提交 97a229f9 编写于 作者: L Linus Torvalds

Merge tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time we fairly boring and bit small update.

   - Support for Intel iDMA 32-bit hardware
   - deprecate broken support for channel switching in async_tx
   - bunch of updates on stm32-dma
   - Cyclic support for zx dma and making in generic zx dma driver
   - Small updates to bunch of other drivers"

* tag 'dmaengine-4.11-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
  async_tx: deprecate broken support for channel switching
  dmaengine: rcar-dmac: Widen DMA mask to 40 bits
  dmaengine: sun6i: allow build on ARM64 platforms (sun50i)
  dmaengine: Provide a wrapper for memcpy operations
  dmaengine: zx: fix build warning
  dmaengine: dw: we do support Merrifield SoC in PCI mode
  dmaengine: dw: add support of iDMA 32-bit hardware
  dmaengine: dw: introduce register mappings for iDMA 32-bit
  dmaengine: dw: introduce block2bytes() and bytes2block()
  dmaengine: dw: extract dwc_chan_pause() for future use
  dmaengine: dw: replace convert_burst() with one liner
  dmaengine: dw: register IRQ and DMA pool with instance ID
  dmaengine: dw: Fix data corruption in large device to memory transfers
  dmaengine: ste_dma40: indicate granularity on channels
  dmaengine: ste_dma40: indicate directions on channels
  dmaengine: stm32-dma: Add error messages if xlate fails
  dmaengine: dw: pci: remove LPE Audio DMA ID
  dmaengine: stm32-dma: Add max_burst support
  dmaengine: stm32-dma: Add synchronization support
  dmaengine: stm32-dma: Fix residue computation issue in cyclic mode
  ...
......@@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-*/chid
/sys/devices/platform/QCOM8061:*/chid
Date: Dec 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains the ID of the channel within the HIDMA instance.
It is used to associate a given HIDMA channel with the
......
......@@ -2,7 +2,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains either 0 or 1 and indicates if the DMA channel is a
low priority (0) or high priority (1) channel.
......@@ -11,7 +11,7 @@ What: /sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains 0..15 and indicates the weight of the channel among
equal priority channels during round robin scheduling.
......@@ -20,7 +20,7 @@ What: /sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains the platform specific cycle value to wait after a
reset command is issued. If the value is chosen too short,
......@@ -32,7 +32,7 @@ What: /sys/devices/platform/hidma-mgmt*/dma_channels
/sys/devices/platform/QCOM8060:*/dma_channels
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains the number of dma channels supported by one instance
of HIDMA hardware. The value may change from chip to chip.
......@@ -41,7 +41,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_major
/sys/devices/platform/QCOM8060:*/hw_version_major
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Version number major for the hardware.
......@@ -49,7 +49,7 @@ What: /sys/devices/platform/hidma-mgmt*/hw_version_minor
/sys/devices/platform/QCOM8060:*/hw_version_minor
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Version number minor for the hardware.
......@@ -57,7 +57,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_rd_xactions
/sys/devices/platform/QCOM8060:*/max_rd_xactions
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains a value between 0 and 31. Maximum number of
read transactions that can be issued back to back.
......@@ -69,7 +69,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_read_request
/sys/devices/platform/QCOM8060:*/max_read_request
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Size of each read request. The value needs to be a power
of two and can be between 128 and 1024.
......@@ -78,7 +78,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_wr_xactions
/sys/devices/platform/QCOM8060:*/max_wr_xactions
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Contains a value between 0 and 31. Maximum number of
write transactions that can be issued back to back.
......@@ -91,7 +91,7 @@ What: /sys/devices/platform/hidma-mgmt*/max_write_request
/sys/devices/platform/QCOM8060:*/max_write_request
Date: Nov 2015
KernelVersion: 4.4
Contact: "Sinan Kaya <okaya@cudeaurora.org>"
Contact: "Sinan Kaya <okaya@codeaurora.org>"
Description:
Size of each write request. The value needs to be a power
of two and can be between 128 and 1024.
......@@ -40,8 +40,7 @@ Example:
DMA clients connected to the STM32 DMA controller must use the format
described in the dma.txt file, using a five-cell specifier for each
channel: a phandle plus four integer cells.
The four cells in order are:
channel: a phandle to the DMA controller plus the following four integer cells:
1. The channel id
2. The request line number
......@@ -61,7 +60,7 @@ The four cells in order are:
0x1: medium
0x2: high
0x3: very high
5. A 32bit mask specifying the DMA FIFO threshold configuration which are device
4. A 32bit mask specifying the DMA FIFO threshold configuration which are device
dependent:
-bit 0-1: Fifo threshold
0x0: 1/4 full FIFO
......
......@@ -157,7 +157,7 @@ config DMA_SUN4I
config DMA_SUN6I
tristate "Allwinner A31 SoCs DMA support"
depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
depends on MACH_SUN6I || MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
depends on RESET_CONTROLLER
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
......@@ -458,7 +458,7 @@ config STM32_DMA
help
Enable support for the on-chip DMA controller on STMicroelectronics
STM32 MCUs.
If you have a board based on such a MCU and wish to use DMA say Y or M
If you have a board based on such a MCU and wish to use DMA say Y
here.
config S3C24XX_DMAC
......@@ -571,12 +571,12 @@ config XILINX_ZYNQMP_DMA
Enable support for Xilinx ZynqMP DMA controller.
config ZX_DMA
tristate "ZTE ZX296702 DMA support"
tristate "ZTE ZX DMA support"
depends on ARCH_ZX || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support the DMA engine for ZTE ZX296702 platform devices.
Support the DMA engine for ZTE ZX family platform devices.
# driver files
......
......@@ -66,7 +66,7 @@ obj-$(CONFIG_TI_CPPI41) += cppi41.o
obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
obj-$(CONFIG_TI_EDMA) += edma.o
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
obj-$(CONFIG_ZX_DMA) += zx_dma.o
obj-$(CONFIG_ST_FDMA) += st_fdma.o
obj-y += qcom/
......
......@@ -65,7 +65,7 @@
#include <linux/mempool.h>
static DEFINE_MUTEX(dma_list_mutex);
static DEFINE_IDR(dma_idr);
static DEFINE_IDA(dma_ida);
static LIST_HEAD(dma_device_list);
static long dmaengine_ref_count;
......@@ -162,7 +162,7 @@ static void chan_dev_release(struct device *dev)
chan_dev = container_of(dev, typeof(*chan_dev), device);
if (atomic_dec_and_test(chan_dev->idr_ref)) {
mutex_lock(&dma_list_mutex);
idr_remove(&dma_idr, chan_dev->dev_id);
ida_remove(&dma_ida, chan_dev->dev_id);
mutex_unlock(&dma_list_mutex);
kfree(chan_dev->idr_ref);
}
......@@ -898,14 +898,15 @@ static int get_dma_id(struct dma_device *device)
{
int rc;
mutex_lock(&dma_list_mutex);
rc = idr_alloc(&dma_idr, NULL, 0, 0, GFP_KERNEL);
if (rc >= 0)
device->dev_id = rc;
do {
if (!ida_pre_get(&dma_ida, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&dma_list_mutex);
rc = ida_get_new(&dma_ida, &device->dev_id);
mutex_unlock(&dma_list_mutex);
} while (rc == -EAGAIN);
mutex_unlock(&dma_list_mutex);
return rc < 0 ? rc : 0;
return rc;
}
/**
......@@ -1035,7 +1036,7 @@ int dma_async_device_register(struct dma_device *device)
/* if we never registered a channel just release the idr */
if (atomic_read(idr_ref) == 0) {
mutex_lock(&dma_list_mutex);
idr_remove(&dma_idr, device->dev_id);
ida_remove(&dma_ida, device->dev_id);
mutex_unlock(&dma_list_mutex);
kfree(idr_ref);
return rc;
......
