提交 9713d5d0 编写于 作者: M Mark Brown

Merge remote-tracking branches 'asoc/topic/gpio' and 'asoc/topic/intel' into asoc-next

......@@ -452,6 +452,9 @@ int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
#ifdef CONFIG_GPIOLIB
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count, struct snd_soc_jack_gpio *gpios);
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
#else
......@@ -461,6 +464,14 @@ static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
return 0;
}
static inline int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count,
struct snd_soc_jack_gpio *gpios)
{
return 0;
}
static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
......@@ -587,8 +598,12 @@ struct snd_soc_jack_zone {
/**
* struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
*
* @gpio: gpio number
* @name: gpio name
* @gpio: legacy gpio number
* @idx: gpio descriptor index within the function of the GPIO
* consumer device
* @gpiod_dev GPIO consumer device
* @name: gpio name. Also as connection ID for the GPIO consumer
* device function name lookup
* @report: value to report when jack detected
* @invert: report presence in low state
* @debouce_time: debouce time in ms
......@@ -599,6 +614,8 @@ struct snd_soc_jack_zone {
*/
struct snd_soc_jack_gpio {
unsigned int gpio;
unsigned int idx;
struct device *gpiod_dev;
const char *name;
int report;
int invert;
......@@ -607,6 +624,7 @@ struct snd_soc_jack_gpio {
struct snd_soc_jack *jack;
struct delayed_work work;
struct gpio_desc *desc;
void *data;
int (*jack_status_check)(void *data);
......
......@@ -49,3 +49,12 @@ config SND_SOC_INTEL_BYT_RT5640_MACH
help
This adds audio driver for Intel Baytrail platform based boards
with the RT5640 audio codec.
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
depends on SND_SOC_INTEL_SST && X86_INTEL_LPSS && I2C
select SND_SOC_INTEL_BAYTRAIL
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
with the MAX98090 audio codec.
......@@ -23,6 +23,8 @@ obj-$(CONFIG_SND_SOC_INTEL_BAYTRAIL) += snd-soc-sst-baytrail-pcm.o
# Machine support
snd-soc-sst-haswell-objs := haswell.o
snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o
snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
/*
* Intel Baytrail SST MAX98090 machine driver
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include "../codecs/max98090.h"
struct byt_max98090_private {
struct snd_soc_jack jack;
};
static const struct snd_soc_dapm_widget byt_max98090_widgets[] = {
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
SND_SOC_DAPM_MIC("Int Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
};
static const struct snd_soc_dapm_route byt_max98090_audio_map[] = {
{"IN34", NULL, "Headset Mic"},
{"IN34", NULL, "MICBIAS"},
{"MICBIAS", NULL, "Headset Mic"},
{"DMICL", NULL, "Int Mic"},
{"Headphone", NULL, "HPL"},
{"Headphone", NULL, "HPR"},
{"Ext Spk", NULL, "SPKL"},
{"Ext Spk", NULL, "SPKR"},
};
static const struct snd_kcontrol_new byt_max98090_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Int Mic"),
SOC_DAPM_PIN_SWITCH("Ext Spk"),
};
static struct snd_soc_jack_pin hs_jack_pins[] = {
{
.pin = "Headphone",
.mask = SND_JACK_HEADPHONE,
},
{
.pin = "Headset Mic",
.mask = SND_JACK_MICROPHONE,
},
{
.pin = "Ext Spk",
.mask = SND_JACK_LINEOUT,
},
{
.pin = "Int Mic",
.mask = SND_JACK_LINEIN,
},
};
static struct snd_soc_jack_gpio hs_jack_gpios[] = {
{
.name = "hp-gpio",
.idx = 0,
.report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT,
.debounce_time = 200,
},
{
.name = "mic-gpio",
.idx = 1,
.report = SND_JACK_MICROPHONE | SND_JACK_LINEIN,
.debounce_time = 200,
},
};
static int byt_max98090_init(struct snd_soc_pcm_runtime *runtime)
{
int ret;
struct snd_soc_codec *codec = runtime->codec;
struct snd_soc_card *card = runtime->card;
struct byt_max98090_private *drv = snd_soc_card_get_drvdata(card);
struct snd_soc_jack *jack = &drv->jack;
card->dapm.idle_bias_off = true;
ret = snd_soc_dai_set_sysclk(runtime->codec_dai,
M98090_REG_SYSTEM_CLOCK,
25000000, SND_SOC_CLOCK_IN);
if (ret < 0) {
dev_err(card->dev, "Can't set codec clock %d\n", ret);
return ret;
}
/* Enable jack detection */
ret = snd_soc_jack_new(codec, "Headphone", SND_JACK_HEADPHONE, jack);
if (ret)
return ret;
ret = snd_soc_jack_add_pins(jack, ARRAY_SIZE(hs_jack_pins),
hs_jack_pins);
if (ret)
return ret;
ret = snd_soc_jack_add_gpiods(card->dev->parent, jack,
ARRAY_SIZE(hs_jack_gpios),
hs_jack_gpios);
if (ret)
return ret;
return max98090_mic_detect(codec, jack);
}
static struct snd_soc_dai_link byt_max98090_dais[] = {
{
.name = "Baytrail Audio",
.stream_name = "Audio",
.cpu_dai_name = "baytrail-pcm-audio",
.codec_dai_name = "HiFi",
.codec_name = "i2c-193C9890:00",
.platform_name = "baytrail-pcm-audio",
.init = byt_max98090_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
},
};
static struct snd_soc_card byt_max98090_card = {
.name = "byt-max98090",
.dai_link = byt_max98090_dais,
.num_links = ARRAY_SIZE(byt_max98090_dais),
.dapm_widgets = byt_max98090_widgets,
.num_dapm_widgets = ARRAY_SIZE(byt_max98090_widgets),
.dapm_routes = byt_max98090_audio_map,
.num_dapm_routes = ARRAY_SIZE(byt_max98090_audio_map),
.controls = byt_max98090_controls,
.num_controls = ARRAY_SIZE(byt_max98090_controls),
};
static int byt_max98090_probe(struct platform_device *pdev)
{
int ret_val = 0;
struct byt_max98090_private *priv;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC);
if (!priv) {
dev_err(&pdev->dev, "allocation failed\n");
return -ENOMEM;
}
byt_max98090_card.dev = &pdev->dev;
snd_soc_card_set_drvdata(&byt_max98090_card, priv);
ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_max98090_card);
if (ret_val) {
dev_err(&pdev->dev,
"snd_soc_register_card failed %d\n", ret_val);
return ret_val;
}
return ret_val;
}
static int byt_max98090_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct byt_max98090_private *priv = snd_soc_card_get_drvdata(card);
snd_soc_jack_free_gpios(&priv->jack, ARRAY_SIZE(hs_jack_gpios),
hs_jack_gpios);
return 0;
}
static struct platform_driver byt_max98090_driver = {
.probe = byt_max98090_probe,
.remove = byt_max98090_remove,
.driver = {
.name = "byt-max98090",
.owner = THIS_MODULE,
.pm = &snd_soc_pm_ops,
},
};
module_platform_driver(byt_max98090_driver)
MODULE_DESCRIPTION("ASoC Intel(R) Baytrail Machine driver");
MODULE_AUTHOR("Omair Md Abdullah, Jarkko Nikula");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:byt-max98090");
......@@ -132,43 +132,20 @@ static struct snd_soc_card byt_rt5640_card = {
.num_dapm_routes = ARRAY_SIZE(byt_rt5640_audio_map),
};
#ifdef CONFIG_PM_SLEEP
static const struct dev_pm_ops byt_rt5640_pm_ops = {
.suspend = snd_soc_suspend,
.resume = snd_soc_resume,
};
#define BYT_RT5640_PM_OPS (&byt_rt5640_pm_ops)
#else
#define BYT_RT5640_PM_OPS NULL
#endif
static int byt_rt5640_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &byt_rt5640_card;
struct device *dev = &pdev->dev;
card->dev = &pdev->dev;
dev_set_drvdata(dev, card);
return snd_soc_register_card(card);
}
static int byt_rt5640_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
snd_soc_unregister_card(card);
return 0;
return devm_snd_soc_register_card(&pdev->dev, card);
}
static struct platform_driver byt_rt5640_audio = {
.probe = byt_rt5640_probe,
.remove = byt_rt5640_remove,
.driver = {
.name = "byt-rt5640",
.owner = THIS_MODULE,
.pm = BYT_RT5640_PM_OPS,
.pm = &snd_soc_pm_ops,
},
};
module_platform_driver(byt_rt5640_audio)
......
