提交 9f6ac785 编写于 作者: L Linus Torvalds

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (13039): dib0700: not building CONFIG_DVB_TUNER_DIB0070 breaks compilation
  V4L/DVB (13038): dvbdev: Remove an anoying/uneeded warning
  V4L/DVB (13037): go7007: Revert compatibility code added at the wrong place
  media: video: Fix build in saa7164
......@@ -31,10 +31,9 @@
#define DVB_MAJOR 212
#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
#else
#warning invalid CONFIG_DVB_MAX_ADAPTERS value
#define DVB_MAX_ADAPTERS 8
#define DVB_MAX_ADAPTERS 8
#endif
#define DVB_UNSET (-1)
......
......@@ -75,7 +75,7 @@ config DVB_USB_DIB0700
select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
......
......@@ -415,7 +415,7 @@ int saa7164_api_enum_subdevs(struct saa7164_dev *dev)
goto out;
}
if (debug & DBGLVL_API)
if (saa_debug & DBGLVL_API)
saa7164_dumphex16(dev, buf, (buflen/16)*16);
saa7164_api_dump_subdevs(dev, buf, buflen);
......@@ -480,7 +480,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
if (debug & DBGLVL_I2C)
if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, 2 * 16);
ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
......@@ -488,7 +488,7 @@ int saa7164_api_i2c_read(struct saa7164_i2c *bus, u8 addr, u32 reglen, u8 *reg,
if (ret != SAA_OK)
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
else {
if (debug & DBGLVL_I2C)
if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
}
......@@ -548,7 +548,7 @@ int saa7164_api_i2c_write(struct saa7164_i2c *bus, u8 addr, u32 datalen,
*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
memcpy((buf + 2 * sizeof(u32)), data, datalen);
if (debug & DBGLVL_I2C)
if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
......
......@@ -250,7 +250,7 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
unsigned long stamp;
int r;
if (debug >= 4)
if (saa_debug >= 4)
saa7164_bus_dump(dev);
dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
......
......@@ -45,8 +45,8 @@ MODULE_LICENSE("GPL");
32 bus
*/
unsigned int debug;
module_param(debug, int, 0644);
unsigned int saa_debug;
module_param_named(debug, saa_debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
unsigned int waitsecs = 10;
......@@ -653,7 +653,7 @@ static int __devinit saa7164_initdev(struct pci_dev *pci_dev,
printk(KERN_ERR "%s() Unsupported board detected, "
"registering without firmware\n", __func__);
dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
fail_fw:
......
......@@ -375,9 +375,9 @@ extern int saa7164_buffer_dealloc(struct saa7164_tsport *port,
/* ----------------------------------------------------------- */
extern unsigned int debug;
extern unsigned int saa_debug;
#define dprintk(level, fmt, arg...)\
do { if (debug & level)\
do { if (saa_debug & level)\
printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
......
......@@ -32,8 +32,3 @@ endif
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
# Ubuntu 8.04 has CONFIG_SND undefined, so include lum sound/config.h too
ifeq ($(CONFIG_SND),)
EXTRA_CFLAGS += -include sound/config.h
endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册