提交 9f73bd8b 编写于 作者: R Russell King 提交者: Russell King

ARM: uaccess: remove put_user() code duplication

Remove the code duplication between put_user() and __put_user().  The
code which selected the implementation based upon the pointer size, and
declared the local variable to hold the value to be put are common to
both implementations.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 9f85eae6
......@@ -230,49 +230,23 @@ extern int __put_user_2(void *, unsigned int);
extern int __put_user_4(void *, unsigned int);
extern int __put_user_8(void *, unsigned long long);
#define __put_user_x(__r2, __p, __e, __l, __s) \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
__asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc")
#define __put_user_check(x, p) \
#define __put_user_check(__pu_val, __ptr, __err, __s) \
({ \
unsigned long __limit = current_thread_info()->addr_limit - 1; \
const typeof(*(p)) __user *__tmp_p = (p); \
register const typeof(*(p)) __r2 asm("r2") = (x); \
register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
register typeof(__pu_val) __r2 asm("r2") = __pu_val; \
register const void __user *__p asm("r0") = __ptr; \
register unsigned long __l asm("r1") = __limit; \
register int __e asm("r0"); \
unsigned int __ua_flags = uaccess_save_and_enable(); \
switch (sizeof(*(__p))) { \
case 1: \
__put_user_x(__r2, __p, __e, __l, 1); \
break; \
case 2: \
__put_user_x(__r2, __p, __e, __l, 2); \
break; \
case 4: \
__put_user_x(__r2, __p, __e, __l, 4); \
break; \
case 8: \
__put_user_x(__r2, __p, __e, __l, 8); \
break; \
default: __e = __put_user_bad(); break; \
} \
uaccess_restore(__ua_flags); \
__e; \
__asm__ __volatile__ ( \
__asmeq("%0", "r0") __asmeq("%2", "r2") \
__asmeq("%3", "r1") \
"bl __put_user_" #__s \
: "=&r" (__e) \
: "0" (__p), "r" (__r2), "r" (__l) \
: "ip", "lr", "cc"); \
__err = __e; \
})
#define put_user(x, p) \
({ \
might_fault(); \
__put_user_check(x, p); \
})
#else /* CONFIG_MMU */
/*
......@@ -290,7 +264,7 @@ static inline void set_fs(mm_segment_t fs)
}
#define get_user(x, p) __get_user(x, p)
#define put_user(x, p) __put_user(x, p)
#define __put_user_check __put_user_nocheck
#endif /* CONFIG_MMU */
......@@ -381,36 +355,54 @@ do { \
#define __get_user_asm_word(x, addr, err) \
__get_user_asm(x, addr, err, ldr)
#define __put_user_switch(x, ptr, __err, __fn) \
do { \
const __typeof__(*(ptr)) __user *__pu_ptr = (ptr); \
__typeof__(*(ptr)) __pu_val = (x); \
unsigned int __ua_flags; \
might_fault(); \
__ua_flags = uaccess_save_and_enable(); \
switch (sizeof(*(ptr))) { \
case 1: __fn(__pu_val, __pu_ptr, __err, 1); break; \
case 2: __fn(__pu_val, __pu_ptr, __err, 2); break; \
case 4: __fn(__pu_val, __pu_ptr, __err, 4); break; \
case 8: __fn(__pu_val, __pu_ptr, __err, 8); break; \
default: __err = __put_user_bad(); break; \
} \
uaccess_restore(__ua_flags); \
} while (0)
#define put_user(x, ptr) \
({ \
int __pu_err = 0; \
__put_user_switch((x), (ptr), __pu_err, __put_user_check); \
__pu_err; \
})
#define __put_user(x, ptr) \
({ \
long __pu_err = 0; \
__put_user_err((x), (ptr), __pu_err); \
__put_user_switch((x), (ptr), __pu_err, __put_user_nocheck); \
__pu_err; \
})
#define __put_user_error(x, ptr, err) \
({ \
__put_user_err((x), (ptr), err); \
__put_user_switch((x), (ptr), (err), __put_user_nocheck); \
(void) 0; \
})
#define __put_user_err(x, ptr, err) \
do { \
unsigned long __pu_addr = (unsigned long)(ptr); \
unsigned int __ua_flags; \
__typeof__(*(ptr)) __pu_val = (x); \
__chk_user_ptr(ptr); \
might_fault(); \
__ua_flags = uaccess_save_and_enable(); \
switch (sizeof(*(ptr))) { \
case 1: __put_user_asm_byte(__pu_val, __pu_addr, err); break; \
case 2: __put_user_asm_half(__pu_val, __pu_addr, err); break; \
case 4: __put_user_asm_word(__pu_val, __pu_addr, err); break; \
case 8: __put_user_asm_dword(__pu_val, __pu_addr, err); break; \
default: __put_user_bad(); \
} \
uaccess_restore(__ua_flags); \
} while (0)
#define __put_user_nocheck(x, __pu_ptr, __err, __size) \
do { \
unsigned long __pu_addr = (unsigned long)__pu_ptr; \
__put_user_nocheck_##__size(x, __pu_addr, __err); \
} while (0)
#define __put_user_nocheck_1 __put_user_asm_byte
#define __put_user_nocheck_2 __put_user_asm_half
#define __put_user_nocheck_4 __put_user_asm_word
#define __put_user_nocheck_8 __put_user_asm_dword
#define __put_user_asm(x, __pu_addr, err, instr) \
__asm__ __volatile__( \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册