Merge branch 'uprobes/core' of...

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/uprobes

Pull uprobes fixes and changes from Oleg Nesterov:

" Denys found another nasty old bug in uprobes/x86: div, mul, shifts with
  count in CL, and cmpxchg are not handled correctly.

  Plus a couple of other minor fixes. Nobody acked the changes in x86/traps,
  hopefully they are simple enough, and I believe that they make sense anyway
  and allow to do more cleanups."
Signed-off-by: NIngo Molnar <mingo@kernel.org>

arch/x86/include/asm/traps.h

@@ -98,7 +98,6 @@ static inline int get_si_code(unsigned long condition)
 
 extern int panic_on_unrecovered_nmi;
 
-void math_error(struct pt_regs *, int, int);
 void math_emulate(struct math_emu_info *);
 #ifndef CONFIG_X86_32
 asmlinkage void smp_thermal_interrupt(void);

arch/x86/include/asm/uprobes.h

@@ -50,9 +50,6 @@ struct arch_uprobe {
 			u8	opc1;
 		}			branch;
 		struct {
-#ifdef CONFIG_X86_64
-			long	riprel_target;
-#endif
 			u8	fixups;
 			u8	ilen;
 		} 			def;

arch/x86/kernel/traps.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/ptrace.h>
+#include <linux/uprobes.h>
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -136,6 +137,37 @@ do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
 	return -1;
 }
 
+static siginfo_t *fill_trap_info(struct pt_regs *regs, int signr, int trapnr,
+				siginfo_t *info)
+{
+	unsigned long siaddr;
+	int sicode;
+
+	switch (trapnr) {
+	default:
+		return SEND_SIG_PRIV;
+
+	case X86_TRAP_DE:
+		sicode = FPE_INTDIV;
+		siaddr = uprobe_get_trap_addr(regs);
+		break;
+	case X86_TRAP_UD:
+		sicode = ILL_ILLOPN;
+		siaddr = uprobe_get_trap_addr(regs);
+		break;
+	case X86_TRAP_AC:
+		sicode = BUS_ADRALN;
+		siaddr = 0;
+		break;
+	}
+
+	info->si_signo = signr;
+	info->si_errno = 0;
+	info->si_code = sicode;
+	info->si_addr = (void __user *)siaddr;
+	return info;
+}
+
 static void __kprobes
 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
 	long error_code, siginfo_t *info)
@@ -168,60 +200,42 @@ do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
 	}
 #endif
 
-	if (info)
-		force_sig_info(signr, info, tsk);
-	else
-		force_sig(signr, tsk);
+	force_sig_info(signr, info ?: SEND_SIG_PRIV, tsk);
 }
 
-#define DO_ERROR(trapnr, signr, str, name)				\
-dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
-{									\
-	enum ctx_state prev_state;					\
-									\
-	prev_state = exception_enter();					\
-	if (notify_die(DIE_TRAP, str, regs, error_code,			\
-			trapnr, signr) == NOTIFY_STOP) {		\
-		exception_exit(prev_state);				\
-		return;							\
-	}								\
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, NULL);		\
-	exception_exit(prev_state);					\
+static void do_error_trap(struct pt_regs *regs, long error_code, char *str,
+			  unsigned long trapnr, int signr)
+{
+	enum ctx_state prev_state = exception_enter();
+	siginfo_t info;
+
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) !=
+			NOTIFY_STOP) {
+		conditional_sti(regs);
+		do_trap(trapnr, signr, str, regs, error_code,
+			fill_trap_info(regs, signr, trapnr, &info));
+	}
+
+	exception_exit(prev_state);
 }
 
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)		\
+#define DO_ERROR(trapnr, signr, str, name)				\
 dotraplinkage void do_##name(struct pt_regs *regs, long error_code)	\
 {									\
-	siginfo_t info;							\
-	enum ctx_state prev_state;					\
-									\
-	info.si_signo = signr;						\
-	info.si_errno = 0;						\
-	info.si_code = sicode;						\
-	info.si_addr = (void __user *)siaddr;				\
-	prev_state = exception_enter();					\
-	if (notify_die(DIE_TRAP, str, regs, error_code,			\
-			trapnr, signr) == NOTIFY_STOP) {		\
-		exception_exit(prev_state);				\
-		return;							\
-	}								\
-	conditional_sti(regs);						\
-	do_trap(trapnr, signr, str, regs, error_code, &info);		\
-	exception_exit(prev_state);					\
+	do_error_trap(regs, error_code, str, trapnr, signr);		\
 }
 
