提交 a0685330 编写于 作者: M Michael Grzeschik 提交者: Greg Kroah-Hartman

usb: chipidea: usbmisc: add post handling and errata fix for mx25

This adds a post handling routine which is called after
ci13xxx_add_device was called. The first user is the mx25, which has to
disable the external-vbus-divider after the udc has started.
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
[Alex: also fixed a signed one-bit bitfield a whitespace error and yet
 another set of line-too-long and void pointer casting errors]
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 f0c910b6
......@@ -11,6 +11,7 @@ Optional properties:
that indicate usb controller index
- vbus-supply: regulator for vbus
- disable-over-current: disable over current detect
- external-vbus-divider: enables off-chip resistor divider for Vbus
Examples:
usb@02184000 { /* USB OTG */
......@@ -20,4 +21,5 @@ usb@02184000 { /* USB OTG */
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc 0>;
disable-over-current;
external-vbus-divider;
};
......@@ -79,6 +79,9 @@ int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev)
if (of_find_property(np, "disable-over-current", NULL))
usbdev->disable_oc = 1;
if (of_find_property(np, "external-vbus-divider", NULL))
usbdev->evdo = 1;
return 0;
}
EXPORT_SYMBOL_GPL(usbmisc_get_init_data);
......@@ -202,6 +205,15 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
goto err;
}
if (usbmisc_ops && usbmisc_ops->post) {
ret = usbmisc_ops->post(&pdev->dev);
if (ret) {
dev_err(&pdev->dev,
"usbmisc post failed, ret=%d\n", ret);
goto put_np;
}
}
data->ci_pdev = plat_ci;
platform_set_drvdata(pdev, data);
......
......@@ -13,6 +13,8 @@
struct usbmisc_ops {
/* It's called once when probe a usb device */
int (*init)(struct device *dev);
/* It's called once after adding a usb device */
int (*post)(struct device *dev);
};
struct usbmisc_usb_device {
......@@ -20,6 +22,7 @@ struct usbmisc_usb_device {
int index;
unsigned int disable_oc:1; /* over current detect disabled */
unsigned int evdo:1; /* set external vbus divider option */
};
int usbmisc_set_ops(const struct usbmisc_ops *ops);
......
......@@ -14,11 +14,15 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/delay.h>
#include "ci13xxx_imx.h"
#define USB_DEV_MAX 4
#define MX25_USB_PHY_CTRL_OFFSET 0x08
#define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23)
#define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08
#define MX53_USB_UH2_CTRL_OFFSET 0x14
#define MX53_USB_UH3_CTRL_OFFSET 0x18
......@@ -59,6 +63,30 @@ static struct usbmisc_usb_device *get_usbdev(struct device *dev)
return &usbmisc->usbdev[i];
}
static int usbmisc_imx25_post(struct device *dev)
{
struct usbmisc_usb_device *usbdev;
void __iomem *reg;
unsigned long flags;
u32 val;
usbdev = get_usbdev(dev);
if (IS_ERR(usbdev))
return PTR_ERR(usbdev);
reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
if (usbdev->evdo) {
spin_lock_irqsave(&usbmisc->lock, flags);
val = readl(reg);
writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg);
spin_unlock_irqrestore(&usbmisc->lock, flags);
usleep_range(5000, 10000); /* needed to stabilize voltage */
}
return 0;
}
static int usbmisc_imx53_init(struct device *dev)
{
struct usbmisc_usb_device *usbdev;
......@@ -120,6 +148,10 @@ static int usbmisc_imx6q_init(struct device *dev)
return 0;
}
static const struct usbmisc_ops imx25_usbmisc_ops = {
.post = usbmisc_imx25_post,
};
static const struct usbmisc_ops imx53_usbmisc_ops = {
.init = usbmisc_imx53_init,
};
......@@ -129,6 +161,10 @@ static const struct usbmisc_ops imx6q_usbmisc_ops = {
};
static const struct of_device_id usbmisc_imx_dt_ids[] = {
{
.compatible = "fsl,imx25-usbmisc",
.data = &imx25_usbmisc_ops,
},
{
.compatible = "fsl,imx53-usbmisc",
.data = &imx53_usbmisc_ops,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册