net: systemport: Fix CRC forwarding check for SYSTEMPORT Lite

SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the
GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit
is not set by default. Fix the logic such that we properly check whether
that bit is set or not and we don't forward an extra 4 bytes to the
network stack.

Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bcmsysport.c

@@ -1946,8 +1946,8 @@ static int bcm_sysport_open(struct net_device *dev)
 	if (!priv->is_lite)
 		priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD);
 	else
-		priv->crc_fwd = !!(gib_readl(priv, GIB_CONTROL) &
-				   GIB_FCS_STRIP);
+		priv->crc_fwd = !((gib_readl(priv, GIB_CONTROL) &
+				  GIB_FCS_STRIP) >> GIB_FCS_STRIP_SHIFT);
 
 	phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link,
 				0, priv->phy_interface);

drivers/net/ethernet/broadcom/bcmsysport.h

@@ -278,7 +278,8 @@ struct bcm_rsb {
 #define  GIB_GTX_CLK_EXT_CLK		(0 << GIB_GTX_CLK_SEL_SHIFT)
 #define  GIB_GTX_CLK_125MHZ		(1 << GIB_GTX_CLK_SEL_SHIFT)
 #define  GIB_GTX_CLK_250MHZ		(2 << GIB_GTX_CLK_SEL_SHIFT)
-#define  GIB_FCS_STRIP			(1 << 6)
+#define  GIB_FCS_STRIP_SHIFT		6
+#define  GIB_FCS_STRIP			(1 << GIB_FCS_STRIP_SHIFT)
 #define  GIB_LCL_LOOP_EN		(1 << 7)
 #define  GIB_LCL_LOOP_TXEN		(1 << 8)
 #define  GIB_RMT_LOOP_EN		(1 << 9)