i2c: omap: implement bus recovery

implement bus recovery methods for i2c-omap
so we can recover from situations where SCL/SDA
are stuck low.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-omap.c

@@ -482,10 +482,8 @@ static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
 
 	timeout = jiffies + OMAP_I2C_TIMEOUT;
 	while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(dev->dev, "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
-		}
+		if (time_after(jiffies, timeout))
+			return i2c_recover_bus(&dev->adapter);
 		msleep(1);
 	}
 
@@ -1210,6 +1208,68 @@ MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
 #define OMAP_I2C_SCHEME_0		0
 #define OMAP_I2C_SCHEME_1		1
 
+static int omap_i2c_get_scl(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+
+	return reg & OMAP_I2C_SYSTEST_SCL_I_FUNC;
+}
+
+static int omap_i2c_get_sda(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+
+	return reg & OMAP_I2C_SYSTEST_SDA_I_FUNC;
+}
+
+static void omap_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	if (val)
+		reg |= OMAP_I2C_SYSTEST_SCL_O;
+	else
+		reg &= ~OMAP_I2C_SYSTEST_SCL_O;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static void omap_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	reg |= OMAP_I2C_SYSTEST_ST_EN;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static void omap_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+	struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+	u32 reg;
+
+	reg = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
+	reg &= ~OMAP_I2C_SYSTEST_ST_EN;
+	omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, reg);
+}
+
+static struct i2c_bus_recovery_info omap_i2c_bus_recovery_info = {
+	.get_scl		= omap_i2c_get_scl,
+	.get_sda		= omap_i2c_get_sda,
+	.set_scl		= omap_i2c_set_scl,
+	.prepare_recovery	= omap_i2c_prepare_recovery,
+	.unprepare_recovery	= omap_i2c_unprepare_recovery,
+	.recover_bus		= i2c_generic_scl_recovery,
+};
+
 static int
 omap_i2c_probe(struct platform_device *pdev)
 {
@@ -1359,6 +1419,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	adap->algo = &omap_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 	adap->dev.of_node = pdev->dev.of_node;
+	adap->bus_recovery_info = &omap_i2c_bus_recovery_info;
 
 	/* i2c device drivers may be active on return from add_adapter() */
 	adap->nr = pdev->id;