drm/i915/chv: Add update and enable pll for Cherryview

Added programming PLL for CHV based on "Application note for 1273 CHV
Display phy".

v2:  -Break the common lane reset into another patch.
     -Break the clock calculation into another patch.

    -The changes are based on Ville review.
    -Rework based on DPIO register define naming convention change.
    -Break the dpio write into few lines to improve readability.
    -Correct the udelay during chv_enable_pll.
    -clean up some magic numbers with some new define.
    -program the afc recal bit which was missed.

v3: Based on Ville review
	-  minor correction of the bit defination
    - add deassert/propagate data lane reset

v4: Corrected the udelay between dclkp enable and pll enable.
	Minor comment and better way to clear the TX lane reset.

v5: Squash in fixup from Rafael Barbalho.

[vsyrjala: v6: Polish the defines (Imre)]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -681,6 +681,12 @@ enum punit_power_well {
 #define _VLV_PCS_DW9_CH1		0x8424
 #define	VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1)
 
+#define _CHV_PCS_DW10_CH0		0x8228
+#define _CHV_PCS_DW10_CH1		0x8428
+#define   DPIO_PCS_SWING_CALC_TX0_TX2	(1<<30)
+#define   DPIO_PCS_SWING_CALC_TX1_TX3	(1<<31)
+#define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1)
+
 #define _VLV_PCS_DW11_CH0		0x822c
 #define _VLV_PCS_DW11_CH1		0x842c
 #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1)
@@ -699,14 +705,21 @@ enum punit_power_well {
 
 #define _VLV_TX_DW2_CH0			0x8288
 #define _VLV_TX_DW2_CH1			0x8488
+#define   DPIO_SWING_MARGIN_SHIFT	16
+#define   DPIO_SWING_MARGIN_MASK	(0xff << DPIO_SWING_MARGIN_SHIFT)
+#define   DPIO_UNIQ_TRANS_SCALE_SHIFT	8
 #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1)
 
 #define _VLV_TX_DW3_CH0			0x828c
 #define _VLV_TX_DW3_CH1			0x848c
+/* The following bit for CHV phy */
+#define   DPIO_TX_UNIQ_TRANS_SCALE_EN	(1<<27)
 #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1)
 
 #define _VLV_TX_DW4_CH0			0x8290
 #define _VLV_TX_DW4_CH1			0x8490
+#define   DPIO_SWING_DEEMPH9P5_SHIFT	24
+#define   DPIO_SWING_DEEMPH9P5_MASK	(0xff << DPIO_SWING_DEEMPH9P5_SHIFT)
 #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1)
 
 #define _VLV_TX3_DW4_CH0		0x690
@@ -726,6 +739,62 @@ enum punit_power_well {
 #define _VLV_TX_DW14_CH1		0x84b8
 #define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1)
 
+/* CHV dpPhy registers */
+#define _CHV_PLL_DW0_CH0		0x8000
+#define _CHV_PLL_DW0_CH1		0x8180
+#define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1)
+
+#define _CHV_PLL_DW1_CH0		0x8004
+#define _CHV_PLL_DW1_CH1		0x8184
+#define   DPIO_CHV_N_DIV_SHIFT		8
+#define   DPIO_CHV_M1_DIV_BY_2		(0 << 0)
+#define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1)
+
+#define _CHV_PLL_DW2_CH0		0x8008
+#define _CHV_PLL_DW2_CH1		0x8188
+#define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1)
+
+#define _CHV_PLL_DW3_CH0		0x800c
+#define _CHV_PLL_DW3_CH1		0x818c
+#define  DPIO_CHV_FRAC_DIV_EN		(1 << 16)
+#define  DPIO_CHV_FIRST_MOD		(0 << 8)
+#define  DPIO_CHV_SECOND_MOD		(1 << 8)
+#define  DPIO_CHV_FEEDFWD_GAIN_SHIFT	0
+#define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1)
+
+#define _CHV_PLL_DW6_CH0		0x8018
+#define _CHV_PLL_DW6_CH1		0x8198
+#define   DPIO_CHV_GAIN_CTRL_SHIFT	16
+#define	  DPIO_CHV_INT_COEFF_SHIFT	8
+#define   DPIO_CHV_PROP_COEFF_SHIFT	0
+#define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1)
+
+#define _CHV_CMN_DW13_CH0		0x8134
+#define _CHV_CMN_DW0_CH1		0x8080
+#define   DPIO_CHV_S1_DIV_SHIFT		21
+#define   DPIO_CHV_P1_DIV_SHIFT		13 /* 3 bits */
+#define   DPIO_CHV_P2_DIV_SHIFT		8  /* 5 bits */
+#define   DPIO_CHV_K_DIV_SHIFT		4
+#define   DPIO_PLL_FREQLOCK		(1 << 1)
+#define   DPIO_PLL_LOCK			(1 << 0)
+#define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1)
+
+#define _CHV_CMN_DW14_CH0		0x8138
+#define _CHV_CMN_DW1_CH1		0x8084
+#define   DPIO_AFC_RECAL		(1 << 14)
+#define   DPIO_DCLKP_EN			(1 << 13)
+#define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1)
+
+#define CHV_CMN_DW30			0x8178
+#define   DPIO_LRC_BYPASS		(1 << 3)
+
+#define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \
+					(lane) * 0x200 + (offset))
+
+#define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac)
+#define   DPIO_FRC_LATENCY_SHFIT	8
+#define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8)
+#define   DPIO_UPAR_SHIFT		30
 /*
  * Fence registers
  */
@@ -1415,6 +1484,7 @@ enum punit_power_well {
 #define   DPLL_LOCK_VLV			(1<<15)
 #define   DPLL_INTEGRATED_CRI_CLK_VLV	(1<<14)
 #define   DPLL_INTEGRATED_CLOCK_VLV	(1<<13)
+#define   DPLL_SSC_REF_CLOCK_CHV	(1<<13)
 #define   DPLL_PORTC_READY_MASK		(0xf << 4)
 #define   DPLL_PORTB_READY_MASK		(0xf)
 

