Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Hi David, the following patch set has code cleanup patches, minor enhancements
and non-critical fixes. Pls consider applying to the net-next tree. Thanks!

Patch 1 removes duplicate code in be_setup_wol() routine making it simpler
and more readable.

Patch 2 fixes the the bridge mode return value for the ndo_bridge_getlink()
call. Instead of just relying on the SRIOV enabled state, the driver now
queries the FW, for the actual mode of bridge.

Patch 3 removes code for setting D0 power state as it's already done
in pci_enable_device()

Patch 4 fixes a bad return value in be_check_ufi_compatibility() routine
introduced by an earlier commit.

Patch 5 fixes a field in udp header being accessed while in network endian
format.

Patch 6 fixes the be_mcc_notify() routine to return an error status when
the FW/HW is in an error state.

Patch 7 fixes the be_cmd_rx_filter() routine to issue the RX_FILTER cmd
and not wait for a completion from the FW. If the FW/adapter
is in an error state, this change helps in not holding up the rtnl_lock
and keeping bottom halves disabled while the driver timesout waiting for
a response from the FW.

Patch 8 fixes the be_cmd_set_loopback() routine to issue the LOOPBACK cmd
and not wait for the FW completion while spin_lock_bh() is held on the
mcc_lock. As the cmd is always issued from ethtool in a process context,
it can sleep till the FW completion is received.

Patch 9 bumps up the driver version to 10.6.0.3
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -37,7 +37,7 @@
 #include "be_hw.h"
 #include "be_roce.h"
 
-#define DRV_VER			"10.6.0.2"
+#define DRV_VER			"10.6.0.3"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"Emulex BladeEngine2"
 #define BE3_NAME		"Emulex BladeEngine3"

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -88,19 +88,21 @@ static inline void *embedded_payload(struct be_mcc_wrb *wrb)
 	return wrb->payload.embedded_payload;
 }
 
-static void be_mcc_notify(struct be_adapter *adapter)
+static int be_mcc_notify(struct be_adapter *adapter)
 {
 	struct be_queue_info *mccq = &adapter->mcc_obj.q;
 	u32 val = 0;
 
 	if (be_check_error(adapter, BE_ERROR_ANY))
-		return;
+		return -EIO;
 
 	val |= mccq->id & DB_MCCQ_RING_ID_MASK;
 	val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
 
 	wmb();
 	iowrite32(val, adapter->db + DB_MCCQ_OFFSET);
+
+	return 0;
 }
 
 /* To check if valid bit is set, check the entire word as we don't know
@@ -170,6 +172,12 @@ static void be_async_cmd_process(struct be_adapter *adapter,
 		return;
 	}
 
+	if (opcode == OPCODE_LOWLEVEL_SET_LOOPBACK_MODE &&
+	    subsystem == CMD_SUBSYSTEM_LOWLEVEL) {
+		complete(&adapter->et_cmd_compl);
+		return;
+	}
+
 	if ((opcode == OPCODE_COMMON_WRITE_FLASHROM ||
 	     opcode == OPCODE_COMMON_WRITE_OBJECT) &&
 	    subsystem == CMD_SUBSYSTEM_COMMON) {
@@ -541,7 +549,9 @@ static int be_mcc_notify_wait(struct be_adapter *adapter)
 
 	resp = be_decode_resp_hdr(wrb->tag0, wrb->tag1);
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto out;
 
 	status = be_mcc_wait_compl(adapter);
 	if (status == -EIO)
@@ -1547,7 +1557,10 @@ int be_cmd_get_stats(struct be_adapter *adapter, struct be_dma_mem *nonemb_cmd)
 	else
 		hdr->version = 2;
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err;
+
 	adapter->stats_cmd_sent = true;
 
 err:
@@ -1583,7 +1596,10 @@ int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
 	req->cmd_params.params.pport_num = cpu_to_le16(adapter->hba_port_num);
 	req->cmd_params.params.reset_stats = 0;
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err;
+
 	adapter->stats_cmd_sent = true;
 
 err:
@@ -1687,8 +1703,7 @@ int be_cmd_get_die_temperature(struct be_adapter *adapter)
 			       OPCODE_COMMON_GET_CNTL_ADDITIONAL_ATTRIBUTES,
 			       sizeof(*req), wrb, NULL);
 
