Merge tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver pull request for 4.6-rc1.

  Lots of changes in here, Peter has been on a tear again, with lots of
  refactoring and bugs fixes, many thanks to the great work he has been
  doing.  Lots of driver updates and fixes as well, full details in the
  shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits)
  serial: 8250: describe CONFIG_SERIAL_8250_RSA
  serial: samsung: optimize UART rx fifo access routine
  serial: pl011: add mark/space parity support
  serial: sa1100: make sa1100_register_uart_fns a function
  tty: serial: 8250: add MOXA Smartio MUE boards support
  serial: 8250: convert drivers to use up_to_u8250p()
  serial: 8250/mediatek: fix building with SERIAL_8250=m
  serial: 8250/ingenic: fix building with SERIAL_8250=m
  serial: 8250/uniphier: fix modular build
  Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
  Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
  serial: mvebu-uart: initial support for Armada-3700 serial port
  serial: mctrl_gpio: Add missing module license
  serial: ifx6x60: avoid uninitialized variable use
  tty/serial: at91: fix bad offset for UART timeout register
  tty/serial: at91: restore dynamic driver binding
  serial: 8250: Add hardware dependency to RT288X option
  TTY, devpts: document pty count limiting
  tty: goldfish: support platform_device with id -1
  drivers: tty: goldfish: Add device tree bindings
  ...

Documentation/devicetree/bindings/goldfish/tty.txt

+Android Goldfish TTY
+
+Android goldfish tty device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-tty" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_tty@1f004000 {
+		compatible = "google,goldfish-tty";
+		reg = <0x1f004000 0x1000>;
+		interrupts = <0xc>;
+	};

Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt

+* BCM2835 AUXILIAR UART
+
+Required properties:
+
+- compatible: "brcm,bcm2835-aux-uart"
+- reg: The base address of the UART register bank.
+- interrupts: A single interrupt specifier.
+- clocks: Clock driving the hardware; used to figure out the baud rate
+  divisor.
+
+Example:
+
+	uart1: serial@7e215040 {
+		compatible = "brcm,bcm2835-aux-uart";
+		reg = <0x7e215040 0x40>;
+		interrupts = <1 29>;
+		clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+	};

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -19,6 +19,8 @@ Required properties:
     - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
     - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
     - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
+    - "renesas,scif-r8a7792" for R8A7792 (R-Car V2H) SCIF compatible UART.
+    - "renesas,hscif-r8a7792" for R8A7792 (R-Car V2H) HSCIF compatible UART.
     - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
     - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
     - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.

Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt

+* Marvell UART : Non standard UART used in some of Marvell EBU SoCs (e.g., Armada-3700)
+
+Required properties:
+- compatible: "marvell,armada-3700-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Example:
+	serial@12000 {
+		compatible = "marvell,armada-3700-uart";
+		reg = <0x12000 0x400>;
+		interrupts = <43>;
+	};

Documentation/filesystems/devpts.txt

@@ -51,6 +51,15 @@ where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
 /bin/bash in the child process.  A pty created by the sshd is not visible in
 the original mount of /dev/pts.
 
+Total count of pty pairs in all instances is limited by sysctls:
+kernel.pty.max = 4096		- global limit
+kernel.pty.reserve = 1024	- reserve for initial instance
+kernel.pty.nr			- current count of ptys
+
+Per-instance limit could be set by adding mount option "max=<count>".
+This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
+In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
+
 User-space changes
 ------------------
 

Documentation/kernel-parameters.txt

@@ -1064,6 +1064,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			A valid base address must be provided, and the serial
 			port must already be setup and configured.
 
+		armada3700_uart,<addr>
+			Start an early, polled-mode console on the
+			Armada 3700 serial port at the specified
+			address. The serial port must already be setup
+			and configured. Options are not yet supported.
+
 	earlyprintk=	[X86,SH,BLACKFIN,ARM,M68k]
 			earlyprintk=vga
 			earlyprintk=efi

Documentation/serial/tty.txt

@@ -72,9 +72,6 @@ flush_buffer()	-	(optional) May be called at any point between
 			open and close, and instructs the line discipline
 			to empty its input buffer.
 
-chars_in_buffer() -	(optional) Report the number of bytes in the input
-			buffer.
-
 set_termios()	-	(optional) Called on termios structure changes.
 			The caller passes the old termios data and the
 			current data is in the tty. Called under the

Documentation/sysctl/kernel.txt

@@ -66,6 +66,7 @@ show up in /proc/sys/kernel:
 - printk_delay
 - printk_ratelimit
 - printk_ratelimit_burst
+- pty                         ==> Documentation/filesystems/devpts.txt
 - randomize_va_space
 - real-root-dev               ==> Documentation/initrd.txt
 - reboot-cmd                  [ SPARC only ]

MAINTAINERS

@@ -6068,7 +6068,7 @@ S:	Maintained
 F:	drivers/media/platform/rcar_jpu.c
 
 JSM Neo PCI based serial card
-M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
+M:	Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/

arch/alpha/include/asm/serial.h

@@ -14,11 +14,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #define SERIAL_PORT_DFNS			\

arch/arm/mach-omap2/serial.c

@@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 		info = omap_serial_default_info;
 
 	oh = uart->oh;
-	name = DRIVER_NAME;
+	name = OMAP_SERIAL_DRIVER_NAME;
 
 	omap_up.dma_enabled = info->dma_enabled;
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;

arch/frv/include/asm/serial.h

@@ -13,6 +13,6 @@
  */
 #define BASE_BAUD 0
 
-#define STD_COM_FLAGS		ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS		UPF_BOOT_AUTOCONF
 
 #define SERIAL_PORT_DFNS

arch/ia64/kernel/unaligned.c

@@ -1336,8 +1336,11 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			 * Don't call tty_write_message() if we're in the kernel; we might
 			 * be holding locks...
 			 */
-			if (user_mode(regs))
-				tty_write_message(current->signal->tty, buf);
+			if (user_mode(regs)) {
+				struct tty_struct *tty = get_current_tty();
+				tty_write_message(tty, buf);
+				tty_kref_put(tty);
+			}
 			buf[len-1] = '\0';	/* drop '\r' */
 			/* watch for command names containing %s */
 			printk(KERN_WARNING "%s", buf);

arch/m68k/include/asm/serial.h

@@ -18,11 +18,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_ISA

arch/mips/pmcs-msp71xx/msp_serial.c

@@ -110,7 +110,7 @@ void __init msp_serial_setup(void)
 	up.uartclk	= uartclk;
 	up.regshift	= 2;
 	up.iotype	= UPIO_MEM;
-	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	up.type		= PORT_16550A;
 	up.line		= 0;
 	up.serial_out	= msp_serial_out;

arch/mn10300/include/asm/serial.h

@@ -14,15 +14,15 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS	ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS	UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define FOURPORT_FLAGS	ASYNC_FOURPORT
+#define FOURPORT_FLAGS	UPF_FOURPORT
 #define ACCENT_FLAGS	0
 #define BOCA_FLAGS	0
 #define HUB6_FLAGS	0

arch/xtensa/platforms/iss/console.c

@@ -28,10 +28,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#endif
-
 #define SERIAL_MAX_NUM_LINES 1
 #define SERIAL_TIMER_VALUE (HZ / 10)
 

arch/xtensa/platforms/xt2000/setup.c

@@ -113,7 +113,7 @@ void platform_heartbeat(void)
 }
 
 //#define RS_TABLE_SIZE 2
-//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+//#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF|UPF_SKIP_TEST)
 
 #define _SERIAL_PORT(_base,_irq)					\
 {									\

drivers/char/pcmcia/synclink_cs.c

@@ -1349,7 +1349,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
 	/* TODO:disable interrupts instead of reset to preserve signal states */
 	reset_device(info);
 
-	if (!tty || tty->termios.c_cflag & HUPCL) {
+	if (!tty || C_HUPCL(tty)) {
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		set_signals(info);
 	}
@@ -1390,7 +1390,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
 	port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
 	get_signals(info);
 
-	if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
+	if (info->netcount || (tty && C_CREAD(tty)))
 		rx_start(info);
 
 	spin_unlock_irqrestore(&info->lock, flags);
@@ -1733,7 +1733,7 @@ static void mgslpc_throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		mgslpc_send_xchar(tty, STOP_CHAR(tty));
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock, flags);
 		info->serial_signals &= ~SerialSignal_RTS;
 		set_signals(info);
@@ -1762,7 +1762,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty)
 			mgslpc_send_xchar(tty, START_CHAR(tty));
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock, flags);
 		info->serial_signals |= SerialSignal_RTS;
 		set_signals(info);
@@ -2306,8 +2306,7 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 	mgslpc_change_params(info, tty);
 
 	/* Handle transition to B0 status */
-	if (old_termios->c_cflag & CBAUD &&
-	    !(tty->termios.c_cflag & CBAUD)) {
+	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 		spin_lock_irqsave(&info->lock, flags);
 		set_signals(info);
@@ -2315,21 +2314,17 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term
 	}
 
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    tty->termios.c_cflag & CBAUD) {
+	if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
 		info->serial_signals |= SerialSignal_DTR;
-		if (!(tty->termios.c_cflag & CRTSCTS) ||
-		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
 			info->serial_signals |= SerialSignal_RTS;
-		}
 		spin_lock_irqsave(&info->lock, flags);
 		set_signals(info);
 		spin_unlock_irqrestore(&info->lock, flags);
 	}
 
 	/* Handle turning off CRTSCTS */
-	if (old_termios->c_cflag & CRTSCTS &&
-	    !(tty->termios.c_cflag & CRTSCTS)) {
+	if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		tx_release(tty);
 	}

drivers/char/ttyprintk.c

@@ -171,7 +171,7 @@ static const struct tty_operations ttyprintk_ops = {
 	.ioctl = tpk_ioctl,
 };
 
-static struct tty_port_operations null_ops = { };
+static const struct tty_port_operations null_ops = { };
 
 static struct tty_driver *ttyprintk_driver;
 

drivers/isdn/i4l/isdn_tty.c

@@ -1572,7 +1572,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 #endif
 		return;
 	}
-	port->flags |= ASYNC_CLOSING;
+	info->closing = 1;
 
 	tty->closing = 1;
 	/*
@@ -1603,6 +1603,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 	info->ncarrier = 0;
 
 	tty_port_close_end(port, tty);
+	info->closing = 0;
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "isdn_tty_close normal exit\n");
 #endif
@@ -2236,7 +2237,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
 	l = strlen(msg);
 
 	spin_lock_irqsave(&info->readlock, flags);
-	if (port->flags & ASYNC_CLOSING) {
+	if (info->closing) {
 		spin_unlock_irqrestore(&info->readlock, flags);
 		return;
 	}
@@ -2386,13 +2387,12 @@ isdn_tty_modem_result(int code, modem_info *info)
 	case RESULT_NO_CARRIER:
 #ifdef ISDN_DEBUG_MODEM_HUP
 		printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-		       (info->port.flags & ASYNC_CLOSING),
-		       (!info->port.tty));
+		       info->closing, !info->port.tty);
 #endif
 		m->mdmreg[REG_RINGCNT] = 0;
 		del_timer(&info->nc_timer);
 		info->ncarrier = 0;
-		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+		if (info->closing || !info->port.tty)
 			return;
 
 #ifdef CONFIG_ISDN_AUDIO
@@ -2525,7 +2525,7 @@ isdn_tty_modem_result(int code, modem_info *info)
 		}
 	}
 	if (code == RESULT_NO_CARRIER) {
-		if ((info->port.flags & ASYNC_CLOSING) || (!info->port.tty))
+		if (info->closing || (!info->port.tty))
 			return;
 
 		if (info->port.flags & ASYNC_CHECK_CD)

drivers/mmc/card/sdio_uart.c

@@ -493,7 +493,7 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
 	if (status & UART_MSR_DCTS) {
 		port->icount.cts++;
 		tty = tty_port_tty_get(&port->port);
-		if (tty && (tty->termios.c_cflag & CRTSCTS)) {
+		if (tty && C_CRTSCTS(tty)) {
 			int cts = (status & UART_MSR_CTS);
 			if (tty->hw_stopped) {
 				if (cts) {
@@ -648,10 +648,10 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
 
 	sdio_uart_change_speed(port, &tty->termios, NULL);
 
-	if (tty->termios.c_cflag & CBAUD)
+	if (C_BAUD(tty))
 		sdio_uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
 
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
 			tty->hw_stopped = 1;
 
@@ -833,7 +833,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
 {
 	struct sdio_uart_port *port = tty->driver_data;
 
-	if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
+	if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
 		return;
 
 	if (sdio_uart_claim_func(port) != 0)
@@ -844,7 +844,7 @@ static void sdio_uart_throttle(struct tty_struct *tty)
 		sdio_uart_start_tx(port);
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		sdio_uart_clear_mctrl(port, TIOCM_RTS);
 
 	sdio_uart_irq(port->func);
@@ -855,7 +855,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
 {
 	struct sdio_uart_port *port = tty->driver_data;
 
-	if (!I_IXOFF(tty) && !(tty->termios.c_cflag & CRTSCTS))
+	if (!I_IXOFF(tty) && !C_CRTSCTS(tty))
 		return;
 
 	if (sdio_uart_claim_func(port) != 0)
@@ -870,7 +870,7 @@ static void sdio_uart_unthrottle(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		sdio_uart_set_mctrl(port, TIOCM_RTS);
 
 	sdio_uart_irq(port->func);

drivers/net/irda/irtty-sir.c

@@ -430,16 +430,6 @@ static int irtty_open(struct tty_struct *tty)
 
