[PATCH] radeonfb sleep fixes

Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw
too much power when suspended to RAM, reducing drastically the battery
lifetime.  The solution is to enable suspend-to-D2 on these machines.  They
are whitelisted through their subsystem vendor/device ID.  This fixes
http://bugzilla.kernel.org/show_bug.cgi?id=3022

The patch introduces a framework to alter the pm_mode and reinit_func fields
of the radeonfb_info structure based on a whitelist.  This should facilitate
future hardware-dependent workarounds.  The workaround for the Samsung P35
that is already in the radeonfb code has been rewritten using this framework.

The behavior can be overridden with module options:

i)  video=radeonfb:force_sleep=1
    enable suspend-to-D2 also on non-whitelisted machines (useful for
    testing new notebook models),

ii) video=radeonfb:ignore_devlist=1
    Disable checking the whitelist and do not apply any workarounds.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/video/aty/radeon_base.c

@@ -266,6 +266,8 @@ static int force_measure_pll = 0;
 #ifdef CONFIG_MTRR
 static int nomtrr = 0;
 #endif
+static int force_sleep;
+static int ignore_devlist;
 
 /*
  * prototypes
@@ -2327,9 +2329,9 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 		/* -2 is special: means  ON on mobility chips and do not
 		 * change on others
 		 */
-		radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1);
+		radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1, ignore_devlist, force_sleep);
 	} else
-		radeonfb_pm_init(rinfo, default_dynclk);
+		radeonfb_pm_init(rinfo, default_dynclk, ignore_devlist, force_sleep);
 
 	pci_set_drvdata(pdev, info);
 
@@ -2477,6 +2479,12 @@ static int __init radeonfb_setup (char *options)
 			force_measure_pll = 1;
 		} else if (!strncmp(this_opt, "ignore_edid", 11)) {
 			ignore_edid = 1;
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+	 	} else if (!strncmp(this_opt, "force_sleep", 11)) {
+			force_sleep = 1;
+		} else if (!strncmp(this_opt, "ignore_devlist", 14)) {
+			ignore_devlist = 1;
+#endif
 		} else
 			mode_option = this_opt;
 	}
@@ -2532,3 +2540,9 @@ module_param(panel_yres, int, 0);
 MODULE_PARM_DESC(panel_yres, "int: set panel yres");
 module_param(mode_option, charp, 0);
 MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+module_param(force_sleep, bool, 0);
+MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware");
+module_param(ignore_devlist, bool, 0);
+MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops");
+#endif

drivers/video/aty/radeon_pm.c

@@ -27,6 +27,99 @@
 
 #include "ati_ids.h"
 
+static void radeon_reinitialize_M10(struct radeonfb_info *rinfo);
+
+/*
+ * Workarounds for bugs in PC laptops:
+ * - enable D2 sleep in some IBM Thinkpads
+ * - special case for Samsung P35
+ *
+ * Whitelist by subsystem vendor/device because
+ * its the subsystem vendor's fault!
+ */
+
+#if defined(CONFIG_PM) && defined(CONFIG_X86)
+struct radeon_device_id {
+        const char *ident;                     /* (arbitrary) Name */
+        const unsigned short subsystem_vendor; /* Subsystem Vendor ID */
+        const unsigned short subsystem_device; /* Subsystem Device ID */
+	const enum radeon_pm_mode pm_mode_modifier; /* modify pm_mode */
+	const reinit_function_ptr new_reinit_func;   /* changed reinit_func */
+};
+
+#define BUGFIX(model, sv, sd, pm, fn) { \
+	.ident = model, \
+	.subsystem_vendor = sv, \
+	.subsystem_device = sd, \
+	.pm_mode_modifier = pm, \
+	.new_reinit_func  = fn  \
+}
+
+static struct radeon_device_id radeon_workaround_list[] = {
+	BUGFIX("IBM Thinkpad R32",
+	       PCI_VENDOR_ID_IBM, 0x1905,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad R40",
+	       PCI_VENDOR_ID_IBM, 0x0526,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad R40",
+	       PCI_VENDOR_ID_IBM, 0x0527,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad R50/R51/T40/T41",
+	       PCI_VENDOR_ID_IBM, 0x0531,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad R51/T40/T41/T42",
+	       PCI_VENDOR_ID_IBM, 0x0530,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad T30",
+	       PCI_VENDOR_ID_IBM, 0x0517,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad T40p",
+	       PCI_VENDOR_ID_IBM, 0x054d,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad T42",
+	       PCI_VENDOR_ID_IBM, 0x0550,
+	       radeon_pm_d2, NULL),
+	BUGFIX("IBM Thinkpad X31/X32",
+	       PCI_VENDOR_ID_IBM, 0x052f,
+	       radeon_pm_d2, NULL),
+	BUGFIX("Samsung P35",
+	       PCI_VENDOR_ID_SAMSUNG, 0xc00c,
+	       radeon_pm_off, radeon_reinitialize_M10),
+	{ .ident = NULL }
+};
+
+static int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+	struct radeon_device_id *id;
+
+	for (id = radeon_workaround_list; id->ident != NULL; id++ )
+		if ((id->subsystem_vendor == rinfo->pdev->subsystem_vendor ) &&
+		    (id->subsystem_device == rinfo->pdev->subsystem_device )) {
+
+			/* we found a device that requires workaround */
+			printk(KERN_DEBUG "radeonfb: %s detected"
+			       ", enabling workaround\n", id->ident);
+
+			rinfo->pm_mode |= id->pm_mode_modifier;
+
+			if (id->new_reinit_func != NULL)
+				rinfo->reinit_func = id->new_reinit_func;
+
+			return 1;
+		}
+	return 0;  /* not found */
+}
+
+#else  /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+static inline int radeon_apply_workarounds(struct radeonfb_info *rinfo)
+{
+        return 0;
+}
+#endif /* defined(CONFIG_PM) && defined(CONFIG_X86) */
+
+
+
 static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
 {
 	u32 tmp;
@@ -852,18 +945,26 @@ static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
 	/* because both INPLL and OUTPLL take the same lock, that's why. */
 	tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND;
 	OUTPLL( pllMCLK_MISC, tmp);
-	
-	/* AGP PLL control */
-	if (rinfo->family <= CHIP_FAMILY_RV280) {
-		OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
 