......@@ -202,18 +202,11 @@ static int haswell_audio_probe(struct platform_device *pdev)
{
haswell_rt5640.dev = &pdev->dev;
return snd_soc_register_card(&haswell_rt5640);
}
static int haswell_audio_remove(struct platform_device *pdev)
{
snd_soc_unregister_card(&haswell_rt5640);
return 0;
return devm_snd_soc_register_card(&pdev->dev, &haswell_rt5640);
}
static struct platform_driver haswell_audio = {
.probe = haswell_audio_probe,
.remove = haswell_audio_remove,
.driver = {
.name = "haswell-audio",
.owner = THIS_MODULE,
......
......@@ -247,6 +247,7 @@ static struct sst_acpi_desc sst_acpi_broadwell_desc = {
static struct sst_acpi_mach baytrail_machines[] = {
{ "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-i2s_master" },
{ "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-i2s_master" },
{}
};
......
......@@ -22,7 +22,6 @@
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/kthread.h>
#include <linux/firmware.h>
......@@ -892,7 +891,7 @@ int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata)
/* start the IPC message thread */
init_kthread_worker(&byt->kworker);
byt->tx_thread = kthread_run(kthread_worker_fn,
&byt->kworker,
&byt->kworker, "%s",
dev_name(byt->dev));
if (IS_ERR(byt->tx_thread)) {
err = PTR_ERR(byt->tx_thread);
......@@ -907,7 +906,7 @@ int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata)
byt->dsp = sst_dsp_new(dev, &byt_dev, pdata);
if (byt->dsp == NULL) {
err = -ENODEV;
goto err_free_msg;
goto dsp_err;
}
/* keep the DSP in reset state for base FW loading */
......@@ -940,6 +939,8 @@ int sst_byt_dsp_init(struct device *dev, struct sst_pdata *pdata)
sst_fw_free(byt_sst_fw);
fw_err:
sst_dsp_free(byt->dsp);
dsp_err:
kthread_stop(byt->tx_thread);
err_free_msg:
kfree(byt->msg);
......@@ -954,6 +955,7 @@ void sst_byt_dsp_free(struct device *dev, struct sst_pdata *pdata)
sst_dsp_reset(byt->dsp);
sst_fw_free_all(byt->dsp);
sst_dsp_free(byt->dsp);
kthread_stop(byt->tx_thread);
kfree(byt->msg);
}
EXPORT_SYMBOL_GPL(sst_byt_dsp_free);
......@@ -180,6 +180,7 @@ static int sst_byt_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
pcm_data->hw_ptr = 0;
sst_byt_stream_start(byt, pcm_data->stream, 0);
break;
case SNDRV_PCM_TRIGGER_RESUME:
......
......@@ -25,7 +25,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/kthread.h>
#include <linux/firmware.h>
......@@ -1730,17 +1729,17 @@ int sst_hsw_dsp_init(struct device *dev, struct sst_pdata *pdata)
ret = msg_empty_list_init(hsw);
if (ret < 0)
goto list_err;
return -ENOMEM;
/* start the IPC message thread */
init_kthread_worker(&hsw->kworker);
hsw->tx_thread = kthread_run(kthread_worker_fn,
&hsw->kworker,
&hsw->kworker, "%s",
dev_name(hsw->dev));
if (IS_ERR(hsw->tx_thread)) {
ret = PTR_ERR(hsw->tx_thread);
dev_err(hsw->dev, "error: failed to create message TX task\n");
goto list_err;
goto err_free_msg;
}
init_kthread_work(&hsw->kwork, ipc_tx_msgs);
......@@ -1750,7 +1749,7 @@ int sst_hsw_dsp_init(struct device *dev, struct sst_pdata *pdata)
hsw->dsp = sst_dsp_new(dev, &hsw_dev, pdata);
if (hsw->dsp == NULL) {
ret = -ENODEV;
goto list_err;
goto dsp_err;
}
/* keep the DSP in reset state for base FW loading */
......@@ -1794,8 +1793,11 @@ int sst_hsw_dsp_init(struct device *dev, struct sst_pdata *pdata)
sst_fw_free(hsw_sst_fw);
fw_err:
sst_dsp_free(hsw->dsp);
dsp_err:
kthread_stop(hsw->tx_thread);
err_free_msg:
kfree(hsw->msg);
list_err:
return ret;
}
EXPORT_SYMBOL_GPL(sst_hsw_dsp_init);
......@@ -1808,6 +1810,7 @@ void sst_hsw_dsp_free(struct device *dev, struct sst_pdata *pdata)
sst_fw_free_all(hsw->dsp);
sst_dsp_free(hsw->dsp);
kfree(hsw->scratch);
kthread_stop(hsw->tx_thread);
kfree(hsw->msg);
}
EXPORT_SYMBOL_GPL(sst_hsw_dsp_free);
......@@ -17,7 +17,6 @@
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <asm/page.h>
#include <asm/pgtable.h>
......
