提交 9f82c778 编写于 作者: Á Álvaro Fernández Rojas 提交者: Jacek Anaszewski

leds-bcm6328: add more init configuration options

This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com>
上级 d8fe1606
......@@ -41,6 +41,11 @@
#define BCM6328_SERIAL_LED_SHIFT_DIR BIT(16)
#define BCM6328_LED_SHIFT_TEST BIT(30)
#define BCM6328_LED_TEST BIT(31)
#define BCM6328_INIT_MASK (BCM6328_SERIAL_LED_EN | \
BCM6328_SERIAL_LED_MUX | \
BCM6328_SERIAL_LED_CLK_NPOL | \
BCM6328_SERIAL_LED_DATA_PPOL | \
BCM6328_SERIAL_LED_SHIFT_DIR)
#define BCM6328_LED_MODE_MASK 3
#define BCM6328_LED_MODE_OFF 0
......@@ -366,9 +371,17 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
val = bcm6328_led_read(mem + BCM6328_REG_INIT);
val &= ~BCM6328_SERIAL_LED_EN;
val &= ~(BCM6328_INIT_MASK);
if (of_property_read_bool(np, "brcm,serial-leds"))
val |= BCM6328_SERIAL_LED_EN;
if (of_property_read_bool(np, "brcm,serial-mux"))
val |= BCM6328_SERIAL_LED_MUX;
if (of_property_read_bool(np, "brcm,serial-clk-low"))
val |= BCM6328_SERIAL_LED_CLK_NPOL;
if (!of_property_read_bool(np, "brcm,serial-dat-low"))
val |= BCM6328_SERIAL_LED_DATA_PPOL;
if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
val |= BCM6328_SERIAL_LED_SHIFT_DIR;
bcm6328_led_write(mem + BCM6328_REG_INIT, val);
for_each_available_child_of_node(np, child) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册