提交 a02fa397 编写于 作者: A Alex Deucher 提交者: Dave Airlie

drm/radeon/kms: reorganize pm callbacks

tidy up the radeon_asic struct.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
上级 0f9e006c
......@@ -1199,11 +1199,13 @@ struct radeon_asic {
void (*ioctl_wait_idle)(struct radeon_device *rdev, struct radeon_bo *bo);
bool (*gui_idle)(struct radeon_device *rdev);
/* power management */
void (*pm_misc)(struct radeon_device *rdev);
void (*pm_prepare)(struct radeon_device *rdev);
void (*pm_finish)(struct radeon_device *rdev);
void (*pm_init_profile)(struct radeon_device *rdev);
void (*pm_get_dynpm_state)(struct radeon_device *rdev);
struct {
void (*misc)(struct radeon_device *rdev);
void (*prepare)(struct radeon_device *rdev);
void (*finish)(struct radeon_device *rdev);
void (*init_profile)(struct radeon_device *rdev);
void (*get_dynpm_state)(struct radeon_device *rdev);
} pm;
/* pageflipping */
struct {
void (*pre_page_flip)(struct radeon_device *rdev, int crtc);
......@@ -1694,11 +1696,11 @@ void radeon_ring_write(struct radeon_ring *ring, uint32_t v);
#define radeon_hpd_sense(rdev, h) (rdev)->asic->hpd.sense((rdev), (h))
#define radeon_hpd_set_polarity(rdev, h) (rdev)->asic->hpd.set_polarity((rdev), (h))
#define radeon_gui_idle(rdev) (rdev)->asic->gui_idle((rdev))
#define radeon_pm_misc(rdev) (rdev)->asic->pm_misc((rdev))
#define radeon_pm_prepare(rdev) (rdev)->asic->pm_prepare((rdev))
#define radeon_pm_finish(rdev) (rdev)->asic->pm_finish((rdev))
#define radeon_pm_init_profile(rdev) (rdev)->asic->pm_init_profile((rdev))
#define radeon_pm_get_dynpm_state(rdev) (rdev)->asic->pm_get_dynpm_state((rdev))
#define radeon_pm_misc(rdev) (rdev)->asic->pm.misc((rdev))
#define radeon_pm_prepare(rdev) (rdev)->asic->pm.prepare((rdev))
#define radeon_pm_finish(rdev) (rdev)->asic->pm.finish((rdev))
#define radeon_pm_init_profile(rdev) (rdev)->asic->pm.init_profile((rdev))
#define radeon_pm_get_dynpm_state(rdev) (rdev)->asic->pm.get_dynpm_state((rdev))
#define radeon_pre_page_flip(rdev, crtc) rdev->asic->pflip.pre_page_flip((rdev), (crtc))
#define radeon_page_flip(rdev, crtc, base) rdev->asic->pflip.page_flip((rdev), (crtc), (base))
#define radeon_post_page_flip(rdev, crtc) rdev->asic->pflip.post_page_flip((rdev), (crtc))
......
......@@ -172,11 +172,13 @@ static struct radeon_asic r100_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r100_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r100_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -229,11 +231,13 @@ static struct radeon_asic r200_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r100_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r100_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -287,11 +291,13 @@ static struct radeon_asic r300_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r100_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r100_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -344,11 +350,13 @@ static struct radeon_asic r300_asic_pcie = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r100_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r100_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -402,11 +410,13 @@ static struct radeon_asic r420_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r420_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r420_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -460,11 +470,13 @@ static struct radeon_asic rs400_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &r100_pm_misc,
.pm_prepare = &r100_pm_prepare,
.pm_finish = &r100_pm_finish,
.pm_init_profile = &r100_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &r100_pm_misc,
.prepare = &r100_pm_prepare,
.finish = &r100_pm_finish,
.init_profile = &r100_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &r100_pre_page_flip,
.page_flip = &r100_page_flip,
......@@ -518,11 +530,13 @@ static struct radeon_asic rs600_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &rs600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r420_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &rs600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r420_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -576,11 +590,13 @@ static struct radeon_asic rs690_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &rs600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r420_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &rs600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r420_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -634,11 +650,13 @@ static struct radeon_asic rv515_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &rs600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r420_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &rs600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r420_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -692,11 +710,13 @@ static struct radeon_asic r520_asic = {
},
.ioctl_wait_idle = NULL,
.gui_idle = &r100_gui_idle,
.pm_misc = &rs600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r420_pm_init_profile,
.pm_get_dynpm_state = &r100_pm_get_dynpm_state,
.pm = {
.misc = &rs600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r420_pm_init_profile,
.get_dynpm_state = &r100_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -749,11 +769,13 @@ static struct radeon_asic r600_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &r600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r600_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &r600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -806,11 +828,13 @@ static struct radeon_asic rs780_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &r600_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &rs780_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &r600_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &rs780_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rs600_page_flip,
......@@ -863,11 +887,13 @@ static struct radeon_asic rv770_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &rv770_pm_misc,
.pm_prepare = &rs600_pm_prepare,
.pm_finish = &rs600_pm_finish,
.pm_init_profile = &r600_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &rv770_pm_misc,
.prepare = &rs600_pm_prepare,
.finish = &rs600_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &rs600_pre_page_flip,
.page_flip = &rv770_page_flip,
......@@ -920,11 +946,13 @@ static struct radeon_asic evergreen_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
.pm_init_profile = &r600_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &evergreen_pm_misc,
.prepare = &evergreen_pm_prepare,
.finish = &evergreen_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
......@@ -977,11 +1005,13 @@ static struct radeon_asic sumo_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
.pm_init_profile = &sumo_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &evergreen_pm_misc,
.prepare = &evergreen_pm_prepare,
.finish = &evergreen_pm_finish,
.init_profile = &sumo_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
......@@ -1034,11 +1064,13 @@ static struct radeon_asic btc_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
.pm_init_profile = &r600_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &evergreen_pm_misc,
.prepare = &evergreen_pm_prepare,
.finish = &evergreen_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
......@@ -1114,11 +1146,13 @@ static struct radeon_asic cayman_asic = {
},
.ioctl_wait_idle = r600_ioctl_wait_idle,
.gui_idle = &r600_gui_idle,
.pm_misc = &evergreen_pm_misc,
.pm_prepare = &evergreen_pm_prepare,
.pm_finish = &evergreen_pm_finish,
.pm_init_profile = &r600_pm_init_profile,
.pm_get_dynpm_state = &r600_pm_get_dynpm_state,
.pm = {
.misc = &evergreen_pm_misc,
.prepare = &evergreen_pm_prepare,
.finish = &evergreen_pm_finish,
.init_profile = &r600_pm_init_profile,
.get_dynpm_state = &r600_pm_get_dynpm_state,
},
.pflip = {
.pre_page_flip = &evergreen_pre_page_flip,
.page_flip = &evergreen_page_flip,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册