......@@ -138,16 +138,32 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc)
dwc->descs_allocated--;
}
static void dwc_initialize(struct dw_dma_chan *dwc)
static void dwc_initialize_chan_idma32(struct dw_dma_chan *dwc)
{
u32 cfghi = 0;
u32 cfglo = 0;
/* Set default burst alignment */
cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
/* Low 4 bits of the request lines */
cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
/* Request line extension (2 bits) */
cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
}
static void dwc_initialize_chan_dw(struct dw_dma_chan *dwc)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
u32 cfghi = DWC_CFGH_FIFO_MODE;
u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
bool hs_polarity = dwc->dws.hs_polarity;
if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
return;
cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
......@@ -156,6 +172,19 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
}
static void dwc_initialize(struct dw_dma_chan *dwc)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
if (test_bit(DW_DMA_IS_INITIALIZED, &dwc->flags))
return;
if (dw->pdata->is_idma32)
dwc_initialize_chan_idma32(dwc);
else
dwc_initialize_chan_dw(dwc);
/* Enable interrupts */
channel_set_bit(dw, MASK.XFER, dwc->mask);
......@@ -184,6 +213,37 @@ static inline void dwc_chan_disable(struct dw_dma *dw, struct dw_dma_chan *dwc)
cpu_relax();
}
static u32 bytes2block(struct dw_dma_chan *dwc, size_t bytes,
unsigned int width, size_t *len)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
u32 block;
/* Always in bytes for iDMA 32-bit */
if (dw->pdata->is_idma32)
width = 0;
if ((bytes >> width) > dwc->block_size) {
block = dwc->block_size;
*len = block << width;
} else {
block = bytes >> width;
*len = bytes;
}
return block;
}
static size_t block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
if (dw->pdata->is_idma32)
return IDMA32C_CTLH_BLOCK_TS(block);
return DWC_CTLH_BLOCK_TS(block) << width;
}
/*----------------------------------------------------------------------*/
/* Perform single block transfer */
......@@ -332,7 +392,7 @@ static inline u32 dwc_get_sent(struct dw_dma_chan *dwc)
u32 ctlhi = channel_readl(dwc, CTL_HI);
u32 ctllo = channel_readl(dwc, CTL_LO);
return (ctlhi & DWC_CTLH_BLOCK_TS_MASK) * (1 << (ctllo >> 4 & 7));
return block2bytes(dwc, ctlhi, ctllo >> 4 & 7);
}
static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc)
......@@ -692,10 +752,7 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
| DWC_CTLL_FC_M2M;
prev = first = NULL;
for (offset = 0; offset < len; offset += xfer_count << src_width) {
xfer_count = min_t(size_t, (len - offset) >> src_width,
dwc->block_size);
for (offset = 0; offset < len; offset += xfer_count) {
desc = dwc_desc_get(dwc);
if (!desc)
goto err_desc_get;
......@@ -703,8 +760,8 @@ dwc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
lli_write(desc, sar, src + offset);
lli_write(desc, dar, dest + offset);
lli_write(desc, ctllo, ctllo);
lli_write(desc, ctlhi, xfer_count);
desc->len = xfer_count << src_width;
lli_write(desc, ctlhi, bytes2block(dwc, len - offset, src_width, &xfer_count));
desc->len = xfer_count;
if (!first) {
first = desc;
......@@ -775,7 +832,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
u32 len, mem;
size_t dlen;
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
......@@ -789,17 +847,8 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
lli_write(desc, sar, mem);
lli_write(desc, dar, reg);
lli_write(desc, ctlhi, bytes2block(dwc, len, mem_width, &dlen));
lli_write(desc, ctllo, ctllo | DWC_CTLL_SRC_WIDTH(mem_width));
if ((len >> mem_width) > dwc->block_size) {
dlen = dwc->block_size << mem_width;
mem += dlen;
len -= dlen;
} else {
dlen = len;
len = 0;
}
lli_write(desc, ctlhi, dlen >> mem_width);
desc->len = dlen;
if (!first) {
......@@ -809,6 +858,9 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
mem += dlen;
len -= dlen;
total_len += dlen;
if (len)
......@@ -828,13 +880,12 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
for_each_sg(sgl, sg, sg_len, i) {
struct dw_desc *desc;
u32 len, dlen, mem;
u32 len, mem;
size_t dlen;
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
mem_width = __ffs(data_width | mem | len);
slave_sg_fromdev_fill_desc:
desc = dwc_desc_get(dwc);
if (!desc)
......@@ -842,16 +893,9 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
lli_write(desc, sar, reg);
lli_write(desc, dar, mem);
lli_write(desc, ctlhi, bytes2block(dwc, len, reg_width, &dlen));
mem_width = __ffs(data_width | mem | dlen);
lli_write(desc, ctllo, ctllo | DWC_CTLL_DST_WIDTH(mem_width));
if ((len >> reg_width) > dwc->block_size) {
dlen = dwc->block_size << reg_width;
mem += dlen;
len -= dlen;
} else {
dlen = len;
len = 0;
}
lli_write(desc, ctlhi, dlen >> reg_width);
desc->len = dlen;
if (!first) {
......@@ -861,6 +905,9 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
mem += dlen;
len -= dlen;
total_len += dlen;
if (len)
......@@ -903,25 +950,20 @@ bool dw_dma_filter(struct dma_chan *chan, void *param)
}
EXPORT_SYMBOL_GPL(dw_dma_filter);
/*
* Fix sconfig's burst size according to dw_dmac. We need to convert them as:
* 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
*
* NOTE: burst size 2 is not supported by controller.
*
* This can be done by finding least significant bit set: n & (n - 1)
*/
static inline void convert_burst(u32 *maxburst)
{
if (*maxburst > 1)
*maxburst = fls(*maxburst) - 2;
else
*maxburst = 0;
}
static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
struct dma_slave_config *sc = &dwc->dma_sconfig;
struct dw_dma *dw = to_dw_dma(chan->device);
/*
* Fix sconfig's burst size according to dw_dmac. We need to convert
* them as:
* 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
*
* NOTE: burst size 2 is not supported by DesignWare controller.
* iDMA 32-bit supports it.
*/
u32 s = dw->pdata->is_idma32 ? 1 : 2;
/* Check if chan will be configured for slave transfers */
if (!is_slave_direction(sconfig->direction))
......@@ -930,28 +972,39 @@ static int dwc_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
memcpy(&dwc->dma_sconfig, sconfig, sizeof(*sconfig));
dwc->direction = sconfig->direction;
convert_burst(&dwc->dma_sconfig.src_maxburst);
convert_burst(&dwc->dma_sconfig.dst_maxburst);
sc->src_maxburst = sc->src_maxburst > 1 ? fls(sc->src_maxburst) - s : 0;
sc->dst_maxburst = sc->dst_maxburst > 1 ? fls(sc->dst_maxburst) - s : 0;
return 0;
}
static int dwc_pause(struct dma_chan *chan)
static void dwc_chan_pause(struct dw_dma_chan *dwc, bool drain)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
unsigned long flags;
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
unsigned int count = 20; /* timeout iterations */
u32 cfglo;
spin_lock_irqsave(&dwc->lock, flags);
cfglo = channel_readl(dwc, CFG_LO);
if (dw->pdata->is_idma32) {
if (drain)
cfglo |= IDMA32C_CFGL_CH_DRAIN;
else
cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
}
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY) && count--)
udelay(2);
set_bit(DW_DMA_IS_PAUSED, &dwc->flags);
}
static int dwc_pause(struct dma_chan *chan)
{
struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
dwc_chan_pause(dwc, false);
spin_unlock_irqrestore(&dwc->lock, flags);
return 0;
......@@ -993,6 +1046,8 @@ static int dwc_terminate_all(struct dma_chan *chan)
clear_bit(DW_DMA_IS_SOFT_LLP, &dwc->flags);
dwc_chan_pause(dwc, true);
dwc_chan_disable(dw, dwc);
dwc_chan_resume(dwc);
......@@ -1085,6 +1140,32 @@ static void dwc_issue_pending(struct dma_chan *chan)
/*----------------------------------------------------------------------*/
/*
* Program FIFO size of channels.
*
* By default full FIFO (1024 bytes) is assigned to channel 0. Here we
* slice FIFO on equal parts between channels.
*/
static void idma32_fifo_partition(struct dw_dma *dw)
{
u64 value = IDMA32C_FP_PSIZE_CH0(128) | IDMA32C_FP_PSIZE_CH1(128) |
IDMA32C_FP_UPDATE;
u64 fifo_partition = 0;
if (!dw->pdata->is_idma32)
return;
/* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
fifo_partition |= value << 0;
/* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
fifo_partition |= value << 32;
/* Program FIFO Partition registers - 128 bytes for each channel */
idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
}
static void dw_dma_off(struct dw_dma *dw)
{
unsigned int i;
......@@ -1504,8 +1585,16 @@ int dw_dma_probe(struct dw_dma_chip *chip)
/* Force dma off, just in case */
dw_dma_off(dw);
idma32_fifo_partition(dw);
/* Device and instance ID for IRQ and DMA pool */
if (pdata->is_idma32)
snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", chip->id);
else
snprintf(dw->name, sizeof(dw->name), "dw:dmac%d", chip->id);
/* Create a pool of consistent memory blocks for hardware descriptors */
dw->desc_pool = dmam_pool_create("dw_dmac_desc_pool", chip->dev,
dw->desc_pool = dmam_pool_create(dw->name, chip->dev,
sizeof(struct dw_desc), 4, 0);
if (!dw->desc_pool) {
dev_err(chip->dev, "No memory for descriptors dma pool\n");
......@@ -1516,7 +1605,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
tasklet_init(&dw->tasklet, dw_dma_tasklet, (unsigned long)dw);
err = request_irq(chip->irq, dw_dma_interrupt, IRQF_SHARED,
"dw_dmac", dw);
dw->name, dw);
if (err)
goto err_pdata;
......@@ -1665,6 +1754,8 @@ int dw_dma_enable(struct dw_dma_chip *chip)
{
struct dw_dma *dw = chip->dw;
idma32_fifo_partition(dw);
dw_dma_on(dw);
return 0;
}
......
......@@ -15,6 +15,18 @@
#include "internal.h"
static struct dw_dma_platform_data mrfld_pdata = {
.nr_channels = 8,
.is_private = true,
.is_memcpy = true,
.is_idma32 = true,
.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
.chan_priority = CHAN_PRIORITY_ASCENDING,
.block_size = 131071,
.nr_masters = 1,
.data_width = {4},
};
static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
{
const struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
......@@ -47,6 +59,7 @@ static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
return -ENOMEM;
chip->dev = &pdev->dev;
chip->id = pdev->devfn;
chip->regs = pcim_iomap_table(pdev)[0];
chip->irq = pdev->irq;
chip->pdata = pdata;
......@@ -95,14 +108,16 @@ static const struct dev_pm_ops dw_pci_dev_pm_ops = {
};
static const struct pci_device_id dw_pci_id_table[] = {
/* Medfield */
/* Medfield (GPDMA) */
{ PCI_VDEVICE(INTEL, 0x0827) },
{ PCI_VDEVICE(INTEL, 0x0830) },
/* BayTrail */
{ PCI_VDEVICE(INTEL, 0x0f06) },
{ PCI_VDEVICE(INTEL, 0x0f40) },
/* Merrifield iDMA 32-bit (GPDMA) */
{ PCI_VDEVICE(INTEL, 0x11a2), (kernel_ulong_t)&mrfld_pdata },
/* Braswell */
{ PCI_VDEVICE(INTEL, 0x2286) },
{ PCI_VDEVICE(INTEL, 0x22c0) },
......
......@@ -202,6 +202,7 @@ static int dw_probe(struct platform_device *pdev)
pdata = dw_dma_parse_dt(pdev);
chip->dev = dev;
chip->id = pdev->id;
chip->pdata = pdata;
chip->clk = devm_clk_get(chip->dev, "hclk");
......
......@@ -3,15 +3,19 @@
*
* Copyright (C) 2005-2007 Atmel Corporation
* Copyright (C) 2010-2011 ST Microelectronics
* Copyright (C) 2016 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/io-64-nonatomic-hi-lo.h>
#include "internal.h"
#define DW_DMA_MAX_NR_REQUESTS 16
......@@ -85,9 +89,9 @@ struct dw_dma_regs {
DW_REG(ID);
DW_REG(TEST);
/* reserved */
DW_REG(__reserved0);
DW_REG(__reserved1);
/* iDMA 32-bit support */
DW_REG(CLASS_PRIORITY0);
DW_REG(CLASS_PRIORITY1);
/* optional encoded params, 0x3c8..0x3f7 */
u32 __reserved;
......@@ -99,6 +103,17 @@ struct dw_dma_regs {
/* top-level parameters */
u32 DW_PARAMS;
/* component ID */
u32 COMP_TYPE;
u32 COMP_VERSION;
/* iDMA 32-bit support */
DW_REG(FIFO_PARTITION0);
DW_REG(FIFO_PARTITION1);
DW_REG(SAI_ERR);
DW_REG(GLOBAL_CFG);
};
/*
......@@ -170,8 +185,9 @@ enum dw_dma_msize {
#define DWC_CTLL_LLP_S_EN (1 << 28) /* src block chain */
/* Bitfields in CTL_HI */
#define DWC_CTLH_DONE 0x00001000
#define DWC_CTLH_BLOCK_TS_MASK 0x00000fff
#define DWC_CTLH_BLOCK_TS_MASK GENMASK(11, 0)
#define DWC_CTLH_BLOCK_TS(x) ((x) & DWC_CTLH_BLOCK_TS_MASK)
#define DWC_CTLH_DONE (1 << 12)
/* Bitfields in CFG_LO */
#define DWC_CFGL_CH_PRIOR_MASK (0x7 << 5) /* priority mask */
......@@ -214,6 +230,33 @@ enum dw_dma_msize {
/* Bitfields in CFG */
#define DW_CFG_DMA_EN (1 << 0)
/* iDMA 32-bit support */
/* Bitfields in CTL_HI */
#define IDMA32C_CTLH_BLOCK_TS_MASK GENMASK(16, 0)
#define IDMA32C_CTLH_BLOCK_TS(x) ((x) & IDMA32C_CTLH_BLOCK_TS_MASK)
#define IDMA32C_CTLH_DONE (1 << 17)