-DO_ERROR_INFO(X86_TRAP_DE,     SIGFPE,  "divide error",			divide_error,		     FPE_INTDIV, regs->ip )
-DO_ERROR     (X86_TRAP_OF,     SIGSEGV, "overflow",			overflow					  )
-DO_ERROR     (X86_TRAP_BR,     SIGSEGV, "bounds",			bounds						  )
-DO_ERROR_INFO(X86_TRAP_UD,     SIGILL,  "invalid opcode",		invalid_op,		     ILL_ILLOPN, regs->ip )
-DO_ERROR     (X86_TRAP_OLD_MF, SIGFPE,  "coprocessor segment overrun",	coprocessor_segment_overrun			  )
-DO_ERROR     (X86_TRAP_TS,     SIGSEGV, "invalid TSS",			invalid_TSS					  )
-DO_ERROR     (X86_TRAP_NP,     SIGBUS,  "segment not present",		segment_not_present				  )
+DO_ERROR(X86_TRAP_DE,     SIGFPE,  "divide error",		divide_error)
+DO_ERROR(X86_TRAP_OF,     SIGSEGV, "overflow",			overflow)
+DO_ERROR(X86_TRAP_BR,     SIGSEGV, "bounds",			bounds)
+DO_ERROR(X86_TRAP_UD,     SIGILL,  "invalid opcode",		invalid_op)
+DO_ERROR(X86_TRAP_OLD_MF, SIGFPE,  "coprocessor segment overrun",coprocessor_segment_overrun)
+DO_ERROR(X86_TRAP_TS,     SIGSEGV, "invalid TSS",		invalid_TSS)
+DO_ERROR(X86_TRAP_NP,     SIGBUS,  "segment not present",	segment_not_present)
 #ifdef CONFIG_X86_32
-DO_ERROR     (X86_TRAP_SS,     SIGBUS,  "stack segment",		stack_segment					  )
+DO_ERROR(X86_TRAP_SS,     SIGBUS,  "stack segment",		stack_segment)
 #endif
-DO_ERROR_INFO(X86_TRAP_AC,     SIGBUS,  "alignment check",		alignment_check,	     BUS_ADRALN, 0	  )
+DO_ERROR(X86_TRAP_AC,     SIGBUS,  "alignment check",		alignment_check)
 
 #ifdef CONFIG_X86_64
 /* Runs on IST stack */
@@ -305,7 +319,7 @@ do_general_protection(struct pt_regs *regs, long error_code)
 		pr_cont("\n");
 	}
 
-	force_sig(SIGSEGV, tsk);
+	force_sig_info(SIGSEGV, SEND_SIG_PRIV, tsk);
 exit:
 	exception_exit(prev_state);
 }
@@ -488,7 +502,7 @@ dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
  * the correct behaviour even in the presence of the asynchronous
  * IRQ13 behaviour
  */
-void math_error(struct pt_regs *regs, int error_code, int trapnr)
+static void math_error(struct pt_regs *regs, int error_code, int trapnr)
 {
 	struct task_struct *task = current;
 	siginfo_t info;
@@ -518,7 +532,7 @@ void math_error(struct pt_regs *regs, int error_code, int trapnr)
 	task->thread.error_code = error_code;
 	info.si_signo = SIGFPE;
 	info.si_errno = 0;
-	info.si_addr = (void __user *)regs->ip;
+	info.si_addr = (void __user *)uprobe_get_trap_addr(regs);
 	if (trapnr == X86_TRAP_MF) {
 		unsigned short cwd, swd;
 		/*
@@ -645,7 +659,7 @@ void math_state_restore(void)
 	 */
 	if (unlikely(restore_fpu_checking(tsk))) {
 		drop_init_fpu(tsk);
-		force_sig(SIGSEGV, tsk);
+		force_sig_info(SIGSEGV, SEND_SIG_PRIV, tsk);
 		return;
 	}
 

arch/x86/kernel/uprobes.c

@@ -41,8 +41,11 @@
 /* Instruction will modify TF, don't change it */
 #define UPROBE_FIX_SETF		0x04
 
