提交 9eb7aa89 编写于 作者: M Marc Kleine-Budde

can: flexcan: add quirk FLEXCAN_QUIRK_ENABLE_EACEN_RRS

In order to receive RTR frames in the non HW FIFO mode the RSS and EACEN bits
of the reg_ctrl2 have to be activated. As this has no side effect in the FIFO
mode, we do this unconditionally on cores with the reg_ctrl2.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
上级 4bd888a8
......@@ -187,7 +187,8 @@
*/
#define FLEXCAN_QUIRK_BROKEN_ERR_STATE BIT(1) /* [TR]WRN_INT not connected */
#define FLEXCAN_QUIRK_DISABLE_RXFG BIT(2) /* Disable RX FIFO Global mask */
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(3) /* Disble Memory error detection */
#define FLEXCAN_QUIRK_ENABLE_EACEN_RRS BIT(3) /* Enable EACEN and RRS bit in ctrl2 */
#define FLEXCAN_QUIRK_DISABLE_MECR BIT(4) /* Disble Memory error detection */
/* Structure of the message buffer */
struct flexcan_mb {
......@@ -276,11 +277,12 @@ static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
static const struct flexcan_devtype_data fsl_imx28_devtype_data;
static const struct flexcan_devtype_data fsl_imx6q_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG,
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS,
};
static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_DISABLE_MECR,
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
......@@ -825,6 +827,12 @@ static int flexcan_chip_start(struct net_device *dev)
netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
flexcan_write(reg_ctrl, &regs->ctrl);
if ((priv->devtype_data->quirks & FLEXCAN_QUIRK_ENABLE_EACEN_RRS)) {
reg_ctrl2 = flexcan_read(&regs->ctrl2);
reg_ctrl2 |= FLEXCAN_CTRL2_EACEN | FLEXCAN_CTRL2_RRS;
flexcan_write(reg_ctrl2, &regs->ctrl2);
}
/* clear and invalidate all mailboxes first */
for (i = priv->tx_mb_idx; i < ARRAY_SIZE(regs->mb); i++) {
flexcan_write(FLEXCAN_MB_CODE_RX_INACTIVE,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册