提交 96d12cbd 编写于 作者: I Imre Deak 提交者: Daniel Vetter

drm/i915: access the PP_ON_DELAYS/PP_OFF_DELAYS regs only pre GEN5

These registers exist only before GEN5, so currently we may access
undefined registers on VLV/CHV and BXT. Apply the workaround only pre
GEN5.

Since the workaround is relevant only when LVDS is present, for clarity
apply it only if this is the case.

This triggered an unclaimed register access warning on BXT.

v2: (Ville)
- move the workaround to the LVDS init code
- print a debug note about the workaround
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 c5796b71
......@@ -997,8 +997,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
intel_setup_gmbus(dev);
intel_opregion_setup(dev);
intel_setup_bios(dev);
i915_gem_load(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
......
......@@ -1340,21 +1340,3 @@ intel_parse_bios(struct drm_device *dev)
return 0;
}
/* Ensure that vital registers have been initialised, even if the BIOS
* is absent or just failing to do its job.
*/
void intel_setup_bios(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* Set the Panel Power On/Off timings if uninitialized. */
if (!HAS_PCH_SPLIT(dev) &&
I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
/* Set T2 to 40ms and T5 to 200ms */
I915_WRITE(PP_ON_DELAYS, 0x019007d0);
/* Set T3 to 35ms and Tx to 200ms */
I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
}
}
......@@ -588,7 +588,6 @@ struct bdb_psr {
struct psr_table psr_table[16];
} __packed;
void intel_setup_bios(struct drm_device *dev);
int intel_parse_bios(struct drm_device *dev);
/*
......
......@@ -985,6 +985,18 @@ void intel_lvds_init(struct drm_device *dev)
DRM_DEBUG_KMS("LVDS is not present in VBT, but enabled anyway\n");
}
/* Set the Panel Power On/Off timings if uninitialized. */
if (INTEL_INFO(dev_priv)->gen < 5 &&
I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
/* Set T2 to 40ms and T5 to 200ms */
I915_WRITE(PP_ON_DELAYS, 0x019007d0);
/* Set T3 to 35ms and Tx to 200ms */
I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
DRM_DEBUG_KMS("Panel power timings uninitialized, setting defaults\n");
}
lvds_encoder = kzalloc(sizeof(*lvds_encoder), GFP_KERNEL);
if (!lvds_encoder)
return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册