b43: use bcma_pmu_spuravoid_pllupdate()

Do not implement this in b43, but use bcma_pmu_spuravoid_pllupdate().
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_n.c

@@ -5100,63 +5100,11 @@ static void b43_chantab_phy_upload(struct b43_wldev *dev,
 /* http://bcm-v4.sipsolutions.net/802.11/PmuSpurAvoid */
 static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
 {
-	struct bcma_drv_cc __maybe_unused *cc;
-	u32 __maybe_unused pmu_ctl;
-
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		cc = &dev->dev->bdev->bus->drv_cc;
-		if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
-			if (avoid) {
-				bcma_chipco_pll_write(cc, 0x0, 0x11500010);
-				bcma_chipco_pll_write(cc, 0x1, 0x000C0C06);
-				bcma_chipco_pll_write(cc, 0x2, 0x0F600a08);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x2001E920);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			} else {
-				bcma_chipco_pll_write(cc, 0x0, 0x11100010);
-				bcma_chipco_pll_write(cc, 0x1, 0x000c0c06);
-				bcma_chipco_pll_write(cc, 0x2, 0x03000a08);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			}
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
-		} else if (dev->dev->chip_id == 0x4716) {
-			if (avoid) {
-				bcma_chipco_pll_write(cc, 0x0, 0x11500060);
-				bcma_chipco_pll_write(cc, 0x1, 0x080C0C06);
-				bcma_chipco_pll_write(cc, 0x2, 0x0F600000);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x2001E924);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			} else {
-				bcma_chipco_pll_write(cc, 0x0, 0x11100060);
-				bcma_chipco_pll_write(cc, 0x1, 0x080c0c06);
-				bcma_chipco_pll_write(cc, 0x2, 0x03000000);
-				bcma_chipco_pll_write(cc, 0x3, 0x00000000);
-				bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
-				bcma_chipco_pll_write(cc, 0x5, 0x88888815);
-			}
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD |
-				  BCMA_CC_PMU_CTL_NOILPONW;
-		} else if (dev->dev->chip_id == 0x4322 ||
-			   dev->dev->chip_id == 0x4340 ||
-			   dev->dev->chip_id == 0x4341) {
-			bcma_chipco_pll_write(cc, 0x0, 0x11100070);
-			bcma_chipco_pll_write(cc, 0x1, 0x1014140a);
-			bcma_chipco_pll_write(cc, 0x5, 0x88888854);
-			if (avoid)
-				bcma_chipco_pll_write(cc, 0x2, 0x05201828);
-			else
-				bcma_chipco_pll_write(cc, 0x2, 0x05001828);
-			pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
-		} else {
-			return;
-		}
-		bcma_cc_set32(cc, BCMA_CC_PMU_CTL, pmu_ctl);
+		bcma_pmu_spuravoid_pllupdate(&dev->dev->bdev->bus->drv_cc,
+					     avoid);
 		break;
 #endif
 #ifdef CONFIG_B43_SSB