ATA: sata_mv: Add device tree support

Add support for instantiating this driver from device tree, and add
the necassary DT information to the kirkwood.dtsi file.

This is based on previous work by Michael Walle and Jason Cooper.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NJosh Coombs <josh.coombs@gmail.com>

Documentation/devicetree/bindings/ata/marvell.txt

+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		nr-ports = <2>;
+	}

arch/arm/boot/dts/kirkwood.dtsi

@@ -76,6 +76,13 @@
 			status = "okay";
 		};
 
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
 		nand@3000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/mach-kirkwood/board-dt.c

@@ -31,6 +31,7 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
 		       NULL),
 	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
 	{},
 };
 

drivers/ata/sata_mv.c

@@ -65,6 +65,8 @@
 #include <linux/mbus.h>
 #include <linux/bitops.h>
 #include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -4026,7 +4028,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
 	struct resource *res;
-	int n_ports = 0;
+	int n_ports = 0, irq = 0;
 	int rc;
 #if defined(CONFIG_HAVE_CLK)
 	int port;
@@ -4050,8 +4052,14 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	/* allocate host */
-	mv_platform_data = pdev->dev.platform_data;
-	n_ports = mv_platform_data->n_ports;
+	if (pdev->dev.of_node) {
+		of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports);
+		irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	} else {
+		mv_platform_data = pdev->dev.platform_data;
+		n_ports = mv_platform_data->n_ports;
+		irq = platform_get_irq(pdev, 0);
+	}
 
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
@@ -4109,8 +4117,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "slots %u ports %d\n",
 		 (unsigned)MV_MAX_Q_DEPTH, host->n_ports);
 
-	rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
-			       IRQF_SHARED, &mv6_sht);
+	rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht);
 	if (!rc)
 		return 0;
 
@@ -4205,15 +4212,24 @@ static int mv_platform_resume(struct platform_device *pdev)
 #define mv_platform_resume NULL
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id mv_sata_dt_ids[] __devinitdata = {
+	{ .compatible = "marvell,orion-sata", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mv_sata_dt_ids);
+#endif
+
 static struct platform_driver mv_platform_driver = {
-	.probe			= mv_platform_probe,
-	.remove			= __devexit_p(mv_platform_remove),
-	.suspend		= mv_platform_suspend,
-	.resume			= mv_platform_resume,
-	.driver			= {
-				   .name = DRV_NAME,
-				   .owner = THIS_MODULE,
-				  },
+	.probe		= mv_platform_probe,
+	.remove		= __devexit_p(mv_platform_remove),
+	.suspend	= mv_platform_suspend,
+	.resume		= mv_platform_resume,
+	.driver		= {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(mv_sata_dt_ids),
+	},
 };