-#define UPROBE_FIX_RIP_AX	0x08
-#define UPROBE_FIX_RIP_CX	0x10
+#define UPROBE_FIX_RIP_SI	0x08
+#define UPROBE_FIX_RIP_DI	0x10
+#define UPROBE_FIX_RIP_BX	0x20
+#define UPROBE_FIX_RIP_MASK	\
+	(UPROBE_FIX_RIP_SI | UPROBE_FIX_RIP_DI | UPROBE_FIX_RIP_BX)
 
 #define	UPROBE_TRAP_NR		UINT_MAX
 
@@ -251,9 +254,9 @@ static inline bool is_64bit_mm(struct mm_struct *mm)
  * If arch_uprobe->insn doesn't use rip-relative addressing, return
  * immediately.  Otherwise, rewrite the instruction so that it accesses
  * its memory operand indirectly through a scratch register.  Set
- * def->fixups and def->riprel_target accordingly. (The contents of the
- * scratch register will be saved before we single-step the modified
- * instruction, and restored afterward).
+ * def->fixups accordingly. (The contents of the scratch register
+ * will be saved before we single-step the modified instruction,
+ * and restored afterward).
  *
  * We do this because a rip-relative instruction can access only a
  * relatively small area (+/- 2 GB from the instruction), and the XOL
@@ -264,28 +267,120 @@ static inline bool is_64bit_mm(struct mm_struct *mm)
  *
  * Some useful facts about rip-relative instructions:
  *
- *  - There's always a modrm byte.
+ *  - There's always a modrm byte with bit layout "00 reg 101".
  *  - There's never a SIB byte.
  *  - The displacement is always 4 bytes.
+ *  - REX.B=1 bit in REX prefix, which normally extends r/m field,
+ *    has no effect on rip-relative mode. It doesn't make modrm byte
+ *    with r/m=101 refer to register 1101 = R13.
  */
 static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
 {
 	u8 *cursor;
 	u8 reg;
+	u8 reg2;
 
 	if (!insn_rip_relative(insn))
 		return;
 
 	/*
-	 * insn_rip_relative() would have decoded rex_prefix, modrm.
+	 * insn_rip_relative() would have decoded rex_prefix, vex_prefix, modrm.
 	 * Clear REX.b bit (extension of MODRM.rm field):
-	 * we want to encode rax/rcx, not r8/r9.
+	 * we want to encode low numbered reg, not r8+.
 	 */
 	if (insn->rex_prefix.nbytes) {
 		cursor = auprobe->insn + insn_offset_rex_prefix(insn);
-		*cursor &= 0xfe;	/* Clearing REX.B bit */
+		/* REX byte has 0100wrxb layout, clearing REX.b bit */
+		*cursor &= 0xfe;
 	}
+	/*
+	 * Similar treatment for VEX3 prefix.
+	 * TODO: add XOP/EVEX treatment when insn decoder supports them
+	 */
+	if (insn->vex_prefix.nbytes == 3) {
+		/*
+		 * vex2:     c5    rvvvvLpp   (has no b bit)
+		 * vex3/xop: c4/8f rxbmmmmm wvvvvLpp
+		 * evex:     62    rxbR00mm wvvvv1pp zllBVaaa
+		 *   (evex will need setting of both b and x since
+		 *   in non-sib encoding evex.x is 4th bit of MODRM.rm)
+		 * Setting VEX3.b (setting because it has inverted meaning):
+		 */
+		cursor = auprobe->insn + insn_offset_vex_prefix(insn) + 1;
+		*cursor |= 0x20;
+	}
+
+	/*
+	 * Convert from rip-relative addressing to register-relative addressing
+	 * via a scratch register.
+	 *
+	 * This is tricky since there are insns with modrm byte
+	 * which also use registers not encoded in modrm byte:
+	 * [i]div/[i]mul: implicitly use dx:ax
+	 * shift ops: implicitly use cx
+	 * cmpxchg: implicitly uses ax
+	 * cmpxchg8/16b: implicitly uses dx:ax and bx:cx
+	 *   Encoding: 0f c7/1 modrm
+	 *   The code below thinks that reg=1 (cx), chooses si as scratch.
+	 * mulx: implicitly uses dx: mulx r/m,r1,r2 does r1:r2 = dx * r/m.
+	 *   First appeared in Haswell (BMI2 insn). It is vex-encoded.
+	 *   Example where none of bx,cx,dx can be used as scratch reg:
+	 *   c4 e2 63 f6 0d disp32   mulx disp32(%rip),%ebx,%ecx
+	 * [v]pcmpistri: implicitly uses cx, xmm0
+	 * [v]pcmpistrm: implicitly uses xmm0
+	 * [v]pcmpestri: implicitly uses ax, dx, cx, xmm0
+	 * [v]pcmpestrm: implicitly uses ax, dx, xmm0
+	 *   Evil SSE4.2 string comparison ops from hell.
+	 * maskmovq/[v]maskmovdqu: implicitly uses (ds:rdi) as destination.
+	 *   Encoding: 0f f7 modrm, 66 0f f7 modrm, vex-encoded: c5 f9 f7 modrm.
+	 *   Store op1, byte-masked by op2 msb's in each byte, to (ds:rdi).
+	 *   AMD says it has no 3-operand form (vex.vvvv must be 1111)
+	 *   and that it can have only register operands, not mem
+	 *   (its modrm byte must have mode=11).
+	 *   If these restrictions will ever be lifted,
+	 *   we'll need code to prevent selection of di as scratch reg!
+	 *
+	 * Summary: I don't know any insns with modrm byte which
+	 * use SI register implicitly. DI register is used only
+	 * by one insn (maskmovq) and BX register is used
+	 * only by one too (cmpxchg8b).
+	 * BP is stack-segment based (may be a problem?).
+	 * AX, DX, CX are off-limits (many implicit users).
+	 * SP is unusable (it's stack pointer - think about "pop mem";
+	 * also, rsp+disp32 needs sib encoding -> insn length change).
+	 */
 
