USB: aten uc2324 is really a moschip 7840

I've opened up the case, and the chips in the ATEN UC2324 are:

Moschip
MCS7840CV-AA
69507-6B1
0650
(USB to 4-port serial)

(logo with AF kerned together)  0748  
24BC02  
SINGLP
(unknown 8-pin chip)

(logo looks like 3 or Z in circle)
ZT3243LEEA    0752
B7A16420.T
(4 chips, so this will be RS232 line driver)
(Probably equivalent of Sipex SP3243)

So the ATEN 2324 (aten2011.c driver), is definitely the Moschip 7840,
and should use the mos7840.c driver.  I expect you will remove the
aten2011.c driver from the staging area.

From the aten2011.c source code, the device ID for the UC2322 (2 port
serial) is 0x7820, just like the Moschip evaluation board.  This value
should be added to the device id table of mos7840.c.

Here's a patch that adds these devices to the driver.


From: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/mos7840.c

@@ -124,10 +124,13 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- *  - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
 #define USB_VENDOR_ID_ATENINTL		0x0557
 #define ATENINTL_DEVICE_ID_UC2324	0x2011
+#define ATENINTL_DEVICE_ID_UC2322	0x7820
 
 /* Interrupt Routine Defines    */
 
@@ -177,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
 
@@ -186,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };