staging:media:davinci_vpfe: Fixed block comments according to kernel coding style

Fixed block comments by following the checkpatch warnings

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on separate line
Signed-off-by: NThaissa Falbo <thaissa.falbo@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/media/davinci_vpfe/davinci_vpfe_user.h

@@ -538,8 +538,8 @@ struct vpfe_isif_raw_config {
 };
 
 /**********************************************************************
-      IPIPE API Structures
-**********************************************************************/
+ *	IPIPE API Structures
+ **********************************************************************/
 
 /* IPIPE module configurations */
 

drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c

@@ -682,8 +682,10 @@ ipipe_set_rgb2rgb_regs(void __iomem *base_addr, unsigned int id,
 	ipipe_clock_enable(base_addr);
 
 	if (id == IPIPE_RGB2RGB_2) {
-		/* For second RGB module, gain integer is 3 bits instead
-		of 4, offset has 11 bits insread of 13 */
+		/*
+		 * For second RGB module, gain integer is 3 bits instead
+		 * of 4, offset has 11 bits insread of 13
+		 */
 		offset = RGB2_MUL_BASE;
 		integ_mask = 0x7;
 		offset_mask = RGB2RGB_2_OFST_MASK;
@@ -792,8 +794,10 @@ ipipe_set_3d_lut_regs(void __iomem *base_addr, void __iomem *isp5_base_addr,
 	/* valied table */
 	tbl = lut_3d->table;
 	for (i = 0; i < VPFE_IPIPE_MAX_SIZE_3D_LUT; i++) {
-		/* Each entry has 0-9 (B), 10-19 (G) and
-		20-29 R values */
+		/*
+		 * Each entry has 0-9 (B), 10-19 (G) and
+		 * 20-29 R values
+		 */
 		val = tbl[i].b & D3_LUT_ENTRY_MASK;
 		val |= (tbl[i].g & D3_LUT_ENTRY_MASK) <<
 			 D3_LUT_ENTRY_G_SHIFT;

drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.h

@@ -278,9 +278,10 @@
 /* Resizer Rescale Parameters */
 #define RSZ_EN_A		0x58
 #define RSZ_EN_B		0xe8
-/* offset of the registers to be added with base register of
-   either RSZ0 or RSZ1
-*/
+/*
+ * offset of the registers to be added with base register of
+ * either RSZ0 or RSZ1
+ */
 #define RSZ_MODE		0x4
 #define RSZ_420			0x8
 #define RSZ_I_VPS		0xc

drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c

@@ -442,8 +442,10 @@ static int vpfe_register_entities(struct vpfe_device *vpfe_dev)
 
 	/* create links now, starting with external(i2c) entities */
 	for (i = 0; i < vpfe_dev->num_ext_subdevs; i++)
-		/* if entity has no pads (ex: amplifier),
-		   cant establish link */
+		/*
+		 * if entity has no pads (ex: amplifier),
+		 * cant establish link
+		 */
 		if (vpfe_dev->sd[i]->entity.num_pads) {
 			ret = media_create_pad_link(&vpfe_dev->sd[i]->entity,
 				0, &vpfe_dev->vpfe_isif.subdev.entity,

drivers/staging/media/davinci_vpfe/vpfe_video.c

@@ -178,9 +178,10 @@ static int vpfe_update_pipe_state(struct vpfe_video_device *video)
 	if (ret)
 		return ret;
 
-	/* Find out if there is any input video
-	  if yes, it is single shot.
-	*/
+	/*
+	 * Find out if there is any input video
+	 * if yes, it is single shot.
+	 */
 	if (pipe->input_num == 0) {
 		pipe->state = VPFE_PIPELINE_STREAM_CONTINUOUS;
 		ret = vpfe_update_current_ext_subdev(video);
@@ -529,10 +530,11 @@ static int vpfe_release(struct file *file)
 	if (fh->io_allowed) {
 		if (video->started) {
 			vpfe_stop_capture(video);
-			/* mark pipe state as stopped in vpfe_release(),
-			   as app might call streamon() after streamoff()
-			   in which case driver has to start streaming.
-			*/
+			/*
+			 * mark pipe state as stopped in vpfe_release(),
+			 * as app might call streamon() after streamoff()
+			 * in which case driver has to start streaming.
+			 */
 			video->pipe.state = VPFE_PIPELINE_STREAM_STOPPED;
 			vb2_streamoff(&video->buffer_queue,
 				      video->buffer_queue.type);
@@ -672,8 +674,10 @@ static int vpfe_enum_fmt(struct file *file, void  *priv,
 
 	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt\n");
 
-	/* since already subdev pad format is set,
-	only one pixel format is available */
+	/*
+	 * since already subdev pad format is set,
+	 * only one pixel format is available
+	 */
 	if (fmt->index > 0) {
 		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid index\n");
 		return -EINVAL;