+	reg = MODRM_REG(insn);	/* Fetch modrm.reg */
+	reg2 = 0xff;		/* Fetch vex.vvvv */
+	if (insn->vex_prefix.nbytes == 2)
+		reg2 = insn->vex_prefix.bytes[1];
+	else if (insn->vex_prefix.nbytes == 3)
+		reg2 = insn->vex_prefix.bytes[2];
+	/*
+	 * TODO: add XOP, EXEV vvvv reading.
+	 *
+	 * vex.vvvv field is in bits 6-3, bits are inverted.
+	 * But in 32-bit mode, high-order bit may be ignored.
+	 * Therefore, let's consider only 3 low-order bits.
+	 */
+	reg2 = ((reg2 >> 3) & 0x7) ^ 0x7;
+	/*
+	 * Register numbering is ax,cx,dx,bx, sp,bp,si,di, r8..r15.
+	 *
+	 * Choose scratch reg. Order is important: must not select bx
+	 * if we can use si (cmpxchg8b case!)
+	 */
+	if (reg != 6 && reg2 != 6) {
+		reg2 = 6;
+		auprobe->def.fixups |= UPROBE_FIX_RIP_SI;
+	} else if (reg != 7 && reg2 != 7) {
+		reg2 = 7;
+		auprobe->def.fixups |= UPROBE_FIX_RIP_DI;
+		/* TODO (paranoia): force maskmovq to not use di */
+	} else {
+		reg2 = 3;
+		auprobe->def.fixups |= UPROBE_FIX_RIP_BX;
+	}
 	/*
 	 * Point cursor at the modrm byte.  The next 4 bytes are the
 	 * displacement.  Beyond the displacement, for some instructions,
@@ -293,43 +388,21 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
 	 */
 	cursor = auprobe->insn + insn_offset_modrm(insn);
 	/*
-	 * Convert from rip-relative addressing to indirect addressing
-	 * via a scratch register.  Change the r/m field from 0x5 (%rip)
-	 * to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
+	 * Change modrm from "00 reg 101" to "10 reg reg2". Example:
+	 * 89 05 disp32  mov %eax,disp32(%rip) becomes
+	 * 89 86 disp32  mov %eax,disp32(%rsi)
 	 */
-	reg = MODRM_REG(insn);
-	if (reg == 0) {
-		/*
-		 * The register operand (if any) is either the A register
-		 * (%rax, %eax, etc.) or (if the 0x4 bit is set in the
-		 * REX prefix) %r8.  In any case, we know the C register
-		 * is NOT the register operand, so we use %rcx (register
-		 * #1) for the scratch register.
-		 */
-		auprobe->def.fixups |= UPROBE_FIX_RIP_CX;
-		/* Change modrm from 00 000 101 to 00 000 001. */
-		*cursor = 0x1;
-	} else {
-		/* Use %rax (register #0) for the scratch register. */
-		auprobe->def.fixups |= UPROBE_FIX_RIP_AX;
-		/* Change modrm from 00 xxx 101 to 00 xxx 000 */
-		*cursor = (reg << 3);
-	}
-
-	/* Target address = address of next instruction + (signed) offset */
-	auprobe->def.riprel_target = (long)insn->length + insn->displacement.value;
-
-	/* Displacement field is gone; slide immediate field (if any) over. */
-	if (insn->immediate.nbytes) {
-		cursor++;
-		memmove(cursor, cursor + insn->displacement.nbytes, insn->immediate.nbytes);
-	}
+	*cursor = 0x80 | (reg << 3) | reg2;
 }
 
 static inline unsigned long *
 scratch_reg(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
-	return (auprobe->def.fixups & UPROBE_FIX_RIP_AX) ? &regs->ax : &regs->cx;
+	if (auprobe->def.fixups & UPROBE_FIX_RIP_SI)
+		return &regs->si;
+	if (auprobe->def.fixups & UPROBE_FIX_RIP_DI)
+		return &regs->di;
+	return &regs->bx;
 }
 
 /*
@@ -338,31 +411,22 @@ scratch_reg(struct arch_uprobe *auprobe, struct pt_regs *regs)
  */
 static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
-	if (auprobe->def.fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) {
+	if (auprobe->def.fixups & UPROBE_FIX_RIP_MASK) {
 		struct uprobe_task *utask = current->utask;
 		unsigned long *sr = scratch_reg(auprobe, regs);
 
 		utask->autask.saved_scratch_register = *sr;
-		*sr = utask->vaddr + auprobe->def.riprel_target;
+		*sr = utask->vaddr + auprobe->def.ilen;
 	}
 }
 
-static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs,
-				long *correction)
+static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
-	if (auprobe->def.fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) {
+	if (auprobe->def.fixups & UPROBE_FIX_RIP_MASK) {
 		struct uprobe_task *utask = current->utask;
 		unsigned long *sr = scratch_reg(auprobe, regs);
 
 		*sr = utask->autask.saved_scratch_register;
-		/*
-		 * The original instruction includes a displacement, and so
-		 * is 4 bytes longer than what we've just single-stepped.
-		 * Caller may need to apply other fixups to handle stuff
-		 * like "jmpq *...(%rip)" and "callq *...(%rip)".
-		 */
-		if (correction)
-			*correction += 4;
 	}
 }
 #else /* 32-bit: */
@@ -379,8 +443,7 @@ static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
 static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 }
-static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs,
-					long *correction)
+static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 }
 #endif /* CONFIG_X86_64 */
@@ -414,13 +477,30 @@ static int push_ret_address(struct pt_regs *regs, unsigned long ip)
 	return 0;
 }
 
+/*
+ * We have to fix things up as follows:
+ *
+ * Typically, the new ip is relative to the copied instruction.  We need
+ * to make it relative to the original instruction (FIX_IP).  Exceptions
+ * are return instructions and absolute or indirect jump or call instructions.
+ *
+ * If the single-stepped instruction was a call, the return address that
+ * is atop the stack is the address following the copied instruction.  We
+ * need to make it the address following the original instruction (FIX_CALL).
+ *
+ * If the original instruction was a rip-relative instruction such as
+ * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
+ * instruction using a scratch register -- e.g., "movl %edx,0xnnnn(%rsi)".
+ * We need to restore the contents of the scratch register
+ * (FIX_RIP_reg).
+ */
 static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 	struct uprobe_task *utask = current->utask;
-	long correction = (long)(utask->vaddr - utask->xol_vaddr);
 