/* Bitfields in CFG_LO */
#define IDMA32C_CFGL_DST_BURST_ALIGN (1 << 0) /* dst burst align */
#define IDMA32C_CFGL_SRC_BURST_ALIGN (1 << 1) /* src burst align */
#define IDMA32C_CFGL_CH_DRAIN (1 << 10) /* drain FIFO */
#define IDMA32C_CFGL_DST_OPT_BL (1 << 20) /* optimize dst burst length */
#define IDMA32C_CFGL_SRC_OPT_BL (1 << 21) /* optimize src burst length */
/* Bitfields in CFG_HI */
#define IDMA32C_CFGH_SRC_PER(x) ((x) << 0)
#define IDMA32C_CFGH_DST_PER(x) ((x) << 4)
#define IDMA32C_CFGH_RD_ISSUE_THD(x) ((x) << 8)
#define IDMA32C_CFGH_RW_ISSUE_THD(x) ((x) << 18)
#define IDMA32C_CFGH_SRC_PER_EXT(x) ((x) << 28) /* src peripheral extension */
#define IDMA32C_CFGH_DST_PER_EXT(x) ((x) << 30) /* dst peripheral extension */
/* Bitfields in FIFO_PARTITION */
#define IDMA32C_FP_PSIZE_CH0(x) ((x) << 0)
#define IDMA32C_FP_PSIZE_CH1(x) ((x) << 13)
#define IDMA32C_FP_UPDATE (1 << 26)
enum dw_dmac_flags {
DW_DMA_IS_CYCLIC = 0,
DW_DMA_IS_SOFT_LLP = 1,
......@@ -270,6 +313,7 @@ static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
struct dw_dma {
struct dma_device dma;
char name[20];
void __iomem *regs;
struct dma_pool *desc_pool;
struct tasklet_struct tasklet;
......@@ -293,6 +337,11 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
#define dma_writel(dw, name, val) \
dma_writel_native((val), &(__dw_regs(dw)->name))
#define idma32_readq(dw, name) \
hi_lo_readq(&(__dw_regs(dw)->name))
#define idma32_writeq(dw, name, val) \
hi_lo_writeq((val), &(__dw_regs(dw)->name))
#define channel_set_bit(dw, reg, mask) \
dma_writel(dw, reg, ((mask) << 8) | (mask))
#define channel_clear_bit(dw, reg, mask) \
......
......@@ -272,7 +272,7 @@ static void ipu_irq_handler(struct irq_desc *desc)
u32 status;
int i, line;
for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
for (i = 0; i < IPU_IRQ_NR_BANKS; i++) {
struct ipu_irq_bank *bank = irq_bank + i;
raw_spin_lock(&bank_lock);
......
......@@ -1724,6 +1724,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
dmac->dev = &pdev->dev;
platform_set_drvdata(pdev, dmac);
dma_set_mask_and_coherent(dmac->dev, DMA_BIT_MASK(40));
ret = rcar_dmac_parse_of(&pdev->dev, dmac);
if (ret < 0)
......
......@@ -2809,12 +2809,14 @@ static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
{
if (dma_has_cap(DMA_SLAVE, dev->cap_mask))
if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
dev->device_prep_slave_sg = d40_prep_slave_sg;
dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
}
if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
dev->device_prep_dma_memcpy = d40_prep_memcpy;
dev->directions = BIT(DMA_MEM_TO_MEM);
/*
* This controller can only access address at even
* 32bit boundaries, i.e. 2^2
......@@ -2836,6 +2838,7 @@ static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
dev->device_pause = d40_pause;
dev->device_resume = d40_resume;
dev->device_terminate_all = d40_terminate_all;
dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
dev->dev = base->dev;
}
......