-		OUTREG(BUS_CNTL1,
-		       (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
-		       | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));	// 440BX
-	} else {
-		OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
-		OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+	/* BUS_CNTL1__MOBILE_PLATORM_SEL setting is northbridge chipset
+	 * and radeon chip dependent. Thus we only enable it on Mac for
+	 * now (until we get more info on how to compute the correct
+	 * value for various X86 bridges).
+	 */
+#ifdef CONFIG_PPC_PMAC
+	if (machine_is(powermac)) {
+		/* AGP PLL control */
+		if (rinfo->family <= CHIP_FAMILY_RV280) {
+			OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) |  BUS_CNTL1__AGPCLK_VALID);
+			OUTREG(BUS_CNTL1,
+			       (INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
+			       | (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT));	// 440BX
+		} else {
+			OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
+			OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
+		}
 	}
+#endif
 
 	OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL)
 				  & ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN));
@@ -2713,7 +2814,7 @@ static void radeonfb_early_resume(void *data)
 
 #endif /* CONFIG_PM */
 
-void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
+void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep)
 {
 	/* Find PM registers in config space if any*/
 	rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
@@ -2729,22 +2830,13 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
 	}
 
 #if defined(CONFIG_PM)
+#if defined(CONFIG_PPC_PMAC)
 	/* Check if we can power manage on suspend/resume. We can do
 	 * D2 on M6, M7 and M9, and we can resume from D3 cold a few other
 	 * "Mac" cards, but that's all. We need more infos about what the
 	 * BIOS does tho. Right now, all this PM stuff is pmac-only for that
 	 * reason. --BenH
 	 */
-	/* Special case for Samsung P35 laptops
-	 */
-	if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) &&
-	    (rinfo->pdev->device == PCI_CHIP_RV350_NP) &&
-	    (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) &&
-	    (rinfo->pdev->subsystem_device == 0xc00c)) {
-		rinfo->reinit_func = radeon_reinitialize_M10;
-		rinfo->pm_mode |= radeon_pm_off;
-	}
-#if defined(CONFIG_PPC_PMAC)
 	if (machine_is(powermac) && rinfo->of_node) {
 		if (rinfo->is_mobility && rinfo->pm_reg &&
 		    rinfo->family <= CHIP_FAMILY_RV250)
@@ -2790,6 +2882,18 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
 	}
 #endif /* defined(CONFIG_PPC_PMAC) */
 #endif /* defined(CONFIG_PM) */
+
+	if (ignore_devlist)
+		printk(KERN_DEBUG
+		       "radeonfb: skipping test for device workarounds\n");
+	else
+		radeon_apply_workarounds(rinfo);
+
+	if (force_sleep) {
+		printk(KERN_DEBUG
+		       "radeonfb: forcefully enabling D2 sleep mode\n");
+		rinfo->pm_mode |= radeon_pm_d2;
+	}
 }
 
 void radeonfb_pm_exit(struct radeonfb_info *rinfo)

drivers/video/aty/radeonfb.h

@@ -273,6 +273,8 @@ enum radeon_pm_mode {
 	radeon_pm_off	= 0x00000002,	/* Can resume from D3 cold */
 };
 
+typedef void (*reinit_function_ptr)(struct radeonfb_info *rinfo);
+
 struct radeonfb_info {
 	struct fb_info		*info;
 
@@ -338,7 +340,7 @@ struct radeonfb_info {
 	int			dynclk;
 	int			no_schedule;
 	enum radeon_pm_mode	pm_mode;
-	void			(*reinit_func)(struct radeonfb_info *rinfo);
+	reinit_function_ptr     reinit_func;
 
 	/* Lock on register access */
 	spinlock_t		reg_lock;
@@ -600,7 +602,7 @@ extern int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn, u8
 /* PM Functions */
 extern int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state);
 extern int radeonfb_pci_resume(struct pci_dev *pdev);
-extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk);
+extern void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlist, int force_sleep);
 extern void radeonfb_pm_exit(struct radeonfb_info *rinfo);
 
 /* Monitor probe functions */