-	be_mcc_notify(adapter);
-
+	status = be_mcc_notify(adapter);
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
@@ -1860,7 +1875,7 @@ static int __be_cmd_modify_eqd(struct be_adapter *adapter,
 				cpu_to_le32(set_eqd[i].delay_multiplier);
 	}
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
@@ -1953,7 +1968,7 @@ static int __be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 value)
 			memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN);
 	}
 
-	status = be_mcc_notify_wait(adapter);
+	status = be_mcc_notify(adapter);
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
@@ -2320,7 +2335,10 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	req->addr_high = cpu_to_le32(upper_32_bits(cmd->dma +
 				sizeof(struct lancer_cmd_req_write_object)));
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err_unlock;
+
 	spin_unlock_bh(&adapter->mcc_lock);
 
 	if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
@@ -2491,7 +2509,10 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	req->params.op_code = cpu_to_le32(flash_opcode);
 	req->params.data_buf_size = cpu_to_le32(buf_size);
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err_unlock;
+
 	spin_unlock_bh(&adapter->mcc_lock);
 
 	if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
@@ -2585,7 +2606,7 @@ int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
 	wrb = wrb_from_mccq(adapter);
 	if (!wrb) {
 		status = -EBUSY;
-		goto err;
+		goto err_unlock;
 	}
 
 	req = embedded_payload(wrb);
@@ -2599,8 +2620,19 @@ int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
 	req->loopback_type = loopback_type;
 	req->loopback_state = enable;
 
-	status = be_mcc_notify_wait(adapter);
-err:
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err_unlock;
+
+	spin_unlock_bh(&adapter->mcc_lock);
+
+	if (!wait_for_completion_timeout(&adapter->et_cmd_compl,
+					 msecs_to_jiffies(SET_LB_MODE_TIMEOUT)))
+		status = -ETIMEDOUT;
+
+	return status;
+
+err_unlock:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -2636,7 +2668,9 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
 	req->num_pkts = cpu_to_le32(num_pkts);
 	req->loopback_type = cpu_to_le32(loopback_type);
 
-	be_mcc_notify(adapter);
+	status = be_mcc_notify(adapter);
+	if (status)
+		goto err;
 
 	spin_unlock_bh(&adapter->mcc_lock);
 

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -1495,6 +1495,8 @@ struct be_cmd_resp_acpi_wol_magic_config_v1 {
 #define BE_PME_D3COLD_CAP		0x80
 
 /********************** LoopBack test *********************/
+#define SET_LB_MODE_TIMEOUT		12000
+
 struct be_cmd_req_loopback_test {
 	struct be_cmd_req_hdr hdr;
 	u32 loopback_type;
@@ -1758,6 +1760,7 @@ struct be_cmd_req_set_mac_list {
 /*********************** HSW Config ***********************/
 #define PORT_FWD_TYPE_VEPA		0x3
 #define PORT_FWD_TYPE_VEB		0x2
+#define PORT_FWD_TYPE_PASSTHRU		0x1
 
 #define ENABLE_MAC_SPOOFCHK		0x2
 #define DISABLE_MAC_SPOOFCHK		0x3

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -847,10 +847,21 @@ static int be_test_ddr_dma(struct be_adapter *adapter)
 static u64 be_loopback_test(struct be_adapter *adapter, u8 loopback_type,
 			    u64 *status)
 {
-	be_cmd_set_loopback(adapter, adapter->hba_port_num, loopback_type, 1);
+	int ret;
+
+	ret = be_cmd_set_loopback(adapter, adapter->hba_port_num,
+				  loopback_type, 1);
+	if (ret)
+		return ret;
+
 	*status = be_cmd_loopback_test(adapter, adapter->hba_port_num,
 				       loopback_type, 1500, 2, 0xabc);
-	be_cmd_set_loopback(adapter, adapter->hba_port_num, BE_NO_LOOPBACK, 1);
+
+	ret = be_cmd_set_loopback(adapter, adapter->hba_port_num,
+				  BE_NO_LOOPBACK, 1);
+	if (ret)
+		return ret;
+
 	return *status;
 }
 

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1254,7 +1254,7 @@ static bool be_send_pkt_to_bmc(struct be_adapter *adapter,
 	if (is_udp_pkt((*skb))) {
 		struct udphdr *udp = udp_hdr((*skb));
 
-		switch (udp->dest) {
+		switch (ntohs(udp->dest)) {
 		case DHCP_CLIENT_PORT:
 			os2bmc = is_dhcp_client_filt_enabled(adapter);
 			goto done;
@@ -3529,15 +3529,15 @@ static int be_open(struct net_device *netdev)
 
 static int be_setup_wol(struct be_adapter *adapter, bool enable)
 {
+	struct device *dev = &adapter->pdev->dev;
 	struct be_dma_mem cmd;
-	int status = 0;
 	u8 mac[ETH_ALEN];
+	int status;
 
 	eth_zero_addr(mac);
 
 	cmd.size = sizeof(struct be_cmd_req_acpi_wol_magic_config);
-	cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
-				     GFP_KERNEL);
+	cmd.va = dma_zalloc_coherent(dev, cmd.size, &cmd.dma, GFP_KERNEL);
 	if (!cmd.va)
 		return -ENOMEM;
 
@@ -3546,24 +3546,18 @@ static int be_setup_wol(struct be_adapter *adapter, bool enable)
 						PCICFG_PM_CONTROL_OFFSET,
 						PCICFG_PM_CONTROL_MASK);
 		if (status) {
-			dev_err(&adapter->pdev->dev,
-				"Could not enable Wake-on-lan\n");
-			dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
-					  cmd.dma);
-			return status;
+			dev_err(dev, "Could not enable Wake-on-lan\n");
+			goto err;
 		}
-		status = be_cmd_enable_magic_wol(adapter,
-						 adapter->netdev->dev_addr,
-						 &cmd);
-		pci_enable_wake(adapter->pdev, PCI_D3hot, 1);
-		pci_enable_wake(adapter->pdev, PCI_D3cold, 1);
 	} else {
-		status = be_cmd_enable_magic_wol(adapter, mac, &cmd);
-		pci_enable_wake(adapter->pdev, PCI_D3hot, 0);
-		pci_enable_wake(adapter->pdev, PCI_D3cold, 0);
+		ether_addr_copy(mac, adapter->netdev->dev_addr);
 	}
 
-	dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
+	status = be_cmd_enable_magic_wol(adapter, mac, &cmd);
+	pci_enable_wake(adapter->pdev, PCI_D3hot, enable);
+	pci_enable_wake(adapter->pdev, PCI_D3cold, enable);
+err:
+	dma_free_coherent(dev, cmd.size, cmd.va, cmd.dma);
 	return status;
 }
 
@@ -4924,7 +4918,7 @@ static bool be_check_ufi_compatibility(struct be_adapter *adapter,
 {
 	if (!fhdr) {
 		dev_err(&adapter->pdev->dev, "Invalid FW UFI file");
-		return -1;
+		return false;
 	}
 
 	/* First letter of the build version is used to identify
@@ -5079,9 +5073,6 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 	int status = 0;
 	u8 hsw_mode;
 
-	if (!sriov_enabled(adapter))
-		return 0;
-
 	/* BE and Lancer chips support VEB mode only */
 	if (BEx_chip(adapter) || lancer_chip(adapter)) {
 		hsw_mode = PORT_FWD_TYPE_VEB;
@@ -5091,6 +5082,9 @@ static int be_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
 					       NULL);
 		if (status)
 			return 0;
+
+		if (hsw_mode == PORT_FWD_TYPE_PASSTHRU)
+			return 0;
 	}
 
 	return ndo_dflt_bridge_getlink(skb, pid, seq, dev,
@@ -5813,7 +5807,6 @@ static int be_pci_resume(struct pci_dev *pdev)
 	if (status)
 		return status;
 
-	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
 	status = be_resume(adapter);
@@ -5893,7 +5886,6 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
 		return PCI_ERS_RESULT_DISCONNECT;
 
 	pci_set_master(pdev);
-	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
 	/* Check if card is ok and fw is ready */