......@@ -114,6 +114,7 @@
#define STM32_DMA_MAX_CHANNELS 0x08
#define STM32_DMA_MAX_REQUEST_ID 0x08
#define STM32_DMA_MAX_DATA_PARAM 0x03
#define STM32_DMA_MAX_BURST 16
enum stm32_dma_width {
STM32_DMA_BYTE,
......@@ -403,6 +404,13 @@ static int stm32_dma_terminate_all(struct dma_chan *c)
return 0;
}
static void stm32_dma_synchronize(struct dma_chan *c)
{
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
vchan_synchronize(&chan->vchan);
}
static void stm32_dma_dump_reg(struct stm32_dma_chan *chan)
{
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
......@@ -421,7 +429,7 @@ static void stm32_dma_dump_reg(struct stm32_dma_chan *chan)
dev_dbg(chan2dev(chan), "SFCR: 0x%08x\n", sfcr);
}
static int stm32_dma_start_transfer(struct stm32_dma_chan *chan)
static void stm32_dma_start_transfer(struct stm32_dma_chan *chan)
{
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
struct virt_dma_desc *vdesc;
......@@ -432,12 +440,12 @@ static int stm32_dma_start_transfer(struct stm32_dma_chan *chan)
ret = stm32_dma_disable_chan(chan);
if (ret < 0)
return ret;
return;
if (!chan->desc) {
vdesc = vchan_next_desc(&chan->vchan);
if (!vdesc)
return -EPERM;
return;
chan->desc = to_stm32_dma_desc(vdesc);
chan->next_sg = 0;
......@@ -471,7 +479,7 @@ static int stm32_dma_start_transfer(struct stm32_dma_chan *chan)
chan->busy = true;
return 0;
dev_dbg(chan2dev(chan), "vchan %p: started\n", &chan->vchan);
}
static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan)
......@@ -500,8 +508,6 @@ static void stm32_dma_configure_next_sg(struct stm32_dma_chan *chan)
dev_dbg(chan2dev(chan), "CT=0 <=> SM1AR: 0x%08x\n",
stm32_dma_read(dmadev, STM32_DMA_SM1AR(id)));
}
chan->next_sg++;
}
}
......@@ -510,6 +516,7 @@ static void stm32_dma_handle_chan_done(struct stm32_dma_chan *chan)
if (chan->desc) {
if (chan->desc->cyclic) {
vchan_cyclic_callback(&chan->desc->vdesc);
chan->next_sg++;
stm32_dma_configure_next_sg(chan);
} else {
chan->busy = false;
......@@ -552,15 +559,13 @@ static void stm32_dma_issue_pending(struct dma_chan *c)
{
struct stm32_dma_chan *chan = to_stm32_dma_chan(c);
unsigned long flags;
int ret;
spin_lock_irqsave(&chan->vchan.lock, flags);
if (!chan->busy) {
if (vchan_issue_pending(&chan->vchan) && !chan->desc) {
ret = stm32_dma_start_transfer(chan);
if ((!ret) && (chan->desc->cyclic))
stm32_dma_configure_next_sg(chan);
}
if (vchan_issue_pending(&chan->vchan) && !chan->desc && !chan->busy) {
dev_dbg(chan2dev(chan), "vchan %p: issued\n", &chan->vchan);
stm32_dma_start_transfer(chan);
if (chan->desc->cyclic)
stm32_dma_configure_next_sg(chan);
}
spin_unlock_irqrestore(&chan->vchan.lock, flags);
}
......@@ -848,26 +853,40 @@ static struct dma_async_tx_descriptor *stm32_dma_prep_dma_memcpy(
return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
}
static u32 stm32_dma_get_remaining_bytes(struct stm32_dma_chan *chan)
{
u32 dma_scr, width, ndtr;
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
width = STM32_DMA_SCR_PSIZE_GET(dma_scr);
ndtr = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id));
return ndtr << width;
}
static size_t stm32_dma_desc_residue(struct stm32_dma_chan *chan,
struct stm32_dma_desc *desc,
u32 next_sg)
{
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
u32 dma_scr, width, residue, count;
u32 residue = 0;
int i;
residue = 0;
/*
* In cyclic mode, for the last period, residue = remaining bytes from
* NDTR
*/
if (chan->desc->cyclic && next_sg == 0)
return stm32_dma_get_remaining_bytes(chan);
/*
* For all other periods in cyclic mode, and in sg mode,
* residue = remaining bytes from NDTR + remaining periods/sg to be
* transferred
*/
for (i = next_sg; i < desc->num_sgs; i++)
residue += desc->sg_req[i].len;
if (next_sg != 0) {
dma_scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
width = STM32_DMA_SCR_PSIZE_GET(dma_scr);
count = stm32_dma_read(dmadev, STM32_DMA_SNDTR(chan->id));
residue += count << width;
}
residue += stm32_dma_get_remaining_bytes(chan);
return residue;
}
......@@ -964,27 +983,36 @@ static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
struct stm32_dma_device *dmadev = ofdma->of_dma_data;
