提交 96cf5f02 编写于 作者: S Seungwon Jeon 提交者: Chris Ball

mmc: core: fix the decision of HS200/DDR card-type

Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.
Signed-off-by: NSeungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 c0a120a4
......@@ -235,6 +235,36 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
return err;
}
static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
unsigned int caps = host->caps, caps2 = host->caps2;
unsigned int hs_max_dtr = 0;
if (card_type & EXT_CSD_CARD_TYPE_26)
hs_max_dtr = MMC_HIGH_26_MAX_DTR;
if (caps & MMC_CAP_MMC_HIGHSPEED &&
card_type & EXT_CSD_CARD_TYPE_52)
hs_max_dtr = MMC_HIGH_52_MAX_DTR;
if ((caps & MMC_CAP_1_8V_DDR &&
card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
(caps & MMC_CAP_1_2V_DDR &&
card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
(caps2 & MMC_CAP2_HS200_1_2V_SDR &&
card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
hs_max_dtr = MMC_HS200_MAX_DTR;
card->ext_csd.hs_max_dtr = hs_max_dtr;
card->ext_csd.card_type = card_type;
}
/*
* Decode extended CSD.
*/
......@@ -284,56 +314,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512)
mmc_card_set_blockaddr(card);
}
card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
case EXT_CSD_CARD_TYPE_SDR_ALL:
case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
card->ext_csd.hs_max_dtr = 200000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
break;
case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
card->ext_csd.hs_max_dtr = 200000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
break;
case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
card->ext_csd.hs_max_dtr = 200000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
break;
case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_52;
break;
case EXT_CSD_CARD_TYPE_DDR_1_2V | EXT_CSD_CARD_TYPE_52 |
EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_2V;
break;
case EXT_CSD_CARD_TYPE_DDR_1_8V | EXT_CSD_CARD_TYPE_52 |
EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
card->ext_csd.card_type = EXT_CSD_CARD_TYPE_DDR_1_8V;
break;
case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
break;
case EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 26000000;
break;
default:
/* MMC v4 spec says this cannot happen */
pr_warning("%s: card is mmc v4 but doesn't "
"support any high-speed modes.\n",
mmc_hostname(card->host));
}
mmc_select_card_type(card);
card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
card->ext_csd.raw_erase_timeout_mult =
......
......@@ -58,6 +58,10 @@ struct mmc_ext_csd {
unsigned int generic_cmd6_time; /* Units: 10ms */
unsigned int power_off_longtime; /* Units: ms */
unsigned int hs_max_dtr;
#define MMC_HIGH_26_MAX_DTR 26000000
#define MMC_HIGH_52_MAX_DTR 52000000
#define MMC_HIGH_DDR_MAX_DTR 52000000
#define MMC_HS200_MAX_DTR 200000000
unsigned int sectors;
unsigned int card_type;
unsigned int hc_erase_size; /* In sectors */
......
......@@ -354,66 +354,6 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_SDR_1_2V)
#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V | \
EXT_CSD_CARD_TYPE_DDR_1_8V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_DDR_1_8V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V | \
EXT_CSD_CARD_TYPE_DDR_1_2V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_DDR_1_2V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V | \
EXT_CSD_CARD_TYPE_DDR_52 | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V | \
EXT_CSD_CARD_TYPE_DDR_52 | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 | \
EXT_CSD_CARD_TYPE_DDR_1_8V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 | \
EXT_CSD_CARD_TYPE_DDR_1_2V | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 | \
EXT_CSD_CARD_TYPE_DDR_52 | \
EXT_CSD_CARD_TYPE_52 | \
EXT_CSD_CARD_TYPE_26)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册