 	/* Module stuff handled via irda_ldisc.owner - Jean II */
 
-	/* First make sure we're not already connected. */
-	if (tty->disc_data != NULL) {
-		priv = tty->disc_data;
-		if (priv && priv->magic == IRTTY_MAGIC) {
-			ret = -EEXIST;
-			goto out;
-		}
-		tty->disc_data = NULL;		/* ### */
-	}
-
 	/* stop the underlying  driver */
 	irtty_stop_receiver(tty, TRUE);
 	if (tty->ops->stop)

drivers/of/fdt.c

@@ -796,14 +796,13 @@ static inline void early_init_dt_check_for_initrd(unsigned long node)
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_SERIAL_EARLYCON
-extern struct of_device_id __earlycon_of_table[];
 
 static int __init early_init_dt_scan_chosen_serial(void)
 {
 	int offset;
-	const char *p;
+	const char *p, *q, *options = NULL;
 	int l;
-	const struct of_device_id *match = __earlycon_of_table;
+	const struct earlycon_id *match;
 	const void *fdt = initial_boot_params;
 
 	offset = fdt_path_offset(fdt, "/chosen");
@@ -818,27 +817,26 @@ static int __init early_init_dt_scan_chosen_serial(void)
 	if (!p || !l)
 		return -ENOENT;
 
-	/* Remove console options if present */
-	l = strchrnul(p, ':') - p;
+	q = strchrnul(p, ':');
+	if (*q != '\0')
+		options = q + 1;
+	l = q - p;
 
 	/* Get the node specified by stdout-path */
 	offset = fdt_path_offset_namelen(fdt, p, l);
-	if (offset < 0)
-		return -ENODEV;
-
-	while (match->compatible[0]) {
-		u64 addr;
+	if (offset < 0) {
+		pr_warn("earlycon: stdout-path %.*s not found\n", l, p);
+		return 0;
+	}
 
-		if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
-			match++;
+	for (match = __earlycon_table; match < __earlycon_table_end; match++) {
+		if (!match->compatible[0])
 			continue;
-		}
 
-		addr = fdt_translate_address(fdt, offset);
-		if (addr == OF_BAD_ADDR)
-			return -ENXIO;
+		if (fdt_node_check_compatible(fdt, offset, match->compatible))
+			continue;
 
-		of_setup_earlycon(addr, match->data);
+		of_setup_earlycon(match, offset, options);
 		return 0;
 	}
 	return -ENODEV;

drivers/of/fdt_address.c

@@ -161,7 +161,7 @@ static int __init fdt_translate_one(const void *blob, int parent,
  * that can be mapped to a cpu physical address). This is not really specified
  * that way, but this is traditionally the way IBM at least do things
  */
-u64 __init fdt_translate_address(const void *blob, int node_offset)
+static u64 __init fdt_translate_address(const void *blob, int node_offset)
 {
 	int parent, len;
 	const struct of_bus *bus, *pbus;
@@ -239,3 +239,12 @@ u64 __init fdt_translate_address(const void *blob, int node_offset)
  bail:
 	return result;
 }
+
+/**
+ * of_flat_dt_translate_address - translate DT addr into CPU phys addr
+ * @node: node in the flat blob
+ */
+u64 __init of_flat_dt_translate_address(unsigned long node)
+{
+	return fdt_translate_address(initial_boot_params, node);
+}

drivers/s390/char/con3215.c

@@ -643,7 +643,6 @@ static void raw3215_shutdown(struct raw3215_info *raw)
 	if ((raw->flags & RAW3215_WORKING) ||
 	    raw->queued_write != NULL ||
 	    raw->queued_read != NULL) {
-		raw->port.flags |= ASYNC_CLOSING;
 		add_wait_queue(&raw->empty_wait, &wait);
 		set_current_state(TASK_INTERRUPTIBLE);
 		spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
@@ -651,7 +650,7 @@ static void raw3215_shutdown(struct raw3215_info *raw)
 		spin_lock_irqsave(get_ccwdev_lock(raw->cdev), flags);
 		remove_wait_queue(&raw->empty_wait, &wait);
 		set_current_state(TASK_RUNNING);
-		raw->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING);
+		raw->port.flags &= ~ASYNC_INITIALIZED;
 	}
 	spin_unlock_irqrestore(get_ccwdev_lock(raw->cdev), flags);
 }

drivers/staging/dgap/dgap.c

@@ -1530,7 +1530,7 @@ static void dgap_input(struct channel_t *ch)
 	if ((bd->state != BOARD_READY) || !tp  ||
 	    (tp->magic != TTY_MAGIC) ||
 	    !(ch->ch_tun.un_flags & UN_ISOPEN) ||
-	    !(tp->termios.c_cflag & CREAD) ||
+	    !C_CREAD(tp) ||
 	    (ch->ch_tun.un_flags & UN_CLOSING)) {
 		writew(head, &bs->rx_tail);
 		writeb(1, &bs->idata);
@@ -1665,9 +1665,7 @@ static void dgap_input(struct channel_t *ch)
 }
 
 static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
-			      struct un_t *un, u32 mask,
-			      unsigned long *irq_flags1,
-			      unsigned long *irq_flags2)
+			      struct un_t *un, u32 mask)
 {
 	if (!(un->un_flags & mask))
 		return;
@@ -1677,17 +1675,7 @@ static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch,
 	if (!(un->un_flags & UN_ISOPEN))
 		return;
 
-	if ((un->un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-	    un->un_tty->ldisc->ops->write_wakeup) {
-		spin_unlock_irqrestore(&ch->ch_lock, *irq_flags2);
-		spin_unlock_irqrestore(&bd->bd_lock, *irq_flags1);
-
-		(un->un_tty->ldisc->ops->write_wakeup)(un->un_tty);
-
-		spin_lock_irqsave(&bd->bd_lock, *irq_flags1);
-		spin_lock_irqsave(&ch->ch_lock, *irq_flags2);
-	}
-	wake_up_interruptible(&un->un_tty->write_wait);
+	tty_wakeup(un->un_tty);
 	wake_up_interruptible(&un->un_flags_wait);
 }
 
@@ -1952,10 +1940,8 @@ static int dgap_event(struct board_t *bd)
 		 * Process Transmit low.
 		 */
 		if (reason & IFTLW) {
-			dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW,
-					  &lock_flags, &lock_flags2);
-			dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW,
-					  &lock_flags, &lock_flags2);
+			dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW);
+			dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW);
 			if (ch->ch_flags & CH_WLOW) {
 				ch->ch_flags &= ~CH_WLOW;
 				wake_up_interruptible(&ch->ch_flags_wait);
@@ -1966,10 +1952,8 @@ static int dgap_event(struct board_t *bd)
 		 * Process Transmit empty.
 		 */
 		if (reason & IFTEM) {
-			dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY,
-					  &lock_flags, &lock_flags2);
-			dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY,
-					  &lock_flags, &lock_flags2);
+			dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY);
+			dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY);
 			if (ch->ch_flags & CH_WEMPTY) {
 				ch->ch_flags &= ~CH_WEMPTY;
 				wake_up_interruptible(&ch->ch_flags_wait);
@@ -3171,8 +3155,6 @@ static void dgap_tty_flush_buffer(struct tty_struct *tty)
 
 	spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
 	spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
 	tty_wakeup(tty);
 }
 
@@ -4969,10 +4951,6 @@ static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd,
 			ch->ch_pun.un_flags &= ~(UN_LOW | UN_EMPTY);
 			wake_up_interruptible(&ch->ch_pun.un_flags_wait);
 		}
-		if (waitqueue_active(&tty->write_wait))
-			wake_up_interruptible(&tty->write_wait);
-
-		/* Can't hold any locks when calling tty_wakeup! */
 		spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
 		spin_unlock_irqrestore(&bd->bd_lock, lock_flags);
 		tty_wakeup(tty);

drivers/staging/dgnc/dgnc_tty.c

@@ -541,7 +541,7 @@ void dgnc_input(struct channel_t *ch)
 	 */
 	if (!tp || (tp->magic != TTY_MAGIC) ||
 	    !(ch->ch_tun.un_flags & UN_ISOPEN) ||
-	    !(tp->termios.c_cflag & CREAD) ||
+	    !C_CREAD(tp) ||
 	    (ch->ch_tun.un_flags & UN_CLOSING)) {
 		ch->ch_r_head = tail;
 
@@ -933,14 +933,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
 	}
 
 	if (ch->ch_tun.un_flags & UN_ISOPEN) {
-		if ((ch->ch_tun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-		    ch->ch_tun.un_tty->ldisc->ops->write_wakeup) {
-			spin_unlock_irqrestore(&ch->ch_lock, flags);
-			ch->ch_tun.un_tty->ldisc->ops->write_wakeup(ch->ch_tun.un_tty);
-			spin_lock_irqsave(&ch->ch_lock, flags);
-		}
-
-		wake_up_interruptible(&ch->ch_tun.un_tty->write_wait);
+		tty_wakeup(ch->ch_tun.un_tty);
 
 		/*
 		 * If unit is set to wait until empty, check to make sure
@@ -975,14 +968,7 @@ void dgnc_wakeup_writes(struct channel_t *ch)
 	}
 
 	if (ch->ch_pun.un_flags & UN_ISOPEN) {
-		if ((ch->ch_pun.un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-		    ch->ch_pun.un_tty->ldisc->ops->write_wakeup) {
-			spin_unlock_irqrestore(&ch->ch_lock, flags);
-			ch->ch_pun.un_tty->ldisc->ops->write_wakeup(ch->ch_pun.un_tty);
-			spin_lock_irqsave(&ch->ch_lock, flags);
-		}
-
-		wake_up_interruptible(&ch->ch_pun.un_tty->write_wait);
+		tty_wakeup(ch->ch_pun.un_tty);
 
 		/*
 		 * If unit is set to wait until empty, check to make sure

drivers/tty/Kconfig

@@ -226,7 +226,7 @@ config CYCLADES
 
 config CYZ_INTR
 	bool "Cyclades-Z interrupt mode operation"
-	depends on CYCLADES
+	depends on CYCLADES && PCI
 	help
 	  The Cyclades-Z family of multiport cards allows 2 (two) driver op
 	  modes: polling and interrupt. In polling mode, the driver will check

drivers/tty/amiserial.c

@@ -639,7 +639,7 @@ static void shutdown(struct tty_struct *tty, struct serial_state *info)
 	custom.adkcon = AC_UARTBRK;
 	mb();
 
-	if (tty->termios.c_cflag & HUPCL)
+	if (C_HUPCL(tty))
 		info->MCR &= ~(SER_DTR|SER_RTS);
 	rtsdtr_ctrl(info->MCR);
 
@@ -965,8 +965,7 @@ static void rs_throttle(struct tty_struct * tty)
 	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
-	printk("throttle %s: %d....\n", tty_name(tty),
-	       tty->ldisc.chars_in_buffer(tty));
+	printk("throttle %s ....\n", tty_name(tty));
 #endif
 
 	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
@@ -975,7 +974,7 @@ static void rs_throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		rs_send_xchar(tty, STOP_CHAR(tty));
 
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		info->MCR &= ~SER_RTS;
 
 	local_irq_save(flags);
@@ -988,8 +987,7 @@ static void rs_unthrottle(struct tty_struct * tty)
 	struct serial_state *info = tty->driver_data;
 	unsigned long flags;
 #ifdef SERIAL_DEBUG_THROTTLE
-	printk("unthrottle %s: %d....\n", tty_name(tty),
-	       tty->ldisc.chars_in_buffer(tty));
+	printk("unthrottle %s ....\n", tty_name(tty));
 #endif
 
 	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
@@ -1001,7 +999,7 @@ static void rs_unthrottle(struct tty_struct * tty)
 		else
 			rs_send_xchar(tty, START_CHAR(tty));
 	}
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		info->MCR |= SER_RTS;
 	local_irq_save(flags);
 	rtsdtr_ctrl(info->MCR);
@@ -1334,8 +1332,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	change_speed(tty, info, old_termios);
 
 	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) &&
-	    !(cflag & CBAUD)) {
+	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) {
 		info->MCR &= ~(SER_DTR|SER_RTS);
 		local_irq_save(flags);
 		rtsdtr_ctrl(info->MCR);
@@ -1343,21 +1340,17 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	}
 
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) &&
-	    (cflag & CBAUD)) {
+	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
 		info->MCR |= SER_DTR;
-		if (!(tty->termios.c_cflag & CRTSCTS) || 
-		    !test_bit(TTY_THROTTLED, &tty->flags)) {
+		if (!C_CRTSCTS(tty) || !test_bit(TTY_THROTTLED, &tty->flags))
 			info->MCR |= SER_RTS;
-		}
 		local_irq_save(flags);
 		rtsdtr_ctrl(info->MCR);
 		local_irq_restore(flags);
 	}
 
 	/* Handle turning off CRTSCTS */
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios.c_cflag & CRTSCTS)) {
+	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		rs_start(tty);
 	}
@@ -1369,8 +1362,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	 * XXX  It's not clear whether the current behavior is correct
 	 * or not.  Hence, this may change.....
 	 */
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios.c_cflag & CLOCAL))
+	if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
 		wake_up_interruptible(&info->open_wait);
 #endif
 }

drivers/tty/cyclades.c

@@ -1440,7 +1440,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 			info->port.xmit_buf = NULL;
 			free_page((unsigned long)temp);
 		}
-		if (tty->termios.c_cflag & HUPCL)
+		if (C_HUPCL(tty))
 			cyy_change_rts_dtr(info, 0, TIOCM_RTS | TIOCM_DTR);
 
 		cyy_issue_cmd(info, CyCHAN_CTL | CyDIS_RCVR);
@@ -1469,7 +1469,7 @@ static void cy_shutdown(struct cyclades_port *info, struct tty_struct *tty)
 			free_page((unsigned long)temp);
 		}
 
-		if (tty->termios.c_cflag & HUPCL)
+		if (C_HUPCL(tty))
 			tty_port_lower_dtr_rts(&info->port);
 
 		set_bit(TTY_IO_ERROR, &tty->flags);
@@ -2795,8 +2795,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 
 	cy_set_line_char(info, tty);
 