-	riprel_post_xol(auprobe, regs, &correction);
+	riprel_post_xol(auprobe, regs);
 	if (auprobe->def.fixups & UPROBE_FIX_IP) {
+		long correction = utask->vaddr - utask->xol_vaddr;
 		regs->ip += correction;
 	} else if (auprobe->def.fixups & UPROBE_FIX_CALL) {
 		regs->sp += sizeof_long();
@@ -436,7 +516,7 @@ static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs
 
 static void default_abort_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
-	riprel_post_xol(auprobe, regs, NULL);
+	riprel_post_xol(auprobe, regs);
 }
 
 static struct uprobe_xol_ops default_xol_ops = {
@@ -720,23 +800,6 @@ bool arch_uprobe_xol_was_trapped(struct task_struct *t)
  * single-step, we single-stepped a copy of the instruction.
  *
  * This function prepares to resume execution after the single-step.
- * We have to fix things up as follows:
- *
- * Typically, the new ip is relative to the copied instruction.  We need
- * to make it relative to the original instruction (FIX_IP).  Exceptions
- * are return instructions and absolute or indirect jump or call instructions.
- *
- * If the single-stepped instruction was a call, the return address that
- * is atop the stack is the address following the copied instruction.  We
- * need to make it the address following the original instruction (FIX_CALL).
- *
- * If the original instruction was a rip-relative instruction such as
- * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
- * instruction using a scratch register -- e.g., "movl %edx,(%rax)".
- * We need to restore the contents of the scratch register and adjust
- * the ip, keeping in mind that the instruction we executed is 4 bytes
- * shorter than the original instruction (since we squeezed out the offset
- * field).  (FIX_RIP_AX or FIX_RIP_CX)
  */
 int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {

include/linux/uprobes.h

@@ -102,6 +102,7 @@ extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, u
 extern bool __weak is_swbp_insn(uprobe_opcode_t *insn);
 extern bool __weak is_trap_insn(uprobe_opcode_t *insn);
 extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs);
+extern unsigned long uprobe_get_trap_addr(struct pt_regs *regs);
 extern int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t);
 extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
 extern int uprobe_apply(struct inode *inode, loff_t offset, struct uprobe_consumer *uc, bool);
@@ -130,6 +131,9 @@ extern bool __weak arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *r
 #else /* !CONFIG_UPROBES */
 struct uprobes_state {
 };
+
+#define uprobe_get_trap_addr(regs)	instruction_pointer(regs)
+
 static inline int
 uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc)
 {

kernel/events/uprobes.c

@@ -279,18 +279,13 @@ static int verify_opcode(struct page *page, unsigned long vaddr, uprobe_opcode_t
  * supported by that architecture then we need to modify is_trap_at_addr and
  * uprobe_write_opcode accordingly. This would never be a problem for archs
  * that have fixed length instructions.
- */
-
-/*
+ *
  * uprobe_write_opcode - write the opcode at a given virtual address.
  * @mm: the probed process address space.
  * @vaddr: the virtual address to store the opcode.
  * @opcode: opcode to be written at @vaddr.
  *
- * Called with mm->mmap_sem held (for read and with a reference to
- * mm).
- *
- * For mm @mm, write the opcode at @vaddr.
+ * Called with mm->mmap_sem held for write.
  * Return 0 (success) or a negative errno.
  */
 int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr,
@@ -310,21 +305,25 @@ int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr,
 	if (ret <= 0)
 		goto put_old;
 
+	ret = anon_vma_prepare(vma);
+	if (ret)
+		goto put_old;
+
 	ret = -ENOMEM;
 	new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, vaddr);
 	if (!new_page)
 		goto put_old;
 
-	__SetPageUptodate(new_page);
+	if (mem_cgroup_charge_anon(new_page, mm, GFP_KERNEL))
+		goto put_new;
 
+	__SetPageUptodate(new_page);
 	copy_highpage(new_page, old_page);
 	copy_to_page(new_page, vaddr, &opcode, UPROBE_SWBP_INSN_SIZE);
 
-	ret = anon_vma_prepare(vma);
-	if (ret)
-		goto put_new;
-
 	ret = __replace_page(vma, vaddr, old_page, new_page);
+	if (ret)
+		mem_cgroup_uncharge_page(new_page);
 
 put_new:
 	page_cache_release(new_page);
@@ -1352,6 +1351,16 @@ unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs)
 	return instruction_pointer(regs) - UPROBE_SWBP_INSN_SIZE;
 }
 
+unsigned long uprobe_get_trap_addr(struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	if (unlikely(utask && utask->active_uprobe))
+		return utask->vaddr;
+
+	return instruction_pointer(regs);
+}
+
 /*
  * Called with no locks held.
  * Called in context of a exiting or a exec-ing thread.