......@@ -14,6 +14,7 @@
#include <sound/jack.h>
#include <sound/soc.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
......@@ -240,7 +241,7 @@ static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio)
int enable;
int report;
enable = gpio_get_value_cansleep(gpio->gpio);
enable = gpiod_get_value_cansleep(gpio->desc);
if (gpio->invert)
enable = !enable;
......@@ -297,31 +298,50 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
int i, ret;
for (i = 0; i < count; i++) {
if (!gpio_is_valid(gpios[i].gpio)) {
dev_err(jack->codec->dev, "ASoC: Invalid gpio %d\n",
gpios[i].gpio);
ret = -EINVAL;
goto undo;
}
if (!gpios[i].name) {
dev_err(jack->codec->dev, "ASoC: No name for gpio %d\n",
gpios[i].gpio);
dev_err(jack->codec->dev,
"ASoC: No name for gpio at index %d\n", i);
ret = -EINVAL;
goto undo;
}
ret = gpio_request(gpios[i].gpio, gpios[i].name);
if (ret)
goto undo;
if (gpios[i].gpiod_dev) {
/* GPIO descriptor */
gpios[i].desc = gpiod_get_index(gpios[i].gpiod_dev,
gpios[i].name,
gpios[i].idx);
if (IS_ERR(gpios[i].desc)) {
ret = PTR_ERR(gpios[i].desc);
dev_err(gpios[i].gpiod_dev,
"ASoC: Cannot get gpio at index %d: %d",
i, ret);
goto undo;
}
} else {
/* legacy GPIO number */
if (!gpio_is_valid(gpios[i].gpio)) {
dev_err(jack->codec->dev,
"ASoC: Invalid gpio %d\n",
gpios[i].gpio);
ret = -EINVAL;
goto undo;
}
ret = gpio_request(gpios[i].gpio, gpios[i].name);
if (ret)
goto undo;
gpios[i].desc = gpio_to_desc(gpios[i].gpio);
}
ret = gpio_direction_input(gpios[i].gpio);
ret = gpiod_direction_input(gpios[i].desc);
if (ret)
goto err;
INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
gpios[i].jack = jack;
ret = request_any_context_irq(gpio_to_irq(gpios[i].gpio),
ret = request_any_context_irq(gpiod_to_irq(gpios[i].desc),
gpio_handler,
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
......@@ -331,15 +351,15 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
goto err;
if (gpios[i].wake) {
ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1);
ret = irq_set_irq_wake(gpiod_to_irq(gpios[i].desc), 1);
if (ret != 0)
dev_err(jack->codec->dev, "ASoC: "
"Failed to mark GPIO %d as wake source: %d\n",
gpios[i].gpio, ret);
dev_err(jack->codec->dev,
"ASoC: Failed to mark GPIO at index %d as wake source: %d\n",
i, ret);
}
/* Expose GPIO value over sysfs for diagnostic purposes */
gpio_export(gpios[i].gpio, false);
gpiod_export(gpios[i].desc, false);
/* Update initial jack status */
schedule_delayed_work(&gpios[i].work,
......@@ -357,6 +377,30 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios);
/**
* snd_soc_jack_add_gpiods - Associate GPIO descriptor pins with an ASoC jack
*
* @gpiod_dev: GPIO consumer device
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* This function will request gpio, set data direction and request irq
* for each gpio in the array.
*/
int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count, struct snd_soc_jack_gpio *gpios)
{
int i;
for (i = 0; i < count; i++)
gpios[i].gpiod_dev = gpiod_dev;
return snd_soc_jack_add_gpios(jack, count, gpios);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpiods);
/**
* snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
*
......@@ -372,10 +416,10 @@ void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
int i;
for (i = 0; i < count; i++) {
gpio_unexport(gpios[i].gpio);
free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]);
gpiod_unexport(gpios[i].desc);
free_irq(gpiod_to_irq(gpios[i].desc), &gpios[i]);
cancel_delayed_work_sync(&gpios[i].work);
gpio_free(gpios[i].gpio);
gpiod_put(gpios[i].desc);
gpios[i].jack = NULL;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册