提交 99464293 编写于 作者: E Eric Miao

[ARM] pxa: move power I2C device definitions into devices.c

Let's put these devices into a central place even if they are now
processor specific, as they might be re-used in later processors.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 e8a5ab1f
......@@ -261,6 +261,48 @@ void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
pxa_register_device(&pxa_device_i2c, info);
}
#ifdef CONFIG_PXA27x
static struct resource pxa27x_resources_i2c_power[] = {
{
.start = 0x40f00180,
.end = 0x40f001a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = pxa27x_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power),
};
#endif
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_resources_i2c_power[] = {
{
.start = 0x40f500c0,
.end = 0x40f500d3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = pxa3xx_resources_i2c_power,
.num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
};
#endif
static struct resource pxai2s_resources[] = {
{
.start = 0x40400000,
......
......@@ -319,26 +319,6 @@ void __init pxa27x_init_irq(void)
/*
* device registration specific to PXA27x.
*/
static struct resource i2c_power_resources[] = {
{
.start = 0x40f00180,
.end = 0x40f001a3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa27x_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = i2c_power_resources,
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
local_irq_disable();
......
......@@ -529,25 +529,6 @@ void __init pxa3xx_init_irq(void)
* device registration specific to PXA3xx.
*/
static struct resource i2c_power_resources[] = {
{
.start = 0x40f500c0,
.end = 0x40f500d3,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_PWRI2C,
.end = IRQ_PWRI2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device pxa3xx_device_i2c_power = {
.name = "pxa2xx-i2c",
.id = 1,
.resource = i2c_power_resources,
.num_resources = ARRAY_SIZE(i2c_power_resources),
};
void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
pxa3xx_device_i2c_power.dev.platform_data = info;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册