提交 9af45651 编写于 作者: B Brian Gerst 提交者: Tejun Heo

x86-64: Move kernelstack from PDA to per-cpu.

Also clean up PER_CPU_VAR usage in xen-asm_64.S

tj: * remove now unused stack_thread_info()
    * s/kernelstack/kernel_stack/
    * added FIXME comment in xen-asm_64.S
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
上级 c6f5e0ac
...@@ -112,8 +112,8 @@ ENTRY(ia32_sysenter_target) ...@@ -112,8 +112,8 @@ ENTRY(ia32_sysenter_target)
CFI_DEF_CFA rsp,0 CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp CFI_REGISTER rsp,rbp
SWAPGS_UNSAFE_STACK SWAPGS_UNSAFE_STACK
movq %gs:pda_kernelstack, %rsp movq PER_CPU_VAR(kernel_stack), %rsp
addq $(PDA_STACKOFFSET),%rsp addq $(KERNEL_STACK_OFFSET),%rsp
/* /*
* No need to follow this irqs on/off section: the syscall * No need to follow this irqs on/off section: the syscall
* disabled irqs, here we enable it straight after entry: * disabled irqs, here we enable it straight after entry:
...@@ -273,13 +273,13 @@ ENDPROC(ia32_sysenter_target) ...@@ -273,13 +273,13 @@ ENDPROC(ia32_sysenter_target)
ENTRY(ia32_cstar_target) ENTRY(ia32_cstar_target)
CFI_STARTPROC32 simple CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/ /*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK SWAPGS_UNSAFE_STACK
movl %esp,%r8d movl %esp,%r8d
CFI_REGISTER rsp,r8 CFI_REGISTER rsp,r8
movq %gs:pda_kernelstack,%rsp movq PER_CPU_VAR(kernel_stack),%rsp
/* /*
* No need to follow this irqs on/off section: the syscall * No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry: * disabled irqs and here we enable it straight after entry:
......
...@@ -13,7 +13,7 @@ ...@@ -13,7 +13,7 @@
struct x8664_pda { struct x8664_pda {
unsigned long unused1; unsigned long unused1;
unsigned long unused2; unsigned long unused2;
unsigned long kernelstack; /* 16 top of kernel stack for current */ unsigned long unused3;
unsigned long oldrsp; /* 24 user rsp for system call */ unsigned long oldrsp; /* 24 user rsp for system call */
int irqcount; /* 32 Irq nesting counter. Starts -1 */ int irqcount; /* 32 Irq nesting counter. Starts -1 */
unsigned int unused6; /* 36 was cpunumber */ unsigned int unused6; /* 36 was cpunumber */
...@@ -44,6 +44,4 @@ extern void pda_init(int); ...@@ -44,6 +44,4 @@ extern void pda_init(int);
#endif #endif
#define PDA_STACKOFFSET (5*8)
#endif /* _ASM_X86_PDA_H */ #endif /* _ASM_X86_PDA_H */
...@@ -194,25 +194,21 @@ static inline struct thread_info *current_thread_info(void) ...@@ -194,25 +194,21 @@ static inline struct thread_info *current_thread_info(void)
#else /* X86_32 */ #else /* X86_32 */
#include <asm/pda.h> #include <asm/percpu.h>
#define KERNEL_STACK_OFFSET (5*8)
/* /*
* macros/functions for gaining access to the thread information structure * macros/functions for gaining access to the thread information structure
* preempt_count needs to be 1 initially, until the scheduler is functional. * preempt_count needs to be 1 initially, until the scheduler is functional.
*/ */
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
static inline struct thread_info *current_thread_info(void) DECLARE_PER_CPU(unsigned long, kernel_stack);
{
struct thread_info *ti;
ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
return ti;
}
/* do not use in interrupt context */ static inline struct thread_info *current_thread_info(void)
static inline struct thread_info *stack_thread_info(void)
{ {
struct thread_info *ti; struct thread_info *ti;
asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); ti = (void *)(percpu_read(kernel_stack) +
KERNEL_STACK_OFFSET - THREAD_SIZE);
return ti; return ti;
} }
...@@ -220,8 +216,8 @@ static inline struct thread_info *stack_thread_info(void) ...@@ -220,8 +216,8 @@ static inline struct thread_info *stack_thread_info(void)
/* how to get the thread information struct from ASM */ /* how to get the thread information struct from ASM */
#define GET_THREAD_INFO(reg) \ #define GET_THREAD_INFO(reg) \
movq %gs:pda_kernelstack,reg ; \ movq PER_CPU_VAR(kernel_stack),reg ; \
subq $(THREAD_SIZE-PDA_STACKOFFSET),reg subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
#endif #endif
......
...@@ -49,7 +49,6 @@ int main(void) ...@@ -49,7 +49,6 @@ int main(void)
BLANK(); BLANK();
#undef ENTRY #undef ENTRY
#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry)) #define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
ENTRY(kernelstack);
ENTRY(oldrsp); ENTRY(oldrsp);
ENTRY(irqcount); ENTRY(irqcount);
DEFINE(pda_size, sizeof(struct x8664_pda)); DEFINE(pda_size, sizeof(struct x8664_pda));
......
...@@ -889,6 +889,10 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) = ...@@ -889,6 +889,10 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64; per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
#endif #endif
DEFINE_PER_CPU(unsigned long, kernel_stack) =
(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
EXPORT_PER_CPU_SYMBOL(kernel_stack);
void __cpuinit pda_init(int cpu) void __cpuinit pda_init(int cpu)
{ {
struct x8664_pda *pda = cpu_pda(cpu); struct x8664_pda *pda = cpu_pda(cpu);
...@@ -900,8 +904,6 @@ void __cpuinit pda_init(int cpu) ...@@ -900,8 +904,6 @@ void __cpuinit pda_init(int cpu)
load_pda_offset(cpu); load_pda_offset(cpu);
pda->irqcount = -1; pda->irqcount = -1;
pda->kernelstack = (unsigned long)stack_thread_info() -
PDA_STACKOFFSET + THREAD_SIZE;
if (cpu != 0) { if (cpu != 0) {
if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
......
...@@ -468,7 +468,7 @@ END(ret_from_fork) ...@@ -468,7 +468,7 @@ END(ret_from_fork)
ENTRY(system_call) ENTRY(system_call)
CFI_STARTPROC simple CFI_STARTPROC simple
CFI_SIGNAL_FRAME CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,PDA_STACKOFFSET CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/ /*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK SWAPGS_UNSAFE_STACK
...@@ -480,7 +480,7 @@ ENTRY(system_call) ...@@ -480,7 +480,7 @@ ENTRY(system_call)
ENTRY(system_call_after_swapgs) ENTRY(system_call_after_swapgs)
movq %rsp,%gs:pda_oldrsp movq %rsp,%gs:pda_oldrsp
movq %gs:pda_kernelstack,%rsp movq PER_CPU_VAR(kernel_stack),%rsp
/* /*
* No need to follow this irqs off/on section - it's straight * No need to follow this irqs off/on section - it's straight
* and short: * and short:
......
...@@ -620,9 +620,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) ...@@ -620,9 +620,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
write_pda(oldrsp, next->usersp); write_pda(oldrsp, next->usersp);
percpu_write(current_task, next_p); percpu_write(current_task, next_p);
write_pda(kernelstack, percpu_write(kernel_stack,
(unsigned long)task_stack_page(next_p) + (unsigned long)task_stack_page(next_p) +
THREAD_SIZE - PDA_STACKOFFSET); THREAD_SIZE - KERNEL_STACK_OFFSET);
#ifdef CONFIG_CC_STACKPROTECTOR #ifdef CONFIG_CC_STACKPROTECTOR
write_pda(stack_canary, next_p->stack_canary); write_pda(stack_canary, next_p->stack_canary);
/* /*
......
...@@ -798,6 +798,9 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) ...@@ -798,6 +798,9 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
#else #else
clear_tsk_thread_flag(c_idle.idle, TIF_FORK); clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
initial_gs = per_cpu_offset(cpu); initial_gs = per_cpu_offset(cpu);
per_cpu(kernel_stack, cpu) =
(unsigned long)task_stack_page(c_idle.idle) -
KERNEL_STACK_OFFSET + THREAD_SIZE;
#endif #endif
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary; initial_code = (unsigned long)start_secondary;
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <asm/processor-flags.h> #include <asm/processor-flags.h>
#include <asm/errno.h> #include <asm/errno.h>
#include <asm/segment.h> #include <asm/segment.h>
#include <asm/percpu.h>
#include <xen/interface/xen.h> #include <xen/interface/xen.h>
...@@ -28,12 +29,10 @@ ...@@ -28,12 +29,10 @@
#if 1 #if 1
/* /*
x86-64 does not yet support direct access to percpu variables FIXME: x86_64 now can support direct access to percpu variables
via a segment override, so we just need to make sure this code via a segment override. Update xen accordingly.
never gets used
*/ */
#define BUG ud2a #define BUG ud2a
#define PER_CPU_VAR(var, off) 0xdeadbeef
#endif #endif
/* /*
...@@ -45,14 +44,14 @@ ENTRY(xen_irq_enable_direct) ...@@ -45,14 +44,14 @@ ENTRY(xen_irq_enable_direct)
BUG BUG
/* Unmask events */ /* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/* Preempt here doesn't matter because that will deal with /* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */ run on the wrong CPU, but that doesn't hurt. */
/* Test for pending */ /* Test for pending */
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending) testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f jz 1f
2: call check_events 2: call check_events
...@@ -69,7 +68,7 @@ ENDPATCH(xen_irq_enable_direct) ...@@ -69,7 +68,7 @@ ENDPATCH(xen_irq_enable_direct)
ENTRY(xen_irq_disable_direct) ENTRY(xen_irq_disable_direct)
BUG BUG
movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
ENDPATCH(xen_irq_disable_direct) ENDPATCH(xen_irq_disable_direct)
ret ret
ENDPROC(xen_irq_disable_direct) ENDPROC(xen_irq_disable_direct)
...@@ -87,7 +86,7 @@ ENDPATCH(xen_irq_disable_direct) ...@@ -87,7 +86,7 @@ ENDPATCH(xen_irq_disable_direct)
ENTRY(xen_save_fl_direct) ENTRY(xen_save_fl_direct)
BUG BUG
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
setz %ah setz %ah
addb %ah,%ah addb %ah,%ah
ENDPATCH(xen_save_fl_direct) ENDPATCH(xen_save_fl_direct)
...@@ -107,13 +106,13 @@ ENTRY(xen_restore_fl_direct) ...@@ -107,13 +106,13 @@ ENTRY(xen_restore_fl_direct)
BUG BUG
testb $X86_EFLAGS_IF>>8, %ah testb $X86_EFLAGS_IF>>8, %ah
setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/* Preempt here doesn't matter because that will deal with /* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */ run on the wrong CPU, but that doesn't hurt. */
/* check for unmasked and pending */ /* check for unmasked and pending */
cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending) cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f jz 1f
2: call check_events 2: call check_events
1: 1:
...@@ -196,7 +195,7 @@ ENTRY(xen_sysret64) ...@@ -196,7 +195,7 @@ ENTRY(xen_sysret64)
/* We're already on the usermode stack at this point, but still /* We're already on the usermode stack at this point, but still
with the kernel gs, so we can easily switch back */ with the kernel gs, so we can easily switch back */
movq %rsp, %gs:pda_oldrsp movq %rsp, %gs:pda_oldrsp
movq %gs:pda_kernelstack,%rsp movq PER_CPU_VAR(kernel_stack),%rsp
pushq $__USER_DS pushq $__USER_DS
pushq %gs:pda_oldrsp pushq %gs:pda_oldrsp
...@@ -213,7 +212,7 @@ ENTRY(xen_sysret32) ...@@ -213,7 +212,7 @@ ENTRY(xen_sysret32)
/* We're already on the usermode stack at this point, but still /* We're already on the usermode stack at this point, but still
with the kernel gs, so we can easily switch back */ with the kernel gs, so we can easily switch back */
movq %rsp, %gs:pda_oldrsp movq %rsp, %gs:pda_oldrsp
movq %gs:pda_kernelstack, %rsp movq PER_CPU_VAR(kernel_stack), %rsp
pushq $__USER32_DS pushq $__USER32_DS
pushq %gs:pda_oldrsp pushq %gs:pda_oldrsp
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册