-	if ((old_termios->c_cflag & CRTSCTS) &&
-			!(tty->termios.c_cflag & CRTSCTS)) {
+	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		cy_start(tty);
 	}
@@ -2807,8 +2806,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 	 * XXX  It's not clear whether the current behavior is correct
 	 * or not.  Hence, this may change.....
 	 */
-	if (!(old_termios->c_cflag & CLOCAL) &&
-	    (tty->termios.c_cflag & CLOCAL))
+	if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
 		wake_up_interruptible(&info->port.open_wait);
 #endif
 }				/* cy_set_termios */
@@ -2852,8 +2850,8 @@ static void cy_throttle(struct tty_struct *tty)
 	unsigned long flags;
 
 #ifdef CY_DEBUG_THROTTLE
-	printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty),
-			tty->ldisc.chars_in_buffer(tty), info->line);
+	printk(KERN_DEBUG "cyc:throttle %s ...ttyC%d\n", tty_name(tty),
+			 info->line);
 #endif
 
 	if (serial_paranoia_check(info, tty->name, "cy_throttle"))
@@ -2868,7 +2866,7 @@ static void cy_throttle(struct tty_struct *tty)
 			info->throttle = 1;
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		if (!cy_is_Z(card)) {
 			spin_lock_irqsave(&card->card_lock, flags);
 			cyy_change_rts_dtr(info, 0, TIOCM_RTS);
@@ -2891,8 +2889,8 @@ static void cy_unthrottle(struct tty_struct *tty)
 	unsigned long flags;
 
 #ifdef CY_DEBUG_THROTTLE
-	printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
-		tty_name(tty), tty_chars_in_buffer(tty), info->line);
+	printk(KERN_DEBUG "cyc:unthrottle %s ...ttyC%d\n",
+		tty_name(tty), info->line);
 #endif
 
 	if (serial_paranoia_check(info, tty->name, "cy_unthrottle"))
@@ -2905,7 +2903,7 @@ static void cy_unthrottle(struct tty_struct *tty)
 			cy_send_xchar(tty, START_CHAR(tty));
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		card = info->card;
 		if (!cy_is_Z(card)) {
 			spin_lock_irqsave(&card->card_lock, flags);

drivers/tty/ehv_bytechan.c

@@ -23,7 +23,6 @@
  * byte channel used for the console is designated as the default tty.
  */
 
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/err.h>
@@ -719,19 +718,6 @@ static int ehv_bc_tty_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int ehv_bc_tty_remove(struct platform_device *pdev)
-{
-	struct ehv_bc_data *bc = dev_get_drvdata(&pdev->dev);
-
-	tty_unregister_device(ehv_bc_driver, bc - bcs);
-
-	tty_port_destroy(&bc->port);
-	irq_dispose_mapping(bc->tx_irq);
-	irq_dispose_mapping(bc->rx_irq);
-
-	return 0;
-}
-
 static const struct of_device_id ehv_bc_tty_of_ids[] = {
 	{ .compatible = "epapr,hv-byte-channel" },
 	{}
@@ -741,15 +727,15 @@ static struct platform_driver ehv_bc_tty_driver = {
 	.driver = {
 		.name = "ehv-bc",
 		.of_match_table = ehv_bc_tty_of_ids,
+		.suppress_bind_attrs = true,
 	},
 	.probe		= ehv_bc_tty_probe,
-	.remove		= ehv_bc_tty_remove,
 };
 
 /**
  * ehv_bc_init - ePAPR hypervisor byte channel driver initialization
  *
- * This function is called when this module is loaded.
+ * This function is called when this driver is loaded.
  */
 static int __init ehv_bc_init(void)
 {
@@ -814,24 +800,4 @@ static int __init ehv_bc_init(void)
 
 	return ret;
 }
-
-
-/**
- * ehv_bc_exit - ePAPR hypervisor byte channel driver termination
- *
- * This function is called when this driver is unloaded.
- */
-static void __exit ehv_bc_exit(void)
-{
-	platform_driver_unregister(&ehv_bc_tty_driver);
-	tty_unregister_driver(ehv_bc_driver);
-	put_tty_driver(ehv_bc_driver);
-	kfree(bcs);
-}
-
-module_init(ehv_bc_init);
-module_exit(ehv_bc_exit);
-
-MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
-MODULE_DESCRIPTION("ePAPR hypervisor byte channel driver");
-MODULE_LICENSE("GPL v2");
+device_initcall(ehv_bc_init);

drivers/tty/goldfish.c

@@ -68,8 +68,7 @@ static void goldfish_tty_do_write(int line, const char *buf, unsigned count)
 
 static irqreturn_t goldfish_tty_interrupt(int irq, void *dev_id)
 {
-	struct platform_device *pdev = dev_id;
-	struct goldfish_tty *qtty = &goldfish_ttys[pdev->id];
+	struct goldfish_tty *qtty = dev_id;
 	void __iomem *base = qtty->base;
 	unsigned long irq_flags;
 	unsigned char *buf;
@@ -162,7 +161,7 @@ static int goldfish_tty_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct tty_port_operations goldfish_port_ops = {
+static const struct tty_port_operations goldfish_port_ops = {
 	.activate = goldfish_tty_activate,
 	.shutdown = goldfish_tty_shutdown
 };
@@ -233,6 +232,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 	struct device *ttydev;
 	void __iomem *base;
 	u32 irq;
+	unsigned int line;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL)
@@ -248,10 +248,16 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 
 	irq = r->start;
 
-	if (pdev->id >= goldfish_tty_line_count)
-		goto err_unmap;
-
 	mutex_lock(&goldfish_tty_lock);
+
+	if (pdev->id == PLATFORM_DEVID_NONE)
+		line = goldfish_tty_current_line_count;
+	else
+		line = pdev->id;
+
+	if (line >= goldfish_tty_line_count)
+		goto err_create_driver_failed;
+
 	if (goldfish_tty_current_line_count == 0) {
 		ret = goldfish_tty_create_driver();
 		if (ret)
@@ -259,7 +265,7 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 	}
 	goldfish_tty_current_line_count++;
 
-	qtty = &goldfish_ttys[pdev->id];
+	qtty = &goldfish_ttys[line];
 	spin_lock_init(&qtty->lock);
 	tty_port_init(&qtty->port);
 	qtty->port.ops = &goldfish_port_ops;
@@ -269,13 +275,13 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 	writel(GOLDFISH_TTY_CMD_INT_DISABLE, base + GOLDFISH_TTY_CMD);
 
 	ret = request_irq(irq, goldfish_tty_interrupt, IRQF_SHARED,
-						"goldfish_tty", pdev);
+						"goldfish_tty", qtty);
 	if (ret)
 		goto err_request_irq_failed;
 
 
 	ttydev = tty_port_register_device(&qtty->port, goldfish_tty_driver,
-							pdev->id, &pdev->dev);
+							line, &pdev->dev);
 	if (IS_ERR(ttydev)) {
 		ret = PTR_ERR(ttydev);
 		goto err_tty_register_device_failed;
@@ -286,8 +292,9 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 	qtty->console.device = goldfish_tty_console_device;
 	qtty->console.setup = goldfish_tty_console_setup;
 	qtty->console.flags = CON_PRINTBUFFER;
-	qtty->console.index = pdev->id;
+	qtty->console.index = line;
 	register_console(&qtty->console);
+	platform_set_drvdata(pdev, qtty);
 
 	mutex_unlock(&goldfish_tty_lock);
 	return 0;
@@ -307,13 +314,12 @@ static int goldfish_tty_probe(struct platform_device *pdev)
 
 static int goldfish_tty_remove(struct platform_device *pdev)
 {
-	struct goldfish_tty *qtty;
+	struct goldfish_tty *qtty = platform_get_drvdata(pdev);
 
 	mutex_lock(&goldfish_tty_lock);
 
-	qtty = &goldfish_ttys[pdev->id];
 	unregister_console(&qtty->console);
-	tty_unregister_device(goldfish_tty_driver, pdev->id);
+	tty_unregister_device(goldfish_tty_driver, qtty->console.index);
 	iounmap(qtty->base);
 	qtty->base = NULL;
 	free_irq(qtty->irq, pdev);
@@ -324,11 +330,19 @@ static int goldfish_tty_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id goldfish_tty_of_match[] = {
+	{ .compatible = "google,goldfish-tty", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, goldfish_tty_of_match);
+
 static struct platform_driver goldfish_tty_platform_driver = {
 	.probe = goldfish_tty_probe,
 	.remove = goldfish_tty_remove,
 	.driver = {
-		.name = "goldfish_tty"
+		.name = "goldfish_tty",
+		.of_match_table = goldfish_tty_of_match,
 	}
 };
 

drivers/tty/hvc/hvc_vio.c

@@ -41,7 +41,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/console.h>
-#include <linux/module.h>
 
 #include <asm/hvconsole.h>
 #include <asm/vio.h>
@@ -61,7 +60,6 @@ static struct vio_device_id hvc_driver_table[] = {
 #endif
 	{ "", "" }
 };
-MODULE_DEVICE_TABLE(vio, hvc_driver_table);
 
 typedef enum hv_protocol {
 	HV_PROTOCOL_RAW,
@@ -363,26 +361,13 @@ static int hvc_vio_probe(struct vio_dev *vdev,
 	return 0;
 }
 
-static int hvc_vio_remove(struct vio_dev *vdev)
-{
-	struct hvc_struct *hp = dev_get_drvdata(&vdev->dev);
-	int rc, termno;
-
-	termno = hp->vtermno;
-	rc = hvc_remove(hp);
-	if (rc == 0) {
-		if (hvterm_privs[termno] != &hvterm_priv0)
-			kfree(hvterm_privs[termno]);
-		hvterm_privs[termno] = NULL;
-	}
-	return rc;
-}
-
 static struct vio_driver hvc_vio_driver = {
 	.id_table	= hvc_driver_table,
 	.probe		= hvc_vio_probe,
-	.remove		= hvc_vio_remove,
 	.name		= hvc_driver_name,
+	.driver = {
+		.suppress_bind_attrs	= true,
+	},
 };
 
 static int __init hvc_vio_init(void)
@@ -394,13 +379,7 @@ static int __init hvc_vio_init(void)
 
 	return rc;
 }
-module_init(hvc_vio_init); /* after drivers/char/hvc_console.c */
-
-static void __exit hvc_vio_exit(void)
-{
-	vio_unregister_driver(&hvc_vio_driver);
-}
-module_exit(hvc_vio_exit);
+device_initcall(hvc_vio_init); /* after drivers/tty/hvc/hvc_console.c */
 
 void __init hvc_vio_init_early(void)
 {

drivers/tty/hvc/hvc_xen.c

@@ -162,7 +162,7 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
 	return recv;
 }
 
-static struct hv_ops domU_hvc_ops = {
+static const struct hv_ops domU_hvc_ops = {
 	.get_chars = domU_read_console,
 	.put_chars = domU_write_console,
 	.notifier_add = notifier_add_irq,
@@ -188,7 +188,7 @@ static int dom0_write_console(uint32_t vtermno, const char *str, int len)
 	return len;
 }
 
-static struct hv_ops dom0_hvc_ops = {
+static const struct hv_ops dom0_hvc_ops = {
 	.get_chars = dom0_read_console,
 	.put_chars = dom0_write_console,
 	.notifier_add = notifier_add_irq,
@@ -323,6 +323,7 @@ void xen_console_resume(void)
 	}
 }
 
+#ifdef CONFIG_HVC_XEN_FRONTEND
 static void xencons_disconnect_backend(struct xencons_info *info)
 {
 	if (info->irq > 0)
@@ -363,7 +364,6 @@ static int xen_console_remove(struct xencons_info *info)
 	return 0;
 }
 
-#ifdef CONFIG_HVC_XEN_FRONTEND
 static int xencons_remove(struct xenbus_device *dev)
 {
 	return xen_console_remove(dev_get_drvdata(&dev->dev));

drivers/tty/isicom.c

@@ -1204,8 +1204,7 @@ static void isicom_set_termios(struct tty_struct *tty,
 	isicom_config_port(tty);
 	spin_unlock_irqrestore(&port->card->card_lock, flags);
 
-	if ((old_termios->c_cflag & CRTSCTS) &&
-			!(tty->termios.c_cflag & CRTSCTS)) {
+	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		isicom_start(tty);
 	}

drivers/tty/mxser.c

@@ -254,6 +254,7 @@ struct mxser_port {
 	int xmit_head;
 	int xmit_tail;
 	int xmit_cnt;
+	int closing;
 
 	struct ktermios normal_termios;
 
@@ -1081,6 +1082,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 		return;
 	if (tty_port_close_start(port, tty, filp) == 0)
 		return;
+	info->closing = 1;
 	mutex_lock(&port->mutex);
 	mxser_close_port(port);
 	mxser_flush_buffer(tty);
@@ -1091,6 +1093,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
 	mxser_shutdown_port(port);
 	clear_bit(ASYNCB_INITIALIZED, &port->flags);
 	mutex_unlock(&port->mutex);
+	info->closing = 0;
 	/* Right now the tty_port set is done outside of the close_end helper
 	   as we don't yet have everyone using refcounts */	
 	tty_port_close_end(port, tty);
@@ -1864,7 +1867,7 @@ static void mxser_stoprx(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		info->MCR &= ~UART_MCR_RTS;
 		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
@@ -1901,7 +1904,7 @@ static void mxser_unthrottle(struct tty_struct *tty)
 		}
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS) {
+	if (C_CRTSCTS(tty)) {
 		info->MCR |= UART_MCR_RTS;
 		outb(info->MCR, info->ioaddr + UART_MCR);
 	}
@@ -1949,15 +1952,13 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi
 	mxser_change_speed(tty, old_termios);
 	spin_unlock_irqrestore(&info->slock, flags);
 
-	if ((old_termios->c_cflag & CRTSCTS) &&
-			!(tty->termios.c_cflag & CRTSCTS)) {
+	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
 		tty->hw_stopped = 0;
 		mxser_start(tty);
 	}
 
 	/* Handle sw stopped */
-	if ((old_termios->c_iflag & IXON) &&
-			!(tty->termios.c_iflag & IXON)) {
+	if ((old_termios->c_iflag & IXON) && !I_IXON(tty)) {
 		tty->stopped = 0;
 
 		if (info->board->chip_flag) {
@@ -2255,10 +2256,8 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id)
 					break;
 				iir &= MOXA_MUST_IIR_MASK;
 				tty = tty_port_tty_get(&port->port);
-				if (!tty ||
-						(port->port.flags & ASYNC_CLOSING) ||
-						!(port->port.flags &
-							ASYNC_INITIALIZED)) {
+				if (!tty || port->closing ||
+				    !(port->port.flags & ASYNC_INITIALIZED)) {
 					status = inb(port->ioaddr + UART_LSR);
 					outb(0x27, port->ioaddr + UART_FCR);
 					inb(port->ioaddr + UART_MSR);
@@ -2337,7 +2336,7 @@ static const struct tty_operations mxser_ops = {
 	.get_icount = mxser_get_icount,
 };
 
-static struct tty_port_operations mxser_port_ops = {
+static const struct tty_port_operations mxser_port_ops = {
 	.carrier_raised = mxser_carrier_raised,
 	.dtr_rts = mxser_dtr_rts,
 	.activate = mxser_activate,

drivers/tty/n_gsm.c

@@ -1066,7 +1066,7 @@ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
 	/* Carrier drop -> hangup */
 	if (tty) {
 		if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
-			if (!(tty->termios.c_cflag & CLOCAL))
+			if (!C_CLOCAL(tty))
 				tty_hangup(tty);
 	}
 	if (brk & 0x01)
@@ -2303,21 +2303,6 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	/* If clogged call tty_throttle(tty); */
 }
 
-/**
- *	gsmld_chars_in_buffer	-	report available bytes
- *	@tty: tty device
- *
- *	Report the number of characters buffered to be delivered to user
- *	at this instant in time.
- *
- *	Locking: gsm lock
- */
-
-static ssize_t gsmld_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
 /**
  *	gsmld_flush_buffer	-	clean input queue
  *	@tty:	terminal device
@@ -2830,7 +2815,6 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
 	.open            = gsmld_open,
 	.close           = gsmld_close,
 	.flush_buffer    = gsmld_flush_buffer,
-	.chars_in_buffer = gsmld_chars_in_buffer,
 	.read            = gsmld_read,
 	.write           = gsmld_write,
 	.ioctl           = gsmld_ioctl,
@@ -3132,7 +3116,7 @@ static void gsmtty_throttle(struct tty_struct *tty)
 	struct gsm_dlci *dlci = tty->driver_data;
 	if (dlci->state == DLCI_CLOSED)
 		return;
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		dlci->modem_tx &= ~TIOCM_DTR;
 	dlci->throttled = 1;
 	/* Send an MSC with DTR cleared */
@@ -3144,7 +3128,7 @@ static void gsmtty_unthrottle(struct tty_struct *tty)
 	struct gsm_dlci *dlci = tty->driver_data;
 	if (dlci->state == DLCI_CLOSED)
 		return;
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (C_CRTSCTS(tty))
 		dlci->modem_tx |= TIOCM_DTR;
 	dlci->throttled = 0;
 	/* Send an MSC with DTR set */

drivers/tty/n_hdlc.c

@@ -159,7 +159,6 @@ struct n_hdlc {
 /*
  * HDLC buffer list manipulation functions
  */
-static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
 			   struct n_hdlc_buf *buf);
 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
@@ -853,10 +852,10 @@ static struct n_hdlc *n_hdlc_alloc(void)
 	if (!n_hdlc)
 		return NULL;
 
-	n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
-	n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
-	n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
-	n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
+	spin_lock_init(&n_hdlc->rx_free_buf_list.spinlock);
+	spin_lock_init(&n_hdlc->tx_free_buf_list.spinlock);
+	spin_lock_init(&n_hdlc->rx_buf_list.spinlock);
+	spin_lock_init(&n_hdlc->tx_buf_list.spinlock);
 	
 	/* allocate free rx buffer list */
 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
@@ -884,16 +883,6 @@ static struct n_hdlc *n_hdlc_alloc(void)
 	
 }	/* end of n_hdlc_alloc() */
 
-/**
- * n_hdlc_buf_list_init - initialize specified HDLC buffer list
- * @list - pointer to buffer list
- */
-static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
-{
-	memset(list, 0, sizeof(*list));
-	spin_lock_init(&list->spinlock);
-}	/* end of n_hdlc_buf_list_init() */
-
 /**
  * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
  * @list - pointer to buffer list

drivers/tty/n_tty.c

@@ -113,8 +113,6 @@ struct n_tty_data {
 	DECLARE_BITMAP(read_flags, N_TTY_BUF_SIZE);
 	unsigned char echo_buf[N_TTY_BUF_SIZE];
 
-	int minimum_to_wake;
-
 	/* consumer-published */
 	size_t read_tail;
 	size_t line_start;
@@ -153,15 +151,6 @@ static inline unsigned char *echo_buf_addr(struct n_tty_data *ldata, size_t i)
 	return &ldata->echo_buf[i & (N_TTY_BUF_SIZE - 1)];
 }
 
-static inline int tty_put_user(struct tty_struct *tty, unsigned char x,
-			       unsigned char __user *ptr)
-{
-	struct n_tty_data *ldata = tty->disc_data;
-
-	tty_audit_add_data(tty, &x, 1, ldata->icanon);
-	return put_user(x, ptr);
-}
-
 static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
 			    size_t tail, size_t n)
 {
@@ -171,7 +160,7 @@ static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
 	int uncopied;
 
 	if (n > size) {
-		tty_audit_add_data(tty, from, size, ldata->icanon);
+		tty_audit_add_data(tty, from, size);
 		uncopied = copy_to_user(to, from, size);
 		if (uncopied)
 			return uncopied;
@@ -180,7 +169,7 @@ static int tty_copy_to_user(struct tty_struct *tty, void __user *to,
 		from = ldata->read_buf;
 	}
 
-	tty_audit_add_data(tty, from, n, ldata->icanon);
+	tty_audit_add_data(tty, from, n);
 	return copy_to_user(to, from, n);
 }
 
@@ -239,8 +228,8 @@ static ssize_t chars_in_buffer(struct tty_struct *tty)
 
 static void n_tty_write_wakeup(struct tty_struct *tty)
 {
-	if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
-		kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
+	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+	kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
 }
 
 static void n_tty_check_throttle(struct tty_struct *tty)
@@ -272,8 +261,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
 	if (tty->driver->type == TTY_DRIVER_TYPE_PTY) {
 		if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
 			return;
-		if (!tty->count)
-			return;
 		n_tty_kick_worker(tty);
 		tty_wakeup(tty->link);
 		return;
@@ -292,8 +279,6 @@ static void n_tty_check_unthrottle(struct tty_struct *tty)
 		tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE);
 		if (chars_in_buffer(tty) > TTY_THRESHOLD_UNTHROTTLE)
 			break;
-		if (!tty->count)
-			break;
 		n_tty_kick_worker(tty);
 		unthrottled = tty_unthrottle_safe(tty);
 		if (!unthrottled)
@@ -380,28 +365,6 @@ static void n_tty_flush_buffer(struct tty_struct *tty)
 	up_write(&tty->termios_rwsem);
 }
 
-/**
- *	n_tty_chars_in_buffer	-	report available bytes
- *	@tty: tty device
- *
- *	Report the number of characters buffered to be delivered to user
- *	at this instant in time.
- *
- *	Locking: exclusive termios_rwsem
- */
-
-static ssize_t n_tty_chars_in_buffer(struct tty_struct *tty)
-{
-	ssize_t n;
-
-	WARN_ONCE(1, "%s is deprecated and scheduled for removal.", __func__);
-
-	down_write(&tty->termios_rwsem);
-	n = chars_in_buffer(tty);
-	up_write(&tty->termios_rwsem);
-	return n;
-}
-
 /**
  *	is_utf8_continuation	-	utf8 multibyte check
  *	@c: byte to check
@@ -1561,8 +1524,6 @@ n_tty_receive_buf_closing(struct tty_struct *tty, const unsigned char *cp,
 			flag = *fp++;
 		if (likely(flag == TTY_NORMAL))
 			n_tty_receive_char_closing(tty, *cp++);
-		else
-			n_tty_receive_char_flagged(tty, *cp++, flag);
 	}
 }
 
@@ -1664,7 +1625,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	/* publish read_head to consumer */
 	smp_store_release(&ldata->commit_head, ldata->read_head);
 
-	if ((read_cnt(ldata) >= ldata->minimum_to_wake) || L_EXTPROC(tty)) {
+	if (read_cnt(ldata)) {
 		kill_fasync(&tty->fasync, SIGIO, POLL_IN);
 		wake_up_interruptible_poll(&tty->read_wait, POLLIN);
 	}
@@ -1785,12 +1746,6 @@ static int n_tty_receive_buf2(struct tty_struct *tty, const unsigned char *cp,
 	return n_tty_receive_buf_common(tty, cp, fp, count, 1);
 }
 
-int is_ignored(int sig)
-{
-	return (sigismember(&current->blocked, sig) ||
-		current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
-}
-
 /**
  *	n_tty_set_termios	-	termios data changed
  *	@tty: terminal
@@ -1937,7 +1892,6 @@ static int n_tty_open(struct tty_struct *tty)
 	reset_buffer_flags(tty->disc_data);
 	ldata->column = 0;
 	ldata->canon_column = 0;
-	ldata->minimum_to_wake = 1;
 	ldata->num_overrun = 0;
 	ldata->no_room = 0;
 	ldata->lnext = 0;
@@ -2015,7 +1969,7 @@ static int copy_from_read_buf(struct tty_struct *tty,
 		retval = copy_to_user(*b, from, n);
 		n -= retval;
 		is_eof = n == 1 && *from == EOF_CHAR(tty);
-		tty_audit_add_data(tty, from, n, ldata->icanon);
+		tty_audit_add_data(tty, from, n);
 		smp_store_release(&ldata->read_tail, ldata->read_tail + n);
 		/* Turn single EOF into zero-length read */
 		if (L_EXTPROC(tty) && ldata->icanon && is_eof &&
@@ -2109,7 +2063,7 @@ static int canon_copy_from_read_buf(struct tty_struct *tty,
 			ldata->line_start = ldata->read_tail;
 		else
 			ldata->push = 0;
-		tty_audit_push(tty);
+		tty_audit_push();
 	}
 	return 0;
 }
@@ -2200,14 +2154,9 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 		minimum = MIN_CHAR(tty);
 		if (minimum) {
 			time = (HZ / 10) * TIME_CHAR(tty);
-			if (time)
-				ldata->minimum_to_wake = 1;
-			else if (!waitqueue_active(&tty->read_wait) ||
-				 (ldata->minimum_to_wake > minimum))
-				ldata->minimum_to_wake = minimum;
 		} else {
 			timeout = (HZ / 10) * TIME_CHAR(tty);
-			ldata->minimum_to_wake = minimum = 1;
+			minimum = 1;
 		}
 	}
 
@@ -2225,19 +2174,15 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 			cs = tty->link->ctrl_status;
 			tty->link->ctrl_status = 0;
 			spin_unlock_irq(&tty->link->ctrl_lock);
-			if (tty_put_user(tty, cs, b++)) {
+			if (put_user(cs, b)) {
 				retval = -EFAULT;
-				b--;
 				break;
 			}
+			b++;
 			nr--;
 			break;
 		}
 
-		if (((minimum - (b - buf)) < ldata->minimum_to_wake) &&
-		    ((minimum - (b - buf)) >= 1))
-			ldata->minimum_to_wake = (minimum - (b - buf));
-
 		done = check_other_done(tty);
 
 		if (!input_available_p(tty, 0)) {
@@ -2275,11 +2220,11 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 
 			/* Deal with packet mode. */
 			if (packet && b == buf) {
-				if (tty_put_user(tty, TIOCPKT_DATA, b++)) {
+				if (put_user(TIOCPKT_DATA, b)) {
 					retval = -EFAULT;
-					b--;
 					break;
 				}
+				b++;
 				nr--;
 			}
 
@@ -2303,9 +2248,6 @@ static ssize_t n_tty_read(struct tty_struct *tty, struct file *file,
 	up_read(&tty->termios_rwsem);
 
 	remove_wait_queue(&tty->read_wait, &wait);
-	if (!waitqueue_active(&tty->read_wait))
-		ldata->minimum_to_wake = minimum;
-
 	mutex_unlock(&ldata->atomic_read_lock);
 
 	if (b - buf)
@@ -2417,7 +2359,7 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
 	}
 break_out:
 	remove_wait_queue(&tty->write_wait, &wait);
-	if (b - buf != nr && tty->fasync)
+	if (nr && tty->fasync)
 		set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 	up_read(&tty->termios_rwsem);
 	return (b - buf) ? b - buf : retval;
@@ -2440,7 +2382,6 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file,
 static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 							poll_table *wait)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	unsigned int mask = 0;
 
 	poll_wait(file, &tty->read_wait, wait);
@@ -2453,12 +2394,6 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file,
 		mask |= POLLPRI | POLLIN | POLLRDNORM;
 	if (tty_hung_up_p(file))
 		mask |= POLLHUP;
-	if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
-		if (MIN_CHAR(tty) && !TIME_CHAR(tty))
-			ldata->minimum_to_wake = MIN_CHAR(tty);
-		else
-			ldata->minimum_to_wake = 1;
-	}
 	if (tty->ops->write && !tty_is_writelocked(tty) &&
 			tty_chars_in_buffer(tty) < WAKEUP_CHARS &&
 			tty_write_room(tty) > 0)
@@ -2507,25 +2442,12 @@ static int n_tty_ioctl(struct tty_struct *tty, struct file *file,
 	}
 }
 
-static void n_tty_fasync(struct tty_struct *tty, int on)
-{
-	struct n_tty_data *ldata = tty->disc_data;
-
-	if (!waitqueue_active(&tty->read_wait)) {
-		if (on)
-			ldata->minimum_to_wake = 1;
-		else if (!tty->fasync)
-			ldata->minimum_to_wake = N_TTY_BUF_SIZE;
-	}
-}
-
-struct tty_ldisc_ops tty_ldisc_N_TTY = {
+static struct tty_ldisc_ops n_tty_ops = {
 	.magic           = TTY_LDISC_MAGIC,
 	.name            = "n_tty",
 	.open            = n_tty_open,
 	.close           = n_tty_close,
 	.flush_buffer    = n_tty_flush_buffer,
-	.chars_in_buffer = n_tty_chars_in_buffer,
 	.read            = n_tty_read,
 	.write           = n_tty_write,
 	.ioctl           = n_tty_ioctl,
@@ -2533,7 +2455,6 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
 	.poll            = n_tty_poll,
 	.receive_buf     = n_tty_receive_buf,
 	.write_wakeup    = n_tty_write_wakeup,
-	.fasync		 = n_tty_fasync,
 	.receive_buf2	 = n_tty_receive_buf2,
 };
 
@@ -2541,14 +2462,18 @@ struct tty_ldisc_ops tty_ldisc_N_TTY = {
  *	n_tty_inherit_ops	-	inherit N_TTY methods
  *	@ops: struct tty_ldisc_ops where to save N_TTY methods
  *
- *	Enables a 'subclass' line discipline to 'inherit' N_TTY
- *	methods.
+ *	Enables a 'subclass' line discipline to 'inherit' N_TTY methods.
  */
 
 void n_tty_inherit_ops(struct tty_ldisc_ops *ops)
 {
-	*ops = tty_ldisc_N_TTY;
+	*ops = n_tty_ops;
 	ops->owner = NULL;
 	ops->refcount = ops->flags = 0;
 }
 EXPORT_SYMBOL_GPL(n_tty_inherit_ops);
+
+void __init n_tty_init(void)
+{
+	tty_register_ldisc(N_TTY, &n_tty_ops);
+}

drivers/tty/nozomi.c

@@ -823,7 +823,7 @@ static int receive_data(enum port_type index, struct nozomi *dc)
 	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	int i, ret;
 
-	read_mem32((u32 *) &size, addr, 4);
+	size = __le32_to_cpu(readl(addr));
 	/*  DBG1( "%d bytes port: %d", size, index); */
 
 	if (tty && test_bit(TTY_THROTTLED, &tty->flags)) {

drivers/tty/pty.c

@@ -263,8 +263,7 @@ static void pty_set_termios(struct tty_struct *tty,
 {
 	/* See if packet mode change of state. */
 	if (tty->link && tty->link->packet) {
-		int extproc = (old_termios->c_lflag & EXTPROC) |
-				(tty->termios.c_lflag & EXTPROC);
+		int extproc = (old_termios->c_lflag & EXTPROC) | L_EXTPROC(tty);
 		int old_flow = ((old_termios->c_iflag & IXON) &&
 				(old_termios->c_cc[VSTOP] == '\023') &&
 				(old_termios->c_cc[VSTART] == '\021'));
@@ -406,13 +405,8 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
 	if (legacy) {
 		/* We always use new tty termios data so we can do this
 		   the easy way .. */
-		retval = tty_init_termios(tty);
-		if (retval)
-			goto err_deinit_tty;
-
-		retval = tty_init_termios(o_tty);
-		if (retval)
-			goto err_free_termios;
+		tty_init_termios(tty);
+		tty_init_termios(o_tty);
 
 		driver->other->ttys[idx] = o_tty;
 		driver->ttys[idx] = tty;
@@ -444,12 +438,7 @@ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
 	tty->count++;
 	o_tty->count++;
 	return 0;
-err_free_termios:
-	if (legacy)
-		tty_free_termios(tty);
-err_deinit_tty:
-	deinitialize_tty_struct(o_tty);
-	free_tty_struct(o_tty);
+
 err_put_module:
 	module_put(driver->other->owner);
 err:
@@ -666,20 +655,13 @@ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
 	return tty;
 }
 
-/* We have no need to install and remove our tty objects as devpts does all
-   the work for us */
-
 static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	return pty_common_install(driver, tty, false);
 }
 
-static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
-{
-}
-
 /* this is called once with whichever end is closed last */
-static void pty_unix98_shutdown(struct tty_struct *tty)
+static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
 {
 	struct inode *ptmx_inode;
 
@@ -704,7 +686,6 @@ static const struct tty_operations ptm_unix98_ops = {
 	.unthrottle = pty_unthrottle,
 	.ioctl = pty_unix98_ioctl,
 	.resize = pty_resize,
-	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup
 };
 
@@ -722,7 +703,6 @@ static const struct tty_operations pty_unix98_ops = {
 	.set_termios = pty_set_termios,
 	.start = pty_start,
 	.stop = pty_stop,
-	.shutdown = pty_unix98_shutdown,
 	.cleanup = pty_cleanup,
 };
 

drivers/tty/rocket.c

@@ -643,7 +643,6 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
 	info->chan = chan;
 	tty_port_init(&info->port);
 	info->port.ops = &rocket_port_ops;
-	init_completion(&info->close_wait);
 	info->flags &= ~ROCKET_MODE_MASK;
 	switch (pc104[board][line]) {
 	case 422:
@@ -960,7 +959,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
 			tty->alt_speed = 460800;
 
 		configure_r_port(tty, info, NULL);
-		if (tty->termios.c_cflag & CBAUD) {
+		if (C_BAUD(tty)) {
 			sSetDTR(cp);
 			sSetRTS(cp);
 		}
@@ -1043,13 +1042,12 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
 		}
 	}
 	spin_lock_irq(&port->lock);
-	info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_CLOSING | ASYNC_NORMAL_ACTIVE);
+	info->port.flags &= ~(ASYNC_INITIALIZED | ASYNC_NORMAL_ACTIVE);
 	tty->closing = 0;
 	spin_unlock_irq(&port->lock);
 	mutex_unlock(&port->mutex);
 	tty_port_tty_set(port, NULL);
 
-	complete_all(&info->close_wait);
 	atomic_dec(&rp_num_ports_open);
 
 #ifdef ROCKET_DEBUG_OPEN
@@ -1086,18 +1084,18 @@ static void rp_set_termios(struct tty_struct *tty,
 	cp = &info->channel;
 
 	/* Handle transition to B0 status */
-	if ((old_termios->c_cflag & CBAUD) && !(tty->termios.c_cflag & CBAUD)) {
+	if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
 		sClrDTR(cp);
 		sClrRTS(cp);
 	}
 
 	/* Handle transition away from B0 status */
-	if (!(old_termios->c_cflag & CBAUD) && (tty->termios.c_cflag & CBAUD)) {
+	if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
 		sSetRTS(cp);
 		sSetDTR(cp);
 	}
 
-	if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios.c_cflag & CRTSCTS))
+	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty))
 		rp_start(tty);
 }
 
@@ -1360,8 +1358,7 @@ static void rp_throttle(struct tty_struct *tty)
 	struct r_port *info = tty->driver_data;
 
 #ifdef ROCKET_DEBUG_THROTTLE
-	printk(KERN_INFO "throttle %s: %d....\n", tty->name,
-	       tty->ldisc.chars_in_buffer(tty));
+	printk(KERN_INFO "throttle %s ....\n", tty->name);
 #endif
 
 	if (rocket_paranoia_check(info, "rp_throttle"))
@@ -1377,8 +1374,7 @@ static void rp_unthrottle(struct tty_struct *tty)
 {
 	struct r_port *info = tty->driver_data;
 #ifdef ROCKET_DEBUG_THROTTLE
-	printk(KERN_INFO "unthrottle %s: %d....\n", tty->name,
-	       tty->ldisc.chars_in_buffer(tty));
+	printk(KERN_INFO "unthrottle %s ....\n", tty->name);
 #endif
 
 	if (rocket_paranoia_check(info, "rp_unthrottle"))

drivers/tty/rocket_int.h

@@ -1144,7 +1144,6 @@ struct r_port {
 	int read_status_mask;
 	int cps;
 
-	struct completion close_wait;	/* Not yet matching the core */
 	spinlock_t slock;
 	struct mutex write_mtx;
 };

drivers/tty/serial/8250/8250.h

@@ -92,6 +92,18 @@ struct serial8250_config {
 #define SERIAL8250_SHARE_IRQS 0
 #endif
 
+#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
+	{							\
+		.iobase		= _base,			\
+		.irq		= _irq,				\
+		.uartclk	= 1843200,			\
+		.iotype		= UPIO_PORT,			\
+		.flags		= UPF_BOOT_AUTOCONF | (_flags),	\
+	}
+
+#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
+
+
 static inline int serial_in(struct uart_8250_port *up, int offset)
 {
 	return up->port.serial_in(&up->port, offset);
@@ -117,6 +129,8 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
 struct uart_8250_port *serial8250_get_port(int line);
 void serial8250_rpm_get(struct uart_8250_port *p);
 void serial8250_rpm_put(struct uart_8250_port *p);
+int serial8250_em485_init(struct uart_8250_port *p);
+void serial8250_em485_destroy(struct uart_8250_port *p);
 
 #if defined(__alpha__) && !defined(CONFIG_PCI)
 /*

drivers/tty/serial/8250/8250_accent.c

@@ -10,18 +10,11 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port accent_data[] = {
-	PORT(0x330, 4),
-	PORT(0x338, 4),
+	SERIAL8250_PORT(0x330, 4),
+	SERIAL8250_PORT(0x338, 4),
 	{ },
 };
 

drivers/tty/serial/8250/8250_acorn.c

@@ -70,7 +70,7 @@ serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
 	uart.port.regshift	= 2;
 	uart.port.dev	= &ec->dev;
 
-	for (i = 0; i < info->num_ports; i ++) {
+	for (i = 0; i < info->num_ports; i++) {
 		uart.port.membase = info->vaddr + type->offset[i];
 		uart.port.mapbase = bus_addr + type->offset[i];
 

drivers/tty/serial/8250/8250_bcm2835aux.c

+/*
+ * Serial port driver for BCM2835AUX UART
+ *
+ * Copyright (C) 2016 Martin Sperl <kernel@martin.sperl.org>
+ *
+ * Based on 8250_lpc18xx.c:
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+struct bcm2835aux_data {
+	struct uart_8250_port uart;
+	struct clk *clk;
+	int line;
+};
+
+static int bcm2835aux_serial_probe(struct platform_device *pdev)
+{
+	struct bcm2835aux_data *data;
+	struct resource *res;
+	int ret;
+
+	/* allocate the custom structure */
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* initialize data */
+	spin_lock_init(&data->uart.port.lock);
+	data->uart.capabilities = UART_CAP_FIFO;
+	data->uart.port.dev = &pdev->dev;
+	data->uart.port.regshift = 2;
+	data->uart.port.type = PORT_16550;
+	data->uart.port.iotype = UPIO_MEM;
+	data->uart.port.fifosize = 8;
+	data->uart.port.flags = UPF_SHARE_IRQ |
+				UPF_FIXED_PORT |
+				UPF_FIXED_TYPE |
+				UPF_SKIP_TEST;
+
+	/* get the clock - this also enables the HW */
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	ret = PTR_ERR_OR_ZERO(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not get clk: %d\n", ret);
+		return ret;
+	}
+
+	/* get the interrupt */
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "irq not found - %i", ret);
+		return ret;
+	}
+	data->uart.port.irq = ret;
+
+	/* map the main registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "memory resource not found");
+		return -EINVAL;
+	}
+	data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res);
+	ret = PTR_ERR_OR_ZERO(data->uart.port.membase);
+	if (ret)
+		return ret;
+
+	/* Check for a fixed line number */
+	ret = of_alias_get_id(pdev->dev.of_node, "serial");
+	if (ret >= 0)
+		data->uart.port.line = ret;
+
+	/* enable the clock as a last step */
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable uart clock - %d\n",
+			ret);
+		return ret;
+	}
+
+	/* the HW-clock divider for bcm2835aux is 8,
+	 * but 8250 expects a divider of 16,
+	 * so we have to multiply the actual clock by 2
+	 * to get identical baudrates.
+	 */
+	data->uart.port.uartclk = clk_get_rate(data->clk) * 2;
+
+	/* register the port */
+	ret = serial8250_register_8250_port(&data->uart);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register 8250 port - %d\n",
+			ret);
+		goto dis_clk;
+	}
+	data->line = ret;
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+
+dis_clk:
+	clk_disable_unprepare(data->clk);
+	return ret;
+}
+
+static int bcm2835aux_serial_remove(struct platform_device *pdev)
+{
+	struct bcm2835aux_data *data = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(data->uart.port.line);
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835aux_serial_match[] = {
+	{ .compatible = "brcm,bcm2835-aux-uart" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match);
+
+static struct platform_driver bcm2835aux_serial_driver = {
+	.driver = {
+		.name = "bcm2835-aux-uart",
+		.of_match_table = bcm2835aux_serial_match,
+	},
+	.probe  = bcm2835aux_serial_probe,
+	.remove = bcm2835aux_serial_remove,
+};
+module_platform_driver(bcm2835aux_serial_driver);
+
+MODULE_DESCRIPTION("BCM2835 auxiliar UART driver");
+MODULE_AUTHOR("Martin Sperl <kernel@martin.sperl.org>");
+MODULE_LICENSE("GPL v2");

drivers/tty/serial/8250/8250_boca.c

@@ -10,32 +10,25 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port boca_data[] = {
-	PORT(0x100, 12),
-	PORT(0x108, 12),
-	PORT(0x110, 12),
-	PORT(0x118, 12),
-	PORT(0x120, 12),
-	PORT(0x128, 12),
-	PORT(0x130, 12),
-	PORT(0x138, 12),
-	PORT(0x140, 12),
-	PORT(0x148, 12),
-	PORT(0x150, 12),
-	PORT(0x158, 12),
-	PORT(0x160, 12),
-	PORT(0x168, 12),
-	PORT(0x170, 12),
-	PORT(0x178, 12),
+	SERIAL8250_PORT(0x100, 12),
+	SERIAL8250_PORT(0x108, 12),
+	SERIAL8250_PORT(0x110, 12),
+	SERIAL8250_PORT(0x118, 12),
+	SERIAL8250_PORT(0x120, 12),
+	SERIAL8250_PORT(0x128, 12),
+	SERIAL8250_PORT(0x130, 12),
+	SERIAL8250_PORT(0x138, 12),
+	SERIAL8250_PORT(0x140, 12),
+	SERIAL8250_PORT(0x148, 12),
+	SERIAL8250_PORT(0x150, 12),
+	SERIAL8250_PORT(0x158, 12),
+	SERIAL8250_PORT(0x160, 12),
+	SERIAL8250_PORT(0x168, 12),
+	SERIAL8250_PORT(0x170, 12),
+	SERIAL8250_PORT(0x178, 12),
 	{ },
 };
 

drivers/tty/serial/8250/8250_core.c

@@ -597,6 +597,7 @@ static void univ8250_console_write(struct console *co, const char *s,
 static int univ8250_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
+	int retval;
 
 	/*
 	 * Check whether an invalid uart number has been specified, and
@@ -609,7 +610,10 @@ static int univ8250_console_setup(struct console *co, char *options)
 	/* link port to console */
 	port->cons = co;
 
-	return serial8250_console_setup(port, options, false);
+	retval = serial8250_console_setup(port, options, false);
+	if (retval != 0)
+		port->cons = NULL;
+	return retval;
 }
 
 /**
@@ -687,7 +691,7 @@ static int __init univ8250_console_init(void)
 }
 console_initcall(univ8250_console_init);
 
-#define SERIAL8250_CONSOLE	&univ8250_console
+#define SERIAL8250_CONSOLE	(&univ8250_console)
 #else
 #define SERIAL8250_CONSOLE	NULL
 #endif
@@ -764,6 +768,7 @@ void serial8250_suspend_port(int line)
 
 	uart_suspend_port(&serial8250_reg, port);
 }
+EXPORT_SYMBOL(serial8250_suspend_port);
 
 /**
  *	serial8250_resume_port - resume one serial port
@@ -789,6 +794,7 @@ void serial8250_resume_port(int line)
 	}
 	uart_resume_port(&serial8250_reg, port);
 }
+EXPORT_SYMBOL(serial8250_resume_port);
 
 /*
  * Register a set of serial devices attached to a platform device.  The
@@ -1068,6 +1074,15 @@ void serial8250_unregister_port(int line)
 	struct uart_8250_port *uart = &serial8250_ports[line];
 
 	mutex_lock(&serial_mutex);
+
+	if (uart->em485) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&uart->port.lock, flags);
+		serial8250_em485_destroy(uart);
+		spin_unlock_irqrestore(&uart->port.lock, flags);
+	}
+
 	uart_remove_one_port(&serial8250_reg, &uart->port);
 	if (serial8250_isa_devs) {
 		uart->port.flags &= ~UPF_BOOT_AUTOCONF;
@@ -1093,9 +1108,8 @@ static int __init serial8250_init(void)
 
 	serial8250_isa_init_ports();
 
-	printk(KERN_INFO "Serial: 8250/16550 driver, "
-		"%d ports, IRQ sharing %sabled\n", nr_uarts,
-		share_irqs ? "en" : "dis");
+	pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n",
+		nr_uarts, share_irqs ? "en" : "dis");
 
 #ifdef CONFIG_SPARC
 	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
@@ -1168,15 +1182,11 @@ static void __exit serial8250_exit(void)
 module_init(serial8250_init);
 module_exit(serial8250_exit);
 
-EXPORT_SYMBOL(serial8250_suspend_port);
-EXPORT_SYMBOL(serial8250_resume_port);
-
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");
 
 module_param(share_irqs, uint, 0644);
-MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
-	" (unsafe)");
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");
 
 module_param(nr_uarts, uint, 0644);
 MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");

drivers/tty/serial/8250/8250_dw.c

@@ -68,12 +68,6 @@ struct dw8250_data {
 	unsigned int		uart_16550_compatible:1;
 };
 
-#define BYT_PRV_CLK			0x800
-#define BYT_PRV_CLK_EN			(1 << 0)
-#define BYT_PRV_CLK_M_VAL_SHIFT		1
-#define BYT_PRV_CLK_N_VAL_SHIFT		16
-#define BYT_PRV_CLK_UPDATE		(1 << 31)
-
 static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
 {
 	struct dw8250_data *d = p->private_data;
@@ -95,25 +89,45 @@ static void dw8250_force_idle(struct uart_port *p)
 	(void)p->serial_in(p, UART_RX);
 }
 
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_check_lcr(struct uart_port *p, int value)
 {
-	writeb(value, p->membase + (offset << p->regshift));
+	void __iomem *offset = p->membase + (UART_LCR << p->regshift);
+	int tries = 1000;
 
 	/* Make sure LCR write wasn't ignored */
-	if (offset == UART_LCR) {
-		int tries = 1000;
-		while (tries--) {
-			unsigned int lcr = p->serial_in(p, UART_LCR);
-			if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-				return;
-			dw8250_force_idle(p);
-			writeb(value, p->membase + (UART_LCR << p->regshift));
-		}
-		/*
-		 * FIXME: this deadlocks if port->lock is already held
-		 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-		 */
+	while (tries--) {
+		unsigned int lcr = p->serial_in(p, UART_LCR);
+
+		if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+			return;
+
+		dw8250_force_idle(p);
+
+#ifdef CONFIG_64BIT
+		__raw_writeq(value & 0xff, offset);
+#else
+		if (p->iotype == UPIO_MEM32)
+			writel(value, offset);
+		else if (p->iotype == UPIO_MEM32BE)
+			iowrite32be(value, offset);
+		else
+			writeb(value, offset);
+#endif
 	}
+	/*
+	 * FIXME: this deadlocks if port->lock is already held
+	 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+	 */
+}
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+	struct dw8250_data *d = p->private_data;
+
+	writeb(value, p->membase + (offset << p->regshift));
+
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
 }
 
 static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -135,49 +149,26 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
 
 static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
 {
+	struct dw8250_data *d = p->private_data;
+
 	value &= 0xff;
 	__raw_writeq(value, p->membase + (offset << p->regshift));
 	/* Read back to ensure register write ordering. */
 	__raw_readq(p->membase + (UART_LCR << p->regshift));
 
-	/* Make sure LCR write wasn't ignored */
-	if (offset == UART_LCR) {
-		int tries = 1000;
-		while (tries--) {
-			unsigned int lcr = p->serial_in(p, UART_LCR);
-			if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-				return;
-			dw8250_force_idle(p);
-			__raw_writeq(value & 0xff,
-				     p->membase + (UART_LCR << p->regshift));
-		}
-		/*
-		 * FIXME: this deadlocks if port->lock is already held
-		 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-		 */
-	}
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
 }
 #endif /* CONFIG_64BIT */
 
 static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
 {
+	struct dw8250_data *d = p->private_data;
+
 	writel(value, p->membase + (offset << p->regshift));
 
-	/* Make sure LCR write wasn't ignored */
-	if (offset == UART_LCR) {
-		int tries = 1000;
-		while (tries--) {
-			unsigned int lcr = p->serial_in(p, UART_LCR);
-			if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-				return;
-			dw8250_force_idle(p);
-			writel(value, p->membase + (UART_LCR << p->regshift));
-		}
-		/*
-		 * FIXME: this deadlocks if port->lock is already held
-		 * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-		 */
-	}
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
 }
 
 static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -187,14 +178,33 @@ static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
 	return dw8250_modify_msr(p, offset, value);
 }
 
+static void dw8250_serial_out32be(struct uart_port *p, int offset, int value)
+{
+	struct dw8250_data *d = p->private_data;
+
+	iowrite32be(value, p->membase + (offset << p->regshift));
+
+	if (offset == UART_LCR && !d->uart_16550_compatible)
+		dw8250_check_lcr(p, value);
+}
+
+static unsigned int dw8250_serial_in32be(struct uart_port *p, int offset)
+{
+       unsigned int value = ioread32be(p->membase + (offset << p->regshift));
+
+       return dw8250_modify_msr(p, offset, value);
+}
+
+
 static int dw8250_handle_irq(struct uart_port *p)
 {
 	struct dw8250_data *d = p->private_data;
 	unsigned int iir = p->serial_in(p, UART_IIR);
 
-	if (serial8250_handle_irq(p, iir)) {
+	if (serial8250_handle_irq(p, iir))
 		return 1;
-	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
+
+	if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 		/* Clear the USR */
 		(void)p->serial_in(p, d->usr_reg);
 
@@ -281,6 +291,11 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 			data->skip_autocfg = true;
 		}
 #endif
+		if (of_device_is_big_endian(p->dev->of_node)) {
+			p->iotype = UPIO_MEM32BE;
+			p->serial_in = dw8250_serial_in32be;
+			p->serial_out = dw8250_serial_out32be;
+		}
 	} else if (has_acpi_companion(p->dev)) {
 		p->iotype = UPIO_MEM32;
 		p->regshift = 2;
@@ -309,14 +324,20 @@ static void dw8250_setup_port(struct uart_port *p)
 	 * If the Component Version Register returns zero, we know that
 	 * ADDITIONAL_FEATURES are not enabled. No need to go any further.
 	 */
-	reg = readl(p->membase + DW_UART_UCV);
+	if (p->iotype == UPIO_MEM32BE)
+		reg = ioread32be(p->membase + DW_UART_UCV);
+	else
+		reg = readl(p->membase + DW_UART_UCV);
 	if (!reg)
 		return;
 
 	dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
 		(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
 
-	reg = readl(p->membase + DW_UART_CPR);
+	if (p->iotype == UPIO_MEM32BE)
+		reg = ioread32be(p->membase + DW_UART_CPR);
+	else
+		reg = readl(p->membase + DW_UART_CPR);
 	if (!reg)
 		return;
 
@@ -463,10 +484,8 @@ static int dw8250_probe(struct platform_device *pdev)
 	dw8250_quirks(p, data);
 
 	/* If the Busy Functionality is not implemented, don't handle it */
-	if (data->uart_16550_compatible) {
-		p->serial_out = NULL;
+	if (data->uart_16550_compatible)
 		p->handle_irq = NULL;
-	}
 
 	if (!data->skip_autocfg)
 		dw8250_setup_port(p);

drivers/tty/serial/8250/8250_early.c

@@ -39,15 +39,17 @@
 
 static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		return readb(port->membase + offset);
 	case UPIO_MEM16:
-		return readw(port->membase + (offset << 1));
+		return readw(port->membase + offset);
 	case UPIO_MEM32:
-		return readl(port->membase + (offset << 2));
+		return readl(port->membase + offset);
 	case UPIO_MEM32BE:
-		return ioread32be(port->membase + (offset << 2));
+		return ioread32be(port->membase + offset);
 	case UPIO_PORT:
 		return inb(port->iobase + offset);
 	default:
@@ -57,18 +59,20 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
 
 static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
 {
+	offset <<= port->regshift;
+
 	switch (port->iotype) {
 	case UPIO_MEM:
 		writeb(value, port->membase + offset);
 		break;
 	case UPIO_MEM16:
-		writew(value, port->membase + (offset << 1));
+		writew(value, port->membase + offset);
 		break;
 	case UPIO_MEM32:
-		writel(value, port->membase + (offset << 2));
+		writel(value, port->membase + offset);
 		break;
 	case UPIO_MEM32BE:
-		iowrite32be(value, port->membase + (offset << 2));
+		iowrite32be(value, port->membase + offset);
 		break;
 	case UPIO_PORT:
 		outb(value, port->iobase + offset);
@@ -145,3 +149,25 @@ EARLYCON_DECLARE(uart8250, early_serial8250_setup);
 EARLYCON_DECLARE(uart, early_serial8250_setup);
 OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
 OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
+OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
+
+#ifdef CONFIG_SERIAL_8250_OMAP
+
+static int __init early_omap8250_setup(struct earlycon_device *device,
+				       const char *options)
+{
+	struct uart_port *port = &device->port;
+
+	if (!(device->port.membase || device->port.iobase))
+		return -ENODEV;
+
+	port->regshift = 2;
+	device->con->write = early_serial8250_write;
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
+OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
+
+#endif

drivers/tty/serial/8250/8250_exar_st16c554.c

@@ -13,20 +13,13 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port exar_data[] = {
-	PORT(0x100, 5),
-	PORT(0x108, 5),
-	PORT(0x110, 5),
-	PORT(0x118, 5),
+	SERIAL8250_PORT(0x100, 5),
+	SERIAL8250_PORT(0x108, 5),
+	SERIAL8250_PORT(0x110, 5),
+	SERIAL8250_PORT(0x118, 5),
 	{ },
 };
 

drivers/tty/serial/8250/8250_fourport.c

@@ -10,24 +10,20 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)						\
-	{								\
-		.iobase		= _base,				\
-		.irq		= _irq,					\
-		.uartclk	= 1843200,				\
-		.iotype		= UPIO_PORT,				\
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FOURPORT,	\
-	}
+#include "8250.h"
+
+#define SERIAL8250_FOURPORT(_base, _irq) \
+	SERIAL8250_PORT_FLAGS(_base, _irq, UPF_FOURPORT)
 
 static struct plat_serial8250_port fourport_data[] = {
-	PORT(0x1a0, 9),
-	PORT(0x1a8, 9),
-	PORT(0x1b0, 9),
-	PORT(0x1b8, 9),
-	PORT(0x2a0, 5),
-	PORT(0x2a8, 5),
-	PORT(0x2b0, 5),
-	PORT(0x2b8, 5),
+	SERIAL8250_FOURPORT(0x1a0, 9),
+	SERIAL8250_FOURPORT(0x1a8, 9),
+	SERIAL8250_FOURPORT(0x1b0, 9),
+	SERIAL8250_FOURPORT(0x1b8, 9),
+	SERIAL8250_FOURPORT(0x2a0, 5),
+	SERIAL8250_FOURPORT(0x2a8, 5),
+	SERIAL8250_FOURPORT(0x2b0, 5),
+	SERIAL8250_FOURPORT(0x2b8, 5),
 	{ },
 };
 

drivers/tty/serial/8250/8250_gsc.c

@@ -42,7 +42,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
 		 * the user what they're missing.
 		 */
 		if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
-			printk(KERN_INFO
+			dev_info(&dev->dev,
 				"Serial: device 0x%llx not configured.\n"
 				"Enable support for Wax, Lasi, Asp or Dino.\n",
 				(unsigned long long)dev->hpa.start);
@@ -66,8 +66,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
 
 	err = serial8250_register_8250_port(&uart);
 	if (err < 0) {
-		printk(KERN_WARNING
-			"serial8250_register_8250_port returned error %d\n", err);
+		dev_warn(&dev->dev,
+			"serial8250_register_8250_port returned error %d\n",
+			err);
 		iounmap(uart.port.membase);
 		return err;
 	}

drivers/tty/serial/8250/8250_hp300.c

@@ -24,8 +24,7 @@
 #endif
 
 #ifdef CONFIG_HPAPCI
-struct hp300_port
-{
+struct hp300_port {
 	struct hp300_port *next;	/* next port */
 	int line;			/* line (tty) number */
 };
@@ -111,7 +110,7 @@ int __init hp300_setup_serial_console(void)
 	/* Check for APCI console */
 	if (scode == 256) {
 #ifdef CONFIG_HPAPCI
-		printk(KERN_INFO "Serial console is HP APCI 1\n");
+		pr_info("Serial console is HP APCI 1\n");
 
 		port.uartclk = HPAPCI_BAUD_BASE * 16;
 		port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
@@ -119,7 +118,7 @@ int __init hp300_setup_serial_console(void)
 		port.regshift = 2;
 		add_preferred_console("ttyS", port.line, "9600n8");
 #else
-		printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
+		pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
 		return 0;
 #endif
 	} else {
@@ -128,7 +127,7 @@ int __init hp300_setup_serial_console(void)
 		if (!pa)
 			return 0;
 
-		printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
+		pr_info("Serial console is HP DCA at select code %d\n", scode);
 
 		port.uartclk = HPDCA_BAUD_BASE * 16;
 		port.mapbase = (pa + UART_OFFSET);
@@ -142,13 +141,13 @@ int __init hp300_setup_serial_console(void)
 		if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
 			add_preferred_console("ttyS", port.line, "9600n8");
 #else
-		printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
+		pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
 		return 0;
 #endif
 	}
 
 	if (early_serial_setup(&port) < 0)
-		printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
+		pr_warn("%s: early_serial_setup() failed.\n", __func__);
 	return 0;
 }
 #endif /* CONFIG_SERIAL_8250_CONSOLE */
@@ -180,8 +179,9 @@ static int hpdca_init_one(struct dio_dev *d,
 	line = serial8250_register_8250_port(&uart);
 
 	if (line < 0) {
-		printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
-		       " irq %d failed\n", d->scode, uart.port.irq);
+		dev_notice(&d->dev,
+			  "8250_hp300: register_serial() DCA scode %d irq %d failed\n",
+			  d->scode, uart.port.irq);
 		return -ENOMEM;
 	}
 
@@ -249,8 +249,8 @@ static int __init hp300_8250_init(void)
 
 		/* Memory mapped I/O */
 		uart.port.iotype = UPIO_MEM;
-		uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
-			      | UPF_BOOT_AUTOCONF;
+		uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ
+				| UPF_BOOT_AUTOCONF;
 		/* XXX - no interrupt support yet */
 		uart.port.irq = 0;
 		uart.port.uartclk = HPAPCI_BAUD_BASE * 16;
@@ -261,8 +261,9 @@ static int __init hp300_8250_init(void)
 		line = serial8250_register_8250_port(&uart);
 
 		if (line < 0) {
-			printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
-			       " %d irq %d failed\n", i, uart.port.irq);
+			dev_notice(uart.port.dev,
+				   "8250_hp300: register_serial() APCI %d irq %d failed\n",
+				   i, uart.port.irq);
 			kfree(port);
 			continue;
 		}

drivers/tty/serial/8250/8250_hub6.c

@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define HUB6(card,port)							\
+#define HUB6(card, port)						\
 	{								\
 		.iobase		= 0x302,				\
 		.irq		= 3,					\

drivers/tty/serial/8250/8250_ingenic.c

@@ -48,7 +48,7 @@ static const struct of_device_id of_match[];
 #define UART_MCR_MDCE	BIT(7)
 #define UART_MCR_FCM	BIT(6)
 
-#ifdef CONFIG_SERIAL_EARLYCON
+#if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)
 static struct earlycon_device *early_device;
 
 static uint8_t __init early_in(struct uart_port *port, int offset)
@@ -154,14 +154,18 @@ static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
 		break;
 
 	case UART_IER:
-		/* Enable receive timeout interrupt with the
-		 * receive line status interrupt */
+		/*
+		 * Enable receive timeout interrupt with the receive line
+		 * status interrupt.
+		 */
 		value |= (value & 0x4) << 2;
 		break;
 
 	case UART_MCR:
-		/* If we have enabled modem status IRQs we should enable modem
-		 * mode. */
+		/*
+		 * If we have enabled modem status IRQs we should enable
+		 * modem mode.
+		 */
 		ier = p->serial_in(p, UART_IER);
 
 		if (ier & UART_IER_MSI)

drivers/tty/serial/8250/8250_moxa.c

+/*
+ * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
+ *
+ * Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "8250.h"
+
+#define	PCI_DEVICE_ID_MOXA_CP102E	0x1024
+#define	PCI_DEVICE_ID_MOXA_CP102EL	0x1025
+#define	PCI_DEVICE_ID_MOXA_CP104EL_A	0x1045
+#define	PCI_DEVICE_ID_MOXA_CP114EL	0x1144
+#define	PCI_DEVICE_ID_MOXA_CP116E_A_A	0x1160
+#define	PCI_DEVICE_ID_MOXA_CP116E_A_B	0x1161
+#define	PCI_DEVICE_ID_MOXA_CP118EL_A	0x1182
+#define	PCI_DEVICE_ID_MOXA_CP118E_A_I	0x1183
+#define	PCI_DEVICE_ID_MOXA_CP132EL	0x1322
+#define	PCI_DEVICE_ID_MOXA_CP134EL_A	0x1342
+#define	PCI_DEVICE_ID_MOXA_CP138E_A	0x1381
+#define	PCI_DEVICE_ID_MOXA_CP168EL_A	0x1683
+
+#define MOXA_BASE_BAUD 921600
+#define MOXA_UART_OFFSET 0x200
+#define MOXA_BASE_BAR 1
+
+struct moxa8250_board {
+	unsigned int num_ports;
+	int line[0];
+};
+
+enum {
+	moxa8250_2p = 0,
+	moxa8250_4p,
+	moxa8250_8p
+};
+
+static struct moxa8250_board moxa8250_boards[] = {
+	[moxa8250_2p] = { .num_ports = 2},
+	[moxa8250_4p] = { .num_ports = 4},
+	[moxa8250_8p] = { .num_ports = 8},
+};
+
+static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct uart_8250_port uart;
+	struct moxa8250_board *brd;
+	void __iomem *ioaddr;
+	resource_size_t baseaddr;
+	unsigned int i, nr_ports;
+	unsigned int offset;
+	int ret;
+
+	brd = &moxa8250_boards[id->driver_data];
+	nr_ports = brd->num_ports;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) +
+			   sizeof(unsigned int) * nr_ports, GFP_KERNEL);
+	if (!brd)
+		return -ENOMEM;
+
+	memset(&uart, 0, sizeof(struct uart_8250_port));
+
+	uart.port.dev = &pdev->dev;
+	uart.port.irq = pdev->irq;
+	uart.port.uartclk = MOXA_BASE_BAUD * 16;
+	uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+
+	baseaddr = pci_resource_start(pdev, MOXA_BASE_BAR);
+	ioaddr = pcim_iomap(pdev, MOXA_BASE_BAR, 0);
+	if (!ioaddr)
+		return -ENOMEM;
+
+	for (i = 0; i < nr_ports; i++) {
+
+		/*
+		 * MOXA Smartio MUE boards with 4 ports have
+		 * a different offset for port #3
+		 */
+		if (nr_ports == 4 && i == 3)
+			offset = 7 * MOXA_UART_OFFSET;
+		else
+			offset = i * MOXA_UART_OFFSET;
+
+		uart.port.iotype = UPIO_MEM;
+		uart.port.iobase = 0;
+		uart.port.mapbase = baseaddr + offset;
+		uart.port.membase = ioaddr + offset;
+		uart.port.regshift = 0;
+
+		dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+			uart.port.iobase, uart.port.irq, uart.port.iotype);
+
+		brd->line[i] = serial8250_register_8250_port(&uart);
+		if (brd->line[i] < 0) {
+			dev_err(&pdev->dev,
+				"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+				uart.port.iobase, uart.port.irq,
+				uart.port.iotype, brd->line[i]);
+			break;
+		}
+	}
+
+	pci_set_drvdata(pdev, brd);
+	return 0;
+}
+
+static void moxa8250_remove(struct pci_dev *pdev)
+{
+	struct moxa8250_board *brd = pci_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < brd->num_ports; i++)
+		serial8250_unregister_port(brd->line[i]);
+}
+
+#define MOXA_DEVICE(id, data) { PCI_VDEVICE(MOXA, id), (kernel_ulong_t)data }
+
+static const struct pci_device_id pci_ids[] = {
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102E, moxa8250_2p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102EL, moxa8250_2p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP104EL_A, moxa8250_4p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP114EL, moxa8250_4p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_A, moxa8250_8p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_B, moxa8250_8p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118EL_A, moxa8250_8p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118E_A_I, moxa8250_8p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP132EL, moxa8250_2p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP134EL_A, moxa8250_4p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP138E_A, moxa8250_8p),
+	MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP168EL_A, moxa8250_8p),
+	{0}
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver moxa8250_pci_driver = {
+	.name           = "8250_moxa",
+	.id_table       = pci_ids,
+	.probe          = moxa8250_probe,
+	.remove         = moxa8250_remove,
+};
+
+module_pci_driver(moxa8250_pci_driver);
+
+MODULE_AUTHOR("Mathieu OTHACEHE");
+MODULE_DESCRIPTION("MOXA SmartIO MUE driver");
+MODULE_LICENSE("GPL v2");

drivers/tty/serial/8250/8250_mtk.c

@@ -16,7 +16,7 @@
  */
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
@@ -41,12 +41,10 @@ static void
 mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 			struct ktermios *old)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
 	unsigned int baud, quot;
 
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
-
 	serial8250_do_set_termios(port, termios, old);
 
 	/*
@@ -116,7 +114,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
 		tty_termios_encode_baud_rate(termios, baud, baud);
 }
 
-static int mtk8250_runtime_suspend(struct device *dev)
+static int __maybe_unused mtk8250_runtime_suspend(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 
@@ -126,7 +124,7 @@ static int mtk8250_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int mtk8250_runtime_resume(struct device *dev)
+static int __maybe_unused mtk8250_runtime_resume(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 	int err;
@@ -245,8 +243,24 @@ static int mtk8250_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int mtk8250_suspend(struct device *dev)
+static int mtk8250_remove(struct platform_device *pdev)
+{
+	struct mtk8250_data *data = platform_get_drvdata(pdev);
+
+	pm_runtime_get_sync(&pdev->dev);
+
+	serial8250_unregister_port(data->line);
+
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		mtk8250_runtime_suspend(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused mtk8250_suspend(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 
@@ -255,7 +269,7 @@ static int mtk8250_suspend(struct device *dev)
 	return 0;
 }
 
-static int mtk8250_resume(struct device *dev)
+static int __maybe_unused mtk8250_resume(struct device *dev)
 {
 	struct mtk8250_data *data = dev_get_drvdata(dev);
 
@@ -263,7 +277,6 @@ static int mtk8250_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops mtk8250_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
@@ -275,20 +288,20 @@ static const struct of_device_id mtk8250_of_match[] = {
 	{ .compatible = "mediatek,mt6577-uart" },
 	{ /* Sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, mtk8250_of_match);
 
 static struct platform_driver mtk8250_platform_driver = {
 	.driver = {
-		.name			= "mt6577-uart",
-		.pm			= &mtk8250_pm_ops,
-		.of_match_table		= mtk8250_of_match,
-		.suppress_bind_attrs	= true,
-
+		.name		= "mt6577-uart",
+		.pm		= &mtk8250_pm_ops,
+		.of_match_table	= mtk8250_of_match,
 	},
 	.probe			= mtk8250_probe,
+	.remove			= mtk8250_remove,
 };
-builtin_platform_driver(mtk8250_platform_driver);
+module_platform_driver(mtk8250_platform_driver);
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && !defined(MODULE)
 static int __init early_mtk8250_setup(struct earlycon_device *device,
 					const char *options)
 {
@@ -302,3 +315,7 @@ static int __init early_mtk8250_setup(struct earlycon_device *device,
 
 OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
 #endif
+
+MODULE_AUTHOR("Matthias Brugger");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Mediatek 8250 serial port driver");

drivers/tty/serial/8250/8250_of.c

@@ -335,6 +335,7 @@ static struct platform_driver of_platform_serial_driver = {
 	.driver = {
 		.name = "of_serial",
 		.of_match_table = of_platform_serial_table,
+		.pm = &of_serial_pm_ops,
 	},
 	.probe = of_platform_serial_probe,
 	.remove = of_platform_serial_remove,

drivers/tty/serial/8250/8250_omap.c

@@ -318,8 +318,7 @@ static void omap_8250_set_termios(struct uart_port *port,
 				  struct ktermios *termios,
 				  struct ktermios *old)
 {
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
+	struct uart_8250_port *up = up_to_u8250p(port);
 	struct omap8250_priv *priv = up->port.private_data;
 	unsigned char cval = 0;
 	unsigned int baud;
@@ -682,9 +681,8 @@ static void omap_8250_shutdown(struct uart_port *port)
 
 static void omap_8250_throttle(struct uart_port *port)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
 
 	pm_runtime_get_sync(port->dev);
 
@@ -697,11 +695,40 @@ static void omap_8250_throttle(struct uart_port *port)
 	pm_runtime_put_autosuspend(port->dev);
 }
 
+static int omap_8250_rs485_config(struct uart_port *port,
+				  struct serial_rs485 *rs485)
+{
+	struct uart_8250_port *up = up_to_u8250p(port);
+
+	/* Clamp the delays to [0, 100ms] */
+	rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+	rs485->delay_rts_after_send  = min(rs485->delay_rts_after_send, 100U);
+
+	port->rs485 = *rs485;
+
+	/*
+	 * Both serial8250_em485_init and serial8250_em485_destroy
+	 * are idempotent
+	 */
+	if (rs485->flags & SER_RS485_ENABLED) {
+		int ret = serial8250_em485_init(up);
+
+		if (ret) {
+			rs485->flags &= ~SER_RS485_ENABLED;
+			port->rs485.flags &= ~SER_RS485_ENABLED;
+		}
+		return ret;
+	}
+
+	serial8250_em485_destroy(up);
+
+	return 0;
+}
+
 static void omap_8250_unthrottle(struct uart_port *port)
 {
+	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned long flags;
-	struct uart_8250_port *up =
-		container_of(port, struct uart_8250_port, port);
 
 	pm_runtime_get_sync(port->dev);
 
@@ -1146,6 +1173,7 @@ static int omap8250_probe(struct platform_device *pdev)
 	up.port.shutdown = omap_8250_shutdown;
 	up.port.throttle = omap_8250_throttle;
 	up.port.unthrottle = omap_8250_unthrottle;
+	up.port.rs485_config = omap_8250_rs485_config;
 
 	if (pdev->dev.of_node) {
 		const struct of_device_id *id;

drivers/tty/serial/8250/8250_pci.c

@@ -55,7 +55,6 @@ struct pci_serial_quirk {
 struct serial_private {
 	struct pci_dev		*dev;
 	unsigned int		nr;
-	void __iomem		*remapped_bar[PCI_NUM_BAR_RESOURCES];
 	struct pci_serial_quirk	*quirk;
 	int			line[0];
 };
@@ -85,15 +84,13 @@ setup_port(struct serial_private *priv, struct uart_8250_port *port,
 		return -EINVAL;
 
 	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
-		if (!priv->remapped_bar[bar])
-			priv->remapped_bar[bar] = pci_ioremap_bar(dev, bar);
-		if (!priv->remapped_bar[bar])
+		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
 			return -ENOMEM;
 
 		port->port.iotype = UPIO_MEM;
 		port->port.iobase = 0;
 		port->port.mapbase = pci_resource_start(dev, bar) + offset;
-		port->port.membase = priv->remapped_bar[bar] + offset;
+		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
 		port->port.regshift = regshift;
 	} else {
 		port->port.iotype = UPIO_PORT;
@@ -721,7 +718,7 @@ static int pci_ni8430_init(struct pci_dev *dev)
 	 */
 	pcibios_resource_to_bus(dev->bus, &region, &dev->resource[bar]);
 	device_window = ((region.start + MITE_IOWBSR1_WIN_OFFSET) & 0xffffff00)
-	                | MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
+			| MITE_IOWBSR1_WENAB | MITE_IOWBSR1_WSIZE;
 	writel(device_window, p + MITE_IOWBSR1);
 
 	/* Set window access to go to RAMSEL IO address space */
@@ -803,12 +800,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
 	unsigned int pi;
 	unsigned short sub_serports;
 
-	pi = (c & 0xff);
+	pi = c & 0xff;
 
-	if (pi == 2) {
+	if (pi == 2)
 		return 1;
-	} else if ((pi == 0) &&
-			   (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
+
+	if ((pi == 0) && (dev->device == PCI_DEVICE_ID_NETMOS_9900)) {
 		/* two possibilities: 0x30ps encodes number of parallel and
 		 * serial ports, or 0x1000 indicates *something*. This is not
 		 * immediately obvious, since the 2s1p+4s configuration seems
@@ -816,12 +813,12 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
 		 * advertising the same function 3 as the 4s+2s1p config.
 		 */
 		sub_serports = dev->subsystem_device & 0xf;
-		if (sub_serports > 0) {
+		if (sub_serports > 0)
 			return sub_serports;
-		} else {
-			dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
-			return 0;
-		}
+
+		dev_err(&dev->dev,
+			"NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+		return 0;
 	}
 
 	moan_device("unknown NetMos/Mostech program interface", dev);
@@ -842,21 +839,21 @@ static int pci_netmos_init(struct pci_dev *dev)
 		return 0;
 
 	switch (dev->device) { /* FALLTHROUGH on all */
-		case PCI_DEVICE_ID_NETMOS_9904:
-		case PCI_DEVICE_ID_NETMOS_9912:
-		case PCI_DEVICE_ID_NETMOS_9922:
-		case PCI_DEVICE_ID_NETMOS_9900:
-			num_serial = pci_netmos_9900_numports(dev);
-			break;
+	case PCI_DEVICE_ID_NETMOS_9904:
+	case PCI_DEVICE_ID_NETMOS_9912:
+	case PCI_DEVICE_ID_NETMOS_9922:
+	case PCI_DEVICE_ID_NETMOS_9900:
+		num_serial = pci_netmos_9900_numports(dev);
+		break;
 
-		default:
-			if (num_serial == 0 ) {
-				moan_device("unknown NetMos/Mostech device", dev);
-			}
+	default:
+		break;
 	}
 
-	if (num_serial == 0)
+	if (num_serial == 0) {
+		moan_device("unknown NetMos/Mostech device", dev);
 		return -ENODEV;
+	}
 
 	return num_serial;
 }
@@ -1198,8 +1195,9 @@ static int pci_quatech_has_qmcr(struct uart_8250_port *port)
 
 static int pci_quatech_test(struct uart_8250_port *port)
 {
-	u8 reg;
-	u8 qopr = pci_quatech_rqopr(port);
+	u8 reg, qopr;
+
+	qopr = pci_quatech_rqopr(port);
 	pci_quatech_wqopr(port, qopr & QPCR_TEST_FOR1);
 	reg = pci_quatech_rqopr(port) & 0xC0;
 	if (reg != QPCR_TEST_GET1)
@@ -1286,6 +1284,7 @@ static int pci_quatech_init(struct pci_dev *dev)
 		unsigned long base = pci_resource_start(dev, 0);
 		if (base) {
 			u32 tmp;
+
 			outl(inl(base + 0x38) | 0x00002000, base + 0x38);
 			tmp = inl(base + 0x3c);
 			outl(tmp | 0x01000000, base + 0x3c);
@@ -1334,29 +1333,6 @@ static int pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
-static int pci_pericom_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	unsigned int bar, offset = board->first_offset, maxnr;
-
-	bar = FL_GET_BASE(board->flags);
-	if (board->flags & FL_BASE_BARS)
-		bar += idx;
-	else
-		offset += idx * board->uart_offset;
-
-	maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
-		(board->reg_shift + 3);
-
-	if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
-		return 1;
-
-	port->port.uartclk = 14745600;
-
-	return setup_port(priv, port, bar, offset, board->reg_shift);
-}
-
 static int
 ce4100_serial_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,
@@ -1541,10 +1517,9 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
 static int pci_fintek_rs485_config(struct uart_port *port,
 			       struct serial_rs485 *rs485)
 {
+	struct pci_dev *pci_dev = to_pci_dev(port->dev);
 	u8 setting;
 	u8 *index = (u8 *) port->private_data;
-	struct pci_dev *pci_dev = container_of(port->dev, struct pci_dev,
-						dev);
 
 	pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
 
@@ -1766,7 +1741,7 @@ xr17v35x_has_slave(struct serial_private *priv)
 	const int dev_id = priv->dev->device;
 
 	return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
-	        (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+		(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
 }
 
 static int
@@ -1866,8 +1841,8 @@ pci_fastcom335_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch353_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16550A;
@@ -1876,8 +1851,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
 
 static int
 pci_wch_ch38x_setup(struct serial_private *priv,
-                    const struct pciserial_board *board,
-                    struct uart_8250_port *port, int idx)
+		    const struct pciserial_board *board,
+		    struct uart_8250_port *port, int idx)
 {
 	port->port.flags |= UPF_FIXED_TYPE;
 	port->port.type = PORT_16850;
@@ -2245,16 +2220,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_default_setup,
 		.exit		= pci_plx9050_exit,
 	},
-	/*
-	 * Pericom
-	 */
-	{
-		.vendor         = PCI_VENDOR_ID_PERICOM,
-		.device         = PCI_ANY_ID,
-		.subvendor      = PCI_ANY_ID,
-		.subdevice      = PCI_ANY_ID,
-		.setup          = pci_pericom_setup,
-	},
 	/*
 	 * PLX
 	 */
@@ -3733,15 +3698,10 @@ static struct pciserial_board pci_boards[] = {
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},
-	/*
-	 * Intel BayTrail HSUART reference clock is 44.2368 MHz at power-on,
-	 * but is overridden by byt_set_termios.
-	 */
 	[pbn_byt] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 1,
 		.base_baud	= 2764800,
-		.uart_offset	= 0x80,
 		.reg_shift      = 2,
 	},
 	[pbn_qrk] = {
@@ -3840,6 +3800,20 @@ static const struct pci_device_id blacklist[] = {
 	{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
 	{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
 
+	/* Moxa Smartio MUE boards handled by 8250_moxa */
+	{ PCI_VDEVICE(MOXA, 0x1024), },
+	{ PCI_VDEVICE(MOXA, 0x1025), },
+	{ PCI_VDEVICE(MOXA, 0x1045), },
+	{ PCI_VDEVICE(MOXA, 0x1144), },
+	{ PCI_VDEVICE(MOXA, 0x1160), },
+	{ PCI_VDEVICE(MOXA, 0x1161), },
+	{ PCI_VDEVICE(MOXA, 0x1182), },
+	{ PCI_VDEVICE(MOXA, 0x1183), },
+	{ PCI_VDEVICE(MOXA, 0x1322), },
+	{ PCI_VDEVICE(MOXA, 0x1342), },
+	{ PCI_VDEVICE(MOXA, 0x1381), },
+	{ PCI_VDEVICE(MOXA, 0x1683), },
+
 	/* Intel platforms with MID UART */
 	{ PCI_VDEVICE(INTEL, 0x081b), },
 	{ PCI_VDEVICE(INTEL, 0x081c), },
@@ -4027,12 +4001,6 @@ void pciserial_remove_ports(struct serial_private *priv)
 	for (i = 0; i < priv->nr; i++)
 		serial8250_unregister_port(priv->line[i]);
 
-	for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
-		if (priv->remapped_bar[i])
-			iounmap(priv->remapped_bar[i]);
-		priv->remapped_bar[i] = NULL;
-	}
-
 	/*
 	 * Find the exit quirks.
 	 */
@@ -4104,7 +4072,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 
 	board = &pci_boards[ent->driver_data];
 
-	rc = pci_enable_device(dev);
+	rc = pcim_enable_device(dev);
 	pci_save_state(dev);
 	if (rc)
 		return rc;
@@ -4123,7 +4091,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 		 */
 		rc = serial_pci_guess_board(dev, &tmp);
 		if (rc)
-			goto disable;
+			return rc;
 	} else {
 		/*
 		 * We matched an explicit entry.  If we are able to
@@ -4139,16 +4107,11 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
 	}
 
 	priv = pciserial_init_ports(dev, board);
-	if (!IS_ERR(priv)) {
-		pci_set_drvdata(dev, priv);
-		return 0;
-	}
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
-	rc = PTR_ERR(priv);
-
- disable:
-	pci_disable_device(dev);
-	return rc;
+	pci_set_drvdata(dev, priv);
+	return 0;
 }
 
 static void pciserial_remove_one(struct pci_dev *dev)
@@ -4156,8 +4119,6 @@ static void pciserial_remove_one(struct pci_dev *dev)
 	struct serial_private *priv = pci_get_drvdata(dev);
 
 	pciserial_remove_ports(priv);
-
-	pci_disable_device(dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -4538,7 +4499,7 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_2_921600 },
 	{	PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI958,
-		PCI_ANY_ID , PCI_ANY_ID, 0, 0,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_8_1152000 },
 
 	/*

drivers/tty/serial/8250/8250_pnp.c

@@ -357,8 +357,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	/* Fujitsu Wacom 1FGT Tablet PC device */
 	{	"FUJ02E9",		0	},
 	/*
-	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
-	 * disguise)
+	 * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6
+	 * in disguise).
 	 */
 	{	"LTS0001",		0       },
 	/* Rockwell's (PORALiNK) 33600 INT PNP */
@@ -367,12 +367,14 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"PNPCXXX",		UNKNOWN_DEV	},
 	/* More unknown PnP modems */
 	{	"PNPDXXX",		UNKNOWN_DEV	},
-	/* Winbond