提交 96c08173 编写于 作者: D David Lechner 提交者: Sekhar Nori

ARM: davinci: move davinci_clk_init() to init_time

This moves the call of davinci_clk_init() from map_io to init_time for all
boards.

This is the proper place to init clocks. This is also done in preparation
for moving to the common clock framework.

dm646x is a special case because we need to handle different ref_clk rates
depending on which board is being used. The clock init in this case is
modified to set the rate before registering the clocks instead of using
davinci_set_refclk_rate() to recalculate the entire clock tree after all
of the clocks are registered.

Also, the cpu_clks field is removed from struct davinci_soc_info since it
is no longer needed.
Signed-off-by: NDavid Lechner <david@lechnology.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
上级 4b785cc5
......@@ -634,7 +634,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.init_time = davinci_timer_init,
.init_time = da830_init_time,
.init_machine = da830_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -1477,7 +1477,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.init_time = davinci_timer_init,
.init_time = da850_init_time,
.init_machine = da850_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -427,7 +427,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
.atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm355_init_time,
.init_machine = dm355_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -271,7 +271,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
.atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm355_init_time,
.init_machine = dm355_leopard_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -774,7 +774,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
.atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm365_init_time,
.init_machine = dm365_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -828,7 +828,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
.atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm644x_init_time,
.init_machine = davinci_evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -44,10 +44,8 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/serial.h>
#include <mach/clock.h>
#include "davinci.h"
#include "clock.h"
#define NAND_BLOCK_SIZE SZ_128K
......@@ -716,14 +714,23 @@ static void __init evm_init_i2c(void)
}
#endif
#define DM646X_REF_FREQ 27000000
#define DM646X_AUX_FREQ 24000000
#define DM6467T_EVM_REF_FREQ 33000000
static void __init davinci_map_io(void)
{
dm646x_init();
}
if (machine_is_davinci_dm6467tevm())
davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
static void __init dm646x_evm_init_time(void)
{
dm646x_init_time(DM646X_REF_FREQ, DM646X_AUX_FREQ);
}
static void __init dm6467t_evm_init_time(void)
{
dm646x_init_time(DM6467T_EVM_REF_FREQ, DM646X_AUX_FREQ);
}
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
......@@ -797,7 +804,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm646x_evm_init_time,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......@@ -807,7 +814,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm6467t_evm_init_time,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -566,7 +566,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
.atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.init_time = davinci_timer_init,
.init_time = da850_init_time,
.init_machine = mityomapl138_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -227,7 +227,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
.atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm644x_init_time,
.init_machine = davinci_ntosd2_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -330,7 +330,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
.atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.init_time = davinci_timer_init,
.init_time = da850_init_time,
.init_machine = omapl138_hawk_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -150,7 +150,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
.atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.init_time = davinci_timer_init,
.init_time = dm644x_init_time,
.init_machine = davinci_sffsdr_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
......
......@@ -1200,7 +1200,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
.cpu_clks = da830_clks,
.psc_bases = da830_psc_bases,
.psc_bases_num = ARRAY_SIZE(da830_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
......@@ -1220,6 +1219,10 @@ void __init da830_init(void)
da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
}
davinci_clk_init(davinci_soc_info_da830.cpu_clks);
void __init da830_init_time(void)
{
davinci_clk_init(da830_clks);
davinci_timer_init();
}
......@@ -1353,7 +1353,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
.jtag_id_reg = DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
.cpu_clks = da850_clks,
.psc_bases = da850_psc_bases,
.psc_bases_num = ARRAY_SIZE(da850_psc_bases),
.pinmux_base = DA8XX_SYSCFG0_BASE + 0x120,
......@@ -1392,6 +1391,10 @@ void __init da850_init(void)
v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
}
davinci_clk_init(davinci_soc_info_da850.cpu_clks);
void __init da850_init_time(void)
