提交 a0794fd0 编写于 作者: T Takashi YOSHII 提交者: Paul Mundt

ARM: mach-shmobile: sh73a0 GPIO pullup improvement

On SH-Mobile, Pull UP/Downs can be controlled independently
from Function selectors (by lower nibble of PFCR).
It means people may want to use GPIO_FN_xxx_PU/PD in addition
to GPIO_IN_PU/PD which is currently supported.
This patch adds pull-up version for some input signals on
KEYSC, MMC, FSIA as well as SDHI1.
Signed-off-by: NTakashi YOSHII <takashi.yoshii.zj@renesas.com>
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 019c4ae3
......@@ -441,6 +441,27 @@ enum {
GPIO_FN_RESETA_N_PU_OFF,
GPIO_FN_EDBGREQ_PD,
GPIO_FN_EDBGREQ_PU,
/* Functions with pull-ups */
GPIO_FN_KEYIN0_PU,
GPIO_FN_KEYIN1_PU,
GPIO_FN_KEYIN2_PU,
GPIO_FN_KEYIN3_PU,
GPIO_FN_KEYIN4_PU,
GPIO_FN_KEYIN5_PU,
GPIO_FN_KEYIN6_PU,
GPIO_FN_KEYIN7_PU,
GPIO_FN_SDHID1_0_PU,
GPIO_FN_SDHID1_1_PU,
GPIO_FN_SDHID1_2_PU,
GPIO_FN_SDHID1_3_PU,
GPIO_FN_SDHICMD1_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
GPIO_FN_FSIACK_PU,
GPIO_FN_FSIAILR_PU,
GPIO_FN_FSIAIBT_PU,
GPIO_FN_FSIAISLD_PU,
};
#endif /* __ASM_SH73A0_H__ */
......@@ -479,6 +479,27 @@ enum {
EDBGREQ_PD_MARK,
EDBGREQ_PU_MARK,
/* Functions with pull-ups */
KEYIN0_PU_MARK,
KEYIN1_PU_MARK,
KEYIN2_PU_MARK,
KEYIN3_PU_MARK,
KEYIN4_PU_MARK,
KEYIN5_PU_MARK,
KEYIN6_PU_MARK,
KEYIN7_PU_MARK,
SDHID1_0_PU_MARK,
SDHID1_1_PU_MARK,
SDHID1_2_PU_MARK,
SDHID1_3_PU_MARK,
SDHICMD1_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
FSIAIBT_PU_MARK,
FSIAISLD_PU_MARK,
PINMUX_MARK_END,
};
......@@ -935,26 +956,26 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A20_MARK, PORT66_FN1), \
PINMUX_DATA(KEYIN0_MARK, PORT66_FN2, PORT66_IN_PU), \
PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A21_MARK, PORT67_FN1), \
PINMUX_DATA(KEYIN1_MARK, PORT67_FN2, PORT67_IN_PU), \
PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A22_MARK, PORT68_FN1), \
PINMUX_DATA(KEYIN2_MARK, PORT68_FN2, PORT68_IN_PU), \
PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A23_MARK, PORT69_FN1), \
PINMUX_DATA(KEYIN3_MARK, PORT69_FN2, PORT69_IN_PU), \
PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A24_MARK, PORT70_FN1), \
PINMUX_DATA(KEYIN4_MARK, PORT70_FN2, PORT70_IN_PU), \
PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A25_MARK, PORT71_FN1), \
PINMUX_DATA(KEYIN5_MARK, PORT71_FN2, PORT71_IN_PU), \
PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
PINMUX_DATA(A26_MARK, PORT72_FN1), \
PINMUX_DATA(KEYIN6_MARK, PORT72_FN2, PORT72_IN_PU),
PINMUX_DATA(KEYIN7_MARK, PORT73_FN2, PORT73_IN_PU),
PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
......@@ -1484,6 +1505,31 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
/* Functions with pull-ups */
PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
MSEL4CR_MSEL15_1),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
};
#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
......@@ -2125,6 +2171,27 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(RESETA_N_PU_OFF),
GPIO_FN(EDBGREQ_PD),
GPIO_FN(EDBGREQ_PU),
/* Functions with pull-ups */
GPIO_FN(KEYIN0_PU),
GPIO_FN(KEYIN1_PU),
GPIO_FN(KEYIN2_PU),
GPIO_FN(KEYIN3_PU),
GPIO_FN(KEYIN4_PU),
GPIO_FN(KEYIN5_PU),
GPIO_FN(KEYIN6_PU),
GPIO_FN(KEYIN7_PU),
GPIO_FN(SDHID1_0_PU),
GPIO_FN(SDHID1_1_PU),
GPIO_FN(SDHID1_2_PU),
GPIO_FN(SDHID1_3_PU),
GPIO_FN(SDHICMD1_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
GPIO_FN(FSIACK_PU),
GPIO_FN(FSIAILR_PU),
GPIO_FN(FSIAIBT_PU),
GPIO_FN(FSIAISLD_PU),
};
#define PORTCR(nr, reg) \
......@@ -2663,7 +2730,7 @@ static struct pinmux_info sh73a0_pinmux_info = {
.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
.first_gpio = GPIO_PORT0,
.last_gpio = GPIO_FN_EDBGREQ_PU,
.last_gpio = GPIO_FN_FSIAISLD_PU,
.gpios = pinmux_gpios,
.cfg_regs = pinmux_config_regs,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册