYNC_INITIALIZED;
/*
* Set up the tty->alt_speed kludge
......@@ -1131,7 +1131,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&info->slock, flags);
return;
}
info->flags |= ROCKET_CLOSING;
info->flags |= ASYNC_CLOSING;
spin_unlock_irqrestore(&info->slock, flags);
cp = &info->channel;
......@@ -1151,7 +1151,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
/*
* Wait for the transmit buffer to clear
*/
if (info->port.closing_wait != ROCKET_CLOSING_WAIT_NONE)
if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->port.closing_wait);
/*
* Before we drop DTR, make sure the UART transmitter
......@@ -1192,7 +1192,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
info->xmit_buf = NULL;
}
}
info->flags &= ~(ROCKET_INITIALIZED | ROCKET_CLOSING | ROCKET_NORMAL_ACTIVE);
info->flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
tty->closing = 0;
complete_all(&info->close_wait);
atomic_dec(&rp_num_ports_open);
......@@ -1649,14 +1649,14 @@ static void rp_hangup(struct tty_struct *tty)
printk(KERN_INFO "rp_hangup of ttyR%d...\n", info->line);
#endif
rp_flush_buffer(tty);
if (info->flags & ROCKET_CLOSING)
if (info->flags & ASYNC_CLOSING)
return;
if (info->port.count)
atomic_dec(&rp_num_ports_open);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
info->port.count = 0;
info->flags &= ~ROCKET_NORMAL_ACTIVE;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
info->port.tty = NULL;
cp = &info->channel;
......@@ -1666,7 +1666,7 @@ static void rp_hangup(struct tty_struct *tty)
sDisCTSFlowCtl(cp);
sDisTxSoftFlowCtl(cp);
sClrTxXOFF(cp);
info->flags &= ~ROCKET_INITIALIZED;
info->flags &= ~ASYNC_INITIALIZED;
wake_up_interruptible(&info->port.open_wait);
}
......
......@@ -39,7 +39,7 @@ struct rocket_version {
/*
* Rocketport flags
*/
#define ROCKET_CALLOUT_NOHUP 0x00000001
/*#define ROCKET_CALLOUT_NOHUP 0x00000001 */
#define ROCKET_FORCE_CD 0x00000002
#define ROCKET_HUP_NOTIFY 0x00000004
#define ROCKET_SPLIT_TERMIOS 0x00000008
......
......@@ -1162,11 +1162,6 @@ struct r_port {
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
/* Internal flags used only by the rocketport driver */
#define ROCKET_INITIALIZED 0x80000000 /* Port is active */
#define ROCKET_CLOSING 0x40000000 /* Serial port is closing */
#define ROCKET_NORMAL_ACTIVE 0x20000000 /* Normal port is active */
/*
* Assigned major numbers for the Comtrol Rocketport
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册