{
davinci_clk_init(da850_clks);
davinci_timer_init();
}
......@@ -96,7 +96,7 @@ static const char *const da850_boards_compat[] __initconst = {
DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
.map_io = da850_init,
.init_time = davinci_timer_init,
.init_time = da850_init_time,
.init_machine = da850_init_machine,
.dt_compat = da850_boards_compat,
.init_late = davinci_init_late,
......
......@@ -83,6 +83,7 @@ int davinci_init_wdt(void);
/* DM355 function declarations */
void dm355_init(void);
void dm355_init_time(void);
void dm355_init_spi0(unsigned chipselect_mask,
const struct spi_board_info *info, unsigned len);
void dm355_init_asp1(u32 evt_enable);
......@@ -91,6 +92,7 @@ int dm355_gpio_register(void);
/* DM365 function declarations */
void dm365_init(void);
void dm365_init_time(void);
void dm365_init_asp(void);
void dm365_init_vc(void);
void dm365_init_ks(struct davinci_ks_platform_data *pdata);
......@@ -102,12 +104,14 @@ int dm365_gpio_register(void);
/* DM644x function declarations */
void dm644x_init(void);
void dm644x_init_time(void);
void dm644x_init_asp(void);
int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
void dm646x_init_mcasp0(struct snd_platform_data *pdata);
void dm646x_init_mcasp1(struct snd_platform_data *pdata);
int dm646x_init_edma(struct edma_rsv_info *rsv);
......
......@@ -1012,7 +1012,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
.jtag_id_reg = 0x01c40028,
.ids = dm355_ids,
.ids_num = ARRAY_SIZE(dm355_ids),
.cpu_clks = dm355_clks,
.psc_bases = dm355_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
......@@ -1043,7 +1042,12 @@ void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
davinci_map_sysmod();
davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
}
void __init dm355_init_time(void)
{
davinci_clk_init(dm355_clks);
davinci_timer_init();
}
int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
......
......@@ -1116,7 +1116,6 @@ static const struct davinci_soc_info davinci_soc_info_dm365 = {
.jtag_id_reg = 0x01c40028,
.ids = dm365_ids,
.ids_num = ARRAY_SIZE(dm365_ids),
.cpu_clks = dm365_clks,
.psc_bases = dm365_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm365_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
......@@ -1168,7 +1167,12 @@ void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
davinci_map_sysmod();
davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
}
void __init dm365_init_time(void)
{
davinci_clk_init(dm365_clks);
davinci_timer_init();
}
static struct resource dm365_vpss_resources[] = {
......
......@@ -905,7 +905,6 @@ static const struct davinci_soc_info davinci_soc_info_dm644x = {
.jtag_id_reg = 0x01c40028,
.ids = dm644x_ids,
.ids_num = ARRAY_SIZE(dm644x_ids),
.cpu_clks = dm644x_clks,
.psc_bases = dm644x_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
......@@ -931,7 +930,12 @@ void __init dm644x_init(void)
{
davinci_common_init(&davinci_soc_info_dm644x);
davinci_map_sysmod();
davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
}
void __init dm644x_init_time(void)
{
davinci_clk_init(dm644x_clks);
davinci_timer_init();
}
int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
......
......@@ -39,12 +39,6 @@
#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
BIT_MASK(8))
/*
* Device specific clocks
*/
#define DM646X_REF_FREQ 27000000
#define DM646X_AUX_FREQ 24000000
#define DM646X_EMAC_BASE 0x01c80000
#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
#define DM646X_EMAC_CNTRL_OFFSET 0x0000
......@@ -64,13 +58,12 @@ static struct pll_data pll2_data = {
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DM646X_REF_FREQ,
.set_rate = davinci_simple_set_rate,
/* rate is initialized in dm646x_init_time() */
};
static struct clk aux_clkin = {
.name = "aux_clkin",
.rate = DM646X_AUX_FREQ,
/* rate is initialized in dm646x_init_time() */
};
static struct clk pll1_clk = {
......@@ -888,7 +881,6 @@ static const struct davinci_soc_info davinci_soc_info_dm646x = {
.jtag_id_reg = 0x01c40028,
.ids = dm646x_ids,
.ids_num = ARRAY_SIZE(dm646x_ids),
.cpu_clks = dm646x_clks,
.psc_bases = dm646x_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
.pinmux_base = DAVINCI_SYSTEM_MODULE_BASE,
......@@ -956,7 +948,15 @@ void __init dm646x_init(void)
{
davinci_common_init(&davinci_soc_info_dm646x);
davinci_map_sysmod();
davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
}
void __init dm646x_init_time(unsigned long ref_clk_rate,
unsigned long aux_clkin_rate)
{
ref_clk.rate = ref_clk_rate;
aux_clkin.rate = aux_clkin_rate;
davinci_clk_init(dm646x_clks);
davinci_timer_init();
}
static int __init dm646x_init_devices(void)
......
......@@ -53,7 +53,6 @@ struct davinci_soc_info {
u32 jtag_id_reg;
struct davinci_id *ids;
unsigned long ids_num;
struct clk_lookup *cpu_clks;
u32 *psc_bases;
unsigned long psc_bases_num;
u32 pinmux_base;
......
......@@ -88,7 +88,10 @@ extern unsigned int da850_max_speed;
#define DA8XX_ARM_RAM_BASE 0xffff0000
void da830_init(void);
void da830_init_time(void);
void da850_init(void);
void da850_init_time(void);
int da830_register_edma(struct edma_rsv_info *rsv);
int da850_register_edma(struct edma_rsv_info *rsv[2]);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册