提交 989d873f 编写于 作者: L Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pxa: fix page table corruption on resume
  ARM: it8152: add IT8152_LAST_IRQ definition to fix build error
  ARM: pxa: PXA_ESERIES depends on FB_W100.
  ARM: 6605/1: Add missing include "asm/memory.h"
  ARM: 6540/1: Stop irqsoff trace on return to user
  ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers
  ARM: 6536/1: Add missing SZ_{32,64,128}
  ARM: fix cache-feroceon-l2 after stack based kmap_atomic()
  ARM: fix cache-xsc3l2 after stack based kmap_atomic()
  ARM: get rid of kmap_high_l1_vipt()
  ARM: smp: avoid incrementing mm_users on CPU startup
  ARM: pxa: PXA_ESERIES depends on FB_W100.
......@@ -792,11 +792,14 @@ S: Maintained
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
M: Linus Walleij <linus.walleij@stericsson.com>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
F: drivers/i2c/busses/i2c-nomadik.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
......@@ -998,12 +1001,24 @@ F: drivers/i2c/busses/i2c-stu300.c
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
F: drivers/dma/coh901318*
F: drivers/mfd/ab3100*
F: drivers/rtc/rtc-ab3100.c
F: drivers/rtc/rtc-coh901331.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/U8500 ARM ARCHITECTURE
ARM/Ux500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
M: Linus Walleij <linus.walleij@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ux500/
F: drivers/dma/ste_dma40*
F: drivers/mfd/ab3550*
F: drivers/mfd/abx500*
F: drivers/mfd/ab8500*
F: drivers/mfd/stmpe*
F: drivers/rtc/rtc-ab8500.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
......
......@@ -76,6 +76,7 @@ extern unsigned long it8152_base_address;
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40)
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
......
......@@ -25,9 +25,6 @@ extern void *kmap_high(struct page *page);
extern void *kmap_high_get(struct page *page);
extern void kunmap_high(struct page *page);
extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
/*
* The following functions are already defined by <linux/highmem.h>
* when CONFIG_HIGHMEM is not set.
......
......@@ -13,9 +13,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* DO NOT EDIT!! - this file automatically generated
* from .s file by awk -f s2h.awk
*/
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
......@@ -25,6 +22,9 @@
/* handy sizes */
#define SZ_16 0x00000010
#define SZ_32 0x00000020
#define SZ_64 0x00000040
#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
......
......@@ -150,6 +150,7 @@ extern unsigned int user_debug;
#define rmb() dmb()
#define wmb() mb()
#else
#include <asm/memory.h>
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
......
......@@ -29,6 +29,9 @@ ret_fast_syscall:
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
#if defined(CONFIG_IRQSOFF_TRACER)
asm_trace_hardirqs_on
#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
......@@ -65,6 +68,9 @@ ret_slow_syscall:
tst r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
#if defined(CONFIG_IRQSOFF_TRACER)
asm_trace_hardirqs_on
#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
......
......@@ -310,7 +310,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
......
......@@ -540,6 +540,7 @@ config MACH_ICONTROL
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
select FB_W100
config MACH_E330
bool "Toshiba e330"
......
......@@ -353,8 +353,8 @@ resume_turn_on_mmu:
@ Let us ensure we jump to resume_after_mmu only when the mcr above
@ actually took effect. They call it the "cpwait" operation.
mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15
sub pc, r2, r1, lsr #32 @ jump to virtual addr
mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
sub pc, r2, r0, lsr #32 @ jump to virtual addr
nop
nop
nop
......
......@@ -13,13 +13,9 @@
*/
#include <linux/init.h>
#include <linux/highmem.h>
#include <asm/cacheflush.h>
#include <asm/kmap_types.h>
#include <asm/fixmap.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <plat/cache-feroceon-l2.h>
#include "mm.h"
/*
* Low-level cache maintenance operations.
......@@ -39,27 +35,30 @@
* between which we don't want to be preempted.
*/
static inline unsigned long l2_start_va(unsigned long paddr)
static inline unsigned long l2_get_va(unsigned long paddr)
{
#ifdef CONFIG_HIGHMEM
/*
* Let's do our own fixmap stuff in a minimal way here.
* Because range ops can't be done on physical addresses,
* we simply install a virtual mapping for it only for the
* TLB lookup to occur, hence no need to flush the untouched
* memory mapping. This is protected with the disabling of
* interrupts by the caller.
* memory mapping afterwards (note: a cache flush may happen
* in some circumstances depending on the path taken in kunmap_atomic).
*/
unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
local_flush_tlb_kernel_page(vaddr);
return vaddr + (paddr & ~PAGE_MASK);
void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
#else
return __phys_to_virt(paddr);
#endif
}
static inline void l2_put_va(unsigned long vaddr)
{
#ifdef CONFIG_HIGHMEM
kunmap_atomic((void *)vaddr);
#endif
}
static inline void l2_clean_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
......@@ -76,13 +75,14 @@ static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
va_start = l2_start_va(start);
va_start = l2_get_va(start);
va_end = va_start + (end - start);
raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
"mcr p15, 1, %1, c15, c9, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
l2_put_va(va_start);
}
static inline void l2_clean_inv_pa(unsigned long addr)
......@@ -106,13 +106,14 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
raw_local_irq_save(flags);
va_start = l2_start_va(start);
va_start = l2_get_va(start);
va_end = va_start + (end - start);
raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
"mcr p15, 1, %1, c15, c11, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
l2_put_va(va_start);
}
static inline void l2_inv_all(void)
......
