提交 99405f93 编写于 作者: S Sujith 提交者: John W. Linville

ath9k: Use proper TX channel width for setting channels

The TX channel width of the BSS can be obtained only after association.
In all cases, default to HT20 if HT is enabled, and set
chan width to HT40 only if the BSS supports it.
Signed-off-by: NSujith <Sujith.Manoharan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 ff37e337
......@@ -633,11 +633,6 @@ enum PROT_MODE {
PROT_M_CTSONLY
};
struct ath_ht_info {
enum ath9k_ht_macmode tx_chan_width;
u8 ext_chan_offset;
};
#define SC_OP_INVALID BIT(0)
#define SC_OP_BEACONS BIT(1)
#define SC_OP_RXAGGR BIT(2)
......@@ -691,8 +686,8 @@ struct ath_softc {
u8 sc_rxotherant; /* rx's on non-default antenna */
struct ath9k_node_stats sc_halstats; /* station-mode rssi stats */
struct ath_ht_info sc_ht_info;
enum ath9k_ht_extprotspacing sc_ht_extprotspacing;
enum ath9k_ht_macmode tx_chan_width;
#ifdef CONFIG_SLOW_ANT_DIV
struct ath_antdiv sc_antdiv;
......
......@@ -2232,8 +2232,7 @@ bool ath9k_hw_reset(struct ath_hal *ah, struct ath9k_channel *chan,
((chan->channelFlags & CHANNEL_ALL) ==
(ah->ah_curchan->channelFlags & CHANNEL_ALL)) &&
(!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
!IS_CHAN_A_5MHZ_SPACED(ah->
ah_curchan)))) {
!IS_CHAN_A_5MHZ_SPACED(ah->ah_curchan)))) {
if (ath9k_hw_channel_change(ah, chan, macmode)) {
ath9k_hw_loadnf(ah, ah->ah_curchan);
......
......@@ -260,15 +260,6 @@ static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
if (sc->sc_flags & SC_OP_INVALID)
return -EIO;
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
__func__,
ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel,
sc->sc_ah->ah_curchan->channelFlags),
sc->sc_ah->ah_curchan->channel,
ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
hchan->channel, hchan->channelFlags);
if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
(sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
......@@ -294,8 +285,14 @@ static int ath_set_channel(struct ath_softc *sc, struct ath9k_channel *hchan)
if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
fastcc = false;
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: (%u MHz) -> (%u MHz), cflags:%x, chanwidth: %d\n",
__func__,
sc->sc_ah->ah_curchan->channel,
hchan->channel, hchan->channelFlags, sc->tx_chan_width);
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah, hchan, sc->sc_ht_info.tx_chan_width,
if (!ath9k_hw_reset(ah, hchan, sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, fastcc, &status)) {
DPRINTF(sc, ATH_DBG_FATAL,
......@@ -626,11 +623,13 @@ static int ath_get_channel(struct ath_softc *sc,
}
static u32 ath_get_extchanmode(struct ath_softc *sc,
struct ieee80211_channel *chan)
struct ieee80211_channel *chan,
struct ieee80211_bss_conf *bss_conf)
{
u32 chanmode = 0;
u8 ext_chan_offset = sc->sc_ht_info.ext_chan_offset;
enum ath9k_ht_macmode tx_chan_width = sc->sc_ht_info.tx_chan_width;
u8 ext_chan_offset = bss_conf->ht.secondary_channel_offset;
enum ath9k_ht_macmode tx_chan_width = (bss_conf->ht.width_40_ok) ?
ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20;
switch (chan->band) {
case IEEE80211_BAND_2GHZ:
......@@ -828,17 +827,17 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
static void ath9k_ht_conf(struct ath_softc *sc,
struct ieee80211_bss_conf *bss_conf)
{
struct ath_ht_info *ht_info = &sc->sc_ht_info;
if (sc->hw->conf.ht.enabled) {
ht_info->ext_chan_offset = bss_conf->ht.secondary_channel_offset;
if (bss_conf->ht.width_40_ok)
ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
else
ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width);
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: BSS Changed HT, chanwidth: %d\n",
__func__, sc->tx_chan_width);
}
}
......@@ -892,26 +891,30 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
return;
}
if (hw->conf.ht.enabled)
if (hw->conf.ht.enabled) {
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan);
else
ath_get_extchanmode(sc, curchan, bss_conf);
if (bss_conf->ht.width_40_ok)
sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
else
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
} else {
sc->sc_ah->ah_channels[pos].chanmode =
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
}
/* set h/w channel */
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
DPRINTF(sc, ATH_DBG_FATAL,
"%s: Unable to set channel\n",
__func__);
"%s: Unable to set channel\n", __func__);
/* Start ANI */
mod_timer(&sc->sc_ani.timer,
jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
} else {
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: Bss Info DISSOC\n", __func__);
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info DISSOC\n", __func__);
sc->sc_curaid = 0;
}
}
......@@ -1044,7 +1047,7 @@ static void ath_radio_enable(struct ath_softc *sc)
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah, ah->ah_curchan,
sc->sc_ht_info.tx_chan_width,
sc->tx_chan_width,
sc->sc_tx_chainmask,
sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing,
......@@ -1102,7 +1105,7 @@ static void ath_radio_disable(struct ath_softc *sc)
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah, ah->ah_curchan,
sc->sc_ht_info.tx_chan_width,
sc->tx_chan_width,
sc->sc_tx_chainmask,
sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing,
......@@ -1636,7 +1639,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan,
sc->sc_ht_info.tx_chan_width,
sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, false, &status)) {
DPRINTF(sc, ATH_DBG_FATAL,
......@@ -1864,8 +1867,6 @@ static int ath9k_start(struct ieee80211_hw *hw)
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with "
"initial channel: %d MHz\n", __func__, curchan->center_freq);
memset(&sc->sc_ht_info, 0, sizeof(struct ath_ht_info));
/* setup initial channel */
pos = ath_get_channel(sc, curchan);
......@@ -1875,6 +1876,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
goto error;
}
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
sc->sc_ah->ah_channels[pos].chanmode =
(curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A;
init_channel = &sc->sc_ah->ah_channels[pos];
......@@ -1891,7 +1893,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
*/
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(sc->sc_ah, init_channel,
sc->sc_ht_info.tx_chan_width,
sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, false, &status)) {
DPRINTF(sc, ATH_DBG_FATAL,
......@@ -2149,39 +2151,37 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ieee80211_channel *curchan = hw->conf.channel;
struct ieee80211_conf *conf = &hw->conf;
int pos;
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
__func__,
curchan->center_freq);
/* Update chainmask */
ath_update_chainmask(sc, conf->ht.enabled);
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
struct ieee80211_channel *curchan = hw->conf.channel;
int pos;
pos = ath_get_channel(sc, curchan);
if (pos == -1) {
DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
return -EINVAL;
}
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
__func__, curchan->center_freq);
sc->sc_ah->ah_channels[pos].chanmode =
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
pos = ath_get_channel(sc, curchan);
if (pos == -1) {
DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
return -EINVAL;
}
if (sc->sc_curaid && hw->conf.ht.enabled)
sc->tx_chan_width = ATH9K_HT_MACMODE_20;
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan);
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
DPRINTF(sc, ATH_DBG_FATAL,
"%s: Unable to set channel\n", __func__);
}
if (changed & IEEE80211_CONF_CHANGE_HT)
ath_update_chainmask(sc, conf->ht.enabled);
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->sc_config.txpowlimit = 2 * conf->power_level;
/* set h/w channel */
if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0)
DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n",
__func__);
return 0;
}
......@@ -2421,11 +2421,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
}
if (changed & BSS_CHANGED_HT) {
DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT\n",
__func__);
if (changed & BSS_CHANGED_HT)
ath9k_ht_conf(sc, bss_conf);
}
if (changed & BSS_CHANGED_ASSOC) {
DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n",
......
......@@ -1148,7 +1148,7 @@ static void ath_drain_txdataq(struct ath_softc *sc, bool retry_tx)
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah,
sc->sc_ah->ah_curchan,
sc->sc_ht_info.tx_chan_width,
sc->tx_chan_width,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, true, &status)) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册