提交 9d87a888 编写于 作者: P Peter Ujfalusi 提交者: Mark Brown

ASoC: tas2552: Add support for pll and pdm source clock selection

Instead of hard wiring the PLL_CLKIN and PDM_CLK to be sourced from BCLK add
proper clock configuration via the set_dai_sysclk callback.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 3715eda7
......@@ -34,6 +34,7 @@
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <sound/tas2552-plat.h>
#include <dt-bindings/sound/tas2552.h>
#include "tas2552.h"
......@@ -76,6 +77,7 @@ struct tas2552_data {
struct gpio_desc *enable_gpio;
unsigned char regs[TAS2552_VBAT_DATA];
unsigned int pll_clkin;
unsigned int pdm_clk;
};
/* Input mux controls */
......@@ -244,8 +246,33 @@ static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
{
struct snd_soc_codec *codec = dai->codec;
struct tas2552_data *tas2552 = dev_get_drvdata(codec->dev);
u8 reg, mask, val;
switch (clk_id) {
case TAS2552_PLL_CLKIN_MCLK:
case TAS2552_PLL_CLKIN_BCLK:
case TAS2552_PLL_CLKIN_IVCLKIN:
case TAS2552_PLL_CLKIN_1_8_FIXED:
mask = TAS2552_PLL_SRC_MASK;
val = (clk_id << 3) & mask; /* bit 4:5 in the register */
reg = TAS2552_CFG_1;
tas2552->pll_clkin = freq;
break;
case TAS2552_PDM_CLK_PLL:
case TAS2552_PDM_CLK_IVCLKIN:
case TAS2552_PDM_CLK_BCLK:
case TAS2552_PDM_CLK_MCLK:
mask = TAS2552_PDM_CLK_SEL_MASK;
val = (clk_id >> 1) & mask; /* bit 0:1 in the register */
reg = TAS2552_PDM_CFG;
tas2552->pdm_clk = freq;
break;
default:
dev_err(codec->dev, "Invalid clk id: %d\n", clk_id);
return -EINVAL;
}
tas2552->pll_clkin = freq;
snd_soc_update_bits(codec, reg, mask, val);
return 0;
}
......@@ -366,13 +393,11 @@ static int tas2552_codec_probe(struct snd_soc_codec *codec)
goto probe_fail;
}
snd_soc_write(codec, TAS2552_CFG_1, TAS2552_MUTE |
TAS2552_PLL_SRC_BCLK);
snd_soc_write(codec, TAS2552_CFG_1, TAS2552_MUTE);
snd_soc_write(codec, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL |
TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ);
snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I);
snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8);
snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_CLK_SEL_PLL);
snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 |
TAS2552_APT_THRESH_2_1_7);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册