struct device *dev = dmadev->ddev.dev;
struct stm32_dma_cfg cfg;
struct stm32_dma_chan *chan;
struct dma_chan *c;
if (dma_spec->args_count < 4)
if (dma_spec->args_count < 4) {
dev_err(dev, "Bad number of cells\n");
return NULL;
}
cfg.channel_id = dma_spec->args[0];
cfg.request_line = dma_spec->args[1];
cfg.stream_config = dma_spec->args[2];
cfg.threshold = dma_spec->args[3];
if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) || (cfg.request_line >=
STM32_DMA_MAX_REQUEST_ID))
if ((cfg.channel_id >= STM32_DMA_MAX_CHANNELS) ||
(cfg.request_line >= STM32_DMA_MAX_REQUEST_ID)) {
dev_err(dev, "Bad channel and/or request id\n");
return NULL;
}
chan = &dmadev->chan[cfg.channel_id];
c = dma_get_slave_channel(&chan->vchan.chan);
if (c)
stm32_dma_set_config(chan, &cfg);
if (!c) {
dev_err(dev, "No more channel avalaible\n");
return NULL;
}
stm32_dma_set_config(chan, &cfg);
return c;
}
......@@ -1048,6 +1076,7 @@ static int stm32_dma_probe(struct platform_device *pdev)
dd->device_prep_dma_cyclic = stm32_dma_prep_dma_cyclic;
dd->device_config = stm32_dma_slave_config;
dd->device_terminate_all = stm32_dma_terminate_all;
dd->device_synchronize = stm32_dma_synchronize;
dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
......@@ -1056,6 +1085,7 @@ static int stm32_dma_probe(struct platform_device *pdev)
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
dd->max_burst = STM32_DMA_MAX_BURST;
dd->dev = &pdev->dev;
INIT_LIST_HEAD(&dd->channels);
......
......@@ -26,7 +26,7 @@
#define DRIVER_NAME "zx-dma"
#define DMA_ALIGN 4
#define DMA_MAX_SIZE (0x10000 - PAGE_SIZE)
#define DMA_MAX_SIZE (0x10000 - 512)
#define LLI_BLOCK_SIZE (4 * PAGE_SIZE)
#define REG_ZX_SRC_ADDR 0x00
......@@ -365,7 +365,8 @@ static enum dma_status zx_dma_tx_status(struct dma_chan *chan,
bytes = 0;
clli = zx_dma_get_curr_lli(p);
index = (clli - ds->desc_hw_lli) / sizeof(struct zx_desc_hw);
index = (clli - ds->desc_hw_lli) /
sizeof(struct zx_desc_hw) + 1;
for (; index < ds->desc_num; index++) {
bytes += ds->desc_hw[index].src_x;
/* end of lli */
......@@ -812,6 +813,7 @@ static int zx_dma_probe(struct platform_device *op)
INIT_LIST_HEAD(&d->slave.channels);
dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
dma_cap_set(DMA_MEMCPY, d->slave.cap_mask);
dma_cap_set(DMA_CYCLIC, d->slave.cap_mask);
dma_cap_set(DMA_PRIVATE, d->slave.cap_mask);
d->slave.dev = &op->dev;
d->slave.device_free_chan_resources = zx_dma_free_chan_resources;
......
......@@ -87,7 +87,7 @@ struct async_submit_ctl {
void *scribble;
};
#ifdef CONFIG_DMA_ENGINE
#if defined(CONFIG_DMA_ENGINE) && !defined(CONFIG_ASYNC_TX_CHANNEL_SWITCH)
#define async_tx_issue_pending_all dma_issue_pending_all
/**
......
......@@ -23,6 +23,7 @@ struct dw_dma;
/**
* struct dw_dma_chip - representation of DesignWare DMA controller hardware
* @dev: struct device of the DMA controller
* @id: instance ID
* @irq: irq line
* @regs: memory mapped I/O space
* @clk: hclk clock
......@@ -31,6 +32,7 @@ struct dw_dma;
*/
struct dw_dma_chip {
struct device *dev;
int id;
int irq;
void __iomem *regs;
struct clk *clk;
......
......@@ -894,6 +894,17 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memset(
len, flags);
}
static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
size_t len, unsigned long flags)
{
if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy)
return NULL;
return chan->device->device_prep_dma_memcpy(chan, dest, src,
len, flags);
}
static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg(
struct dma_chan *chan,
struct scatterlist *dst_sg, unsigned int dst_nents,
......
......@@ -41,6 +41,7 @@ struct dw_dma_slave {
* @is_private: The device channels should be marked as private and not for
* by the general purpose DMA channel allocator.
* @is_memcpy: The device channels do support memory-to-memory transfers.
* @is_idma32: The type of the DMA controller is iDMA32
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
......@@ -53,6 +54,7 @@ struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_private;
bool is_memcpy;
bool is_idma32;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册