......@@ -17,14 +17,10 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
#include <asm/kmap_types.h>
#include <asm/fixmap.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include "mm.h"
#define CR_L2 (1 << 26)
......@@ -71,16 +67,15 @@ static inline void xsc3_l2_inv_all(void)
dsb();
}
static inline void l2_unmap_va(unsigned long va)
{
#ifdef CONFIG_HIGHMEM
#define l2_map_save_flags(x) raw_local_save_flags(x)
#define l2_map_restore_flags(x) raw_local_irq_restore(x)
#else
#define l2_map_save_flags(x) ((x) = 0)
#define l2_map_restore_flags(x) ((void)(x))
if (va != -1)
kunmap_atomic((void *)va);
#endif
}
static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
unsigned long flags)
static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
{
#ifdef CONFIG_HIGHMEM
unsigned long va = prev_va & PAGE_MASK;
......@@ -89,17 +84,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
/*
* Switching to a new page. Because cache ops are
* using virtual addresses only, we must put a mapping
* in place for it. We also enable interrupts for a
* short while and disable them again to protect this
* mapping.
* in place for it.
*/
unsigned long idx;
raw_local_irq_restore(flags);
idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
raw_local_irq_restore(flags | PSR_I_BIT);
set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
local_flush_tlb_kernel_page(va);
l2_unmap_va(prev_va);
va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
}
return va + (pa_offset >> (32 - PAGE_SHIFT));
#else
......@@ -109,7 +97,7 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
......@@ -117,13 +105,12 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
}
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
......@@ -133,7 +120,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
* Invalidate all full cache lines between 'start' and 'end'.
*/
while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
vaddr = l2_map_va(start, vaddr, flags);
vaddr = l2_map_va(start, vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
......@@ -142,31 +129,30 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
* Clean and invalidate partial last cache line.
*/
if (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
}
l2_map_restore_flags(flags);
l2_unmap_va(vaddr);
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
unsigned long vaddr;
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
start += CACHE_LINE_SIZE;
}
l2_map_restore_flags(flags);
l2_unmap_va(vaddr);
dsb();
}
......@@ -193,7 +179,7 @@ static inline void xsc3_l2_flush_all(void)
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
......@@ -201,17 +187,16 @@ static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
}
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
l2_map_restore_flags(flags);
l2_unmap_va(vaddr);
dsb();
}
......
......@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
#include <asm/memory.h>
#include <asm/highmem.h>
......@@ -480,10 +481,10 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
op(vaddr, len, dir);
kunmap_high(page);
} else if (cache_is_vipt()) {
pte_t saved_pte;
vaddr = kmap_high_l1_vipt(page, &saved_pte);
/* unmapped pages might still be cached */
vaddr = kmap_atomic(page);
op(vaddr + offset, len, dir);
kunmap_high_l1_vipt(page, saved_pte);
kunmap_atomic(vaddr);
}
} else {
vaddr = page_address(page) + offset;
......
......@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
......@@ -180,10 +181,10 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high(page);
} else if (cache_is_vipt()) {
pte_t saved_pte;
addr = kmap_high_l1_vipt(page, &saved_pte);
/* unmapped pages might still be cached */
addr = kmap_atomic(page);
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high_l1_vipt(page, saved_pte);
kunmap_atomic(addr);
}
}
......
......@@ -140,90 +140,3 @@ struct page *kmap_atomic_to_page(const void *ptr)
pte = TOP_PTE(vaddr);
return pte_page(*pte);
}
#ifdef CONFIG_CPU_CACHE_VIPT
#include <linux/percpu.h>
/*
* The VIVT cache of a highmem page is always flushed before the page
* is unmapped. Hence unmapped highmem pages need no cache maintenance
* in that case.
*
* However unmapped pages may still be cached with a VIPT cache, and
* it is not possible to perform cache maintenance on them using physical
* addresses unfortunately. So we have no choice but to set up a temporary
* virtual mapping for that purpose.
*
* Yet this VIPT cache maintenance may be triggered from DMA support
* functions which are possibly called from interrupt context. As we don't
* want to keep interrupt disabled all the time when such maintenance is
* taking place, we therefore allow for some reentrancy by preserving and
* restoring the previous fixmap entry before the interrupted context is
* resumed. If the reentrancy depth is 0 then there is no need to restore
* the previous fixmap, and leaving the current one in place allow it to
* be reused the next time without a TLB flush (common with DMA).
*/
static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
{
unsigned int idx, cpu;
int *depth;
unsigned long vaddr, flags;
pte_t pte, *ptep;
if (!in_interrupt())
preempt_disable();
cpu = smp_processor_id();
depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
ptep = TOP_PTE(vaddr);
pte = mk_pte(page, kmap_prot);
raw_local_irq_save(flags);
(*depth)++;
if (pte_val(*ptep) == pte_val(pte)) {
*saved_pte = pte;
} else {
*saved_pte = *ptep;
set_pte_ext(ptep, pte, 0);
local_flush_tlb_kernel_page(vaddr);
}
raw_local_irq_restore(flags);
return (void *)vaddr;
}
void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
{
unsigned int idx, cpu = smp_processor_id();
int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
unsigned long vaddr, flags;
pte_t pte, *ptep;
idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
ptep = TOP_PTE(vaddr);
pte = mk_pte(page, kmap_prot);
BUG_ON(pte_val(*ptep) != pte_val(pte));
BUG_ON(*depth <= 0);
raw_local_irq_save(flags);
(*depth)--;
if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
set_pte_ext(ptep, saved_pte, 0);
local_flush_tlb_kernel_page(vaddr);
}
raw_local_irq_restore(flags);
if (!in_interrupt())
preempt_enable();
}
#endif /* CONFIG_CPU_CACHE_VIPT */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册