drivers/gpu/drm/i915/intel_display.c

@@ -1555,6 +1555,49 @@ static void vlv_enable_pll(struct intel_crtc *crtc)
 	udelay(150); /* wait for warmup */
 }
 
+static void chv_enable_pll(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+	enum dpio_channel port = vlv_pipe_to_channel(pipe);
+	int dpll = DPLL(crtc->pipe);
+	u32 tmp;
+
+	assert_pipe_disabled(dev_priv, crtc->pipe);
+
+	BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
+
+	mutex_lock(&dev_priv->dpio_lock);
+
+	/* Enable back the 10bit clock to display controller */
+	tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+	tmp |= DPIO_DCLKP_EN;
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
+
+	/*
+	 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
+	 */
+	udelay(1);
+
+	/* Enable PLL */
+	tmp = I915_READ(dpll);
+	tmp |= DPLL_VCO_ENABLE;
+	I915_WRITE(dpll, tmp);
+
+	/* Check PLL is locked */
+	if (wait_for(((I915_READ(dpll) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+		DRM_ERROR("PLL %d failed to lock\n", pipe);
+
+	/* Deassert soft data lane reset*/
+	tmp = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port));
+	tmp |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), tmp);
+
+
+	mutex_unlock(&dev_priv->dpio_lock);
+}
+
 static void i9xx_enable_pll(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -4470,8 +4513,12 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 
 	is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
 
-	if (!is_dsi)
-		vlv_enable_pll(intel_crtc);
+	if (!is_dsi) {
+		if (IS_CHERRYVIEW(dev))
+			chv_enable_pll(intel_crtc);
+		else
+			vlv_enable_pll(intel_crtc);
+	}
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		if (encoder->pre_enable)
@@ -5326,6 +5373,87 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 	mutex_unlock(&dev_priv->dpio_lock);
 }
 
+static void chv_update_pll(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pipe = crtc->pipe;
+	int dpll_reg = DPLL(crtc->pipe);
+	enum dpio_channel port = vlv_pipe_to_channel(pipe);
+	u32 val, loopfilter, intcoeff;
+	u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
+	int refclk;
+
+	mutex_lock(&dev_priv->dpio_lock);
+
+	bestn = crtc->config.dpll.n;
+	bestm2_frac = crtc->config.dpll.m2 & 0x3fffff;
+	bestm1 = crtc->config.dpll.m1;
+	bestm2 = crtc->config.dpll.m2 >> 22;
+	bestp1 = crtc->config.dpll.p1;
+	bestp2 = crtc->config.dpll.p2;
+
+	/*
+	 * Enable Refclk and SSC
+	 */
+	val = I915_READ(dpll_reg);
+	val |= (DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV);
+	I915_WRITE(dpll_reg, val);
+
+	/* Propagate soft reset to data lane reset */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port));
+	val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), val);
+
+	/* Disable 10bit clock to display controller */
+	val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+	val &= ~DPIO_DCLKP_EN;
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
+
+	/* p1 and p2 divider */
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
+			5 << DPIO_CHV_S1_DIV_SHIFT |
+			bestp1 << DPIO_CHV_P1_DIV_SHIFT |
+			bestp2 << DPIO_CHV_P2_DIV_SHIFT |
+			1 << DPIO_CHV_K_DIV_SHIFT);
+
+	/* Feedback post-divider - m2 */
+	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
+
+	/* Feedback refclk divider - n and m1 */
+	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
+			DPIO_CHV_M1_DIV_BY_2 |
+			1 << DPIO_CHV_N_DIV_SHIFT);
+
+	/* M2 fraction division */
+	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+
+	/* M2 fraction division enable */
+	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
+		       DPIO_CHV_FRAC_DIV_EN |
+		       (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT));
+
+	/* Loop filter */
+	refclk = i9xx_get_refclk(&crtc->base, 0);
+	loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT |
+		2 << DPIO_CHV_GAIN_CTRL_SHIFT;
+	if (refclk == 100000)
+		intcoeff = 11;
+	else if (refclk == 38400)
+		intcoeff = 10;
+	else
+		intcoeff = 9;
+	loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT;
+	vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
+
+	/* AFC Recal */
+	vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
+			vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
+			DPIO_AFC_RECAL);
+
+	mutex_unlock(&dev_priv->dpio_lock);
+}
+
 static void i9xx_update_pll(struct intel_crtc *crtc,
 			    intel_clock_t *reduced_clock,
 			    int num_connectors)
@@ -5709,6 +5837,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 		i8xx_update_pll(intel_crtc,
 				has_reduced_clock ? &reduced_clock : NULL,
 				num_connectors);
+	} else if (IS_CHERRYVIEW(dev)) {
+		chv_update_pll(intel_crtc);
 	} else if (IS_VALLEYVIEW(dev)) {
 		vlv_update_pll(intel_crtc);
 	} else {