提交 99fb079a 编写于 作者: M Mauro Carvalho Chehab

[media] saa7134: Properly report when a board doesn't have eeprom

When a device is not detected, the driver prints a warning message.
That's ok, except for the fact that, even on newer devices that have
eeprom but aren't yet supported, it prints a message saying that the
device doesn't have eeprom.

Fix it by having a separate message for devices with eeprom, but not
yet known by the driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 0cda1255
......@@ -752,19 +752,28 @@ static int saa7134_hwfini(struct saa7134_dev *dev)
return 0;
}
static void __devinit must_configure_manually(void)
static void __devinit must_configure_manually(int has_eeprom)
{
unsigned int i,p;
printk(KERN_WARNING
"saa7134: <rant>\n"
"saa7134: Congratulations! Your TV card vendor saved a few\n"
"saa7134: cents for a eeprom, thus your pci board has no\n"
"saa7134: subsystem ID and I can't identify it automatically\n"
"saa7134: </rant>\n"
"saa7134: I feel better now. Ok, here are the good news:\n"
"saa7134: You can use the card=<nr> insmod option to specify\n"
"saa7134: which board do you have. The list:\n");
if (!has_eeprom)
printk(KERN_WARNING
"saa7134: <rant>\n"
"saa7134: Congratulations! Your TV card vendor saved a few\n"
"saa7134: cents for a eeprom, thus your pci board has no\n"
"saa7134: subsystem ID and I can't identify it automatically\n"
"saa7134: </rant>\n"
"saa7134: I feel better now. Ok, here are the good news:\n"
"saa7134: You can use the card=<nr> insmod option to specify\n"
"saa7134: which board do you have. The list:\n");
else
printk(KERN_WARNING
"saa7134: Board is currently unknown. You might try to use the card=<nr>\n"
"saa7134: insmod option to specify which board do you have, but this is\n"
"saa7134: somewhat risky, as might damage your card. It is better to ask\n"
"saa7134: for support at linux-media@vger.kernel.org.\n"
"saa7134: The supported cards are:\n");
for (i = 0; i < saa7134_bcount; i++) {
printk(KERN_WARNING "saa7134: card=%d -> %-40.40s",
i,saa7134_boards[i].name);
......@@ -936,8 +945,10 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
if (card[dev->nr] >= 0 &&
card[dev->nr] < saa7134_bcount)
dev->board = card[dev->nr];
if (SAA7134_BOARD_NOAUTO == dev->board) {
must_configure_manually();
if (SAA7134_BOARD_UNKNOWN == dev->board)
must_configure_manually(0);
else if (SAA7134_BOARD_NOAUTO == dev->board) {
must_configure_manually(1);
dev->board = SAA7134_BOARD_UNKNOWN;
}
dev->autodetected = card[dev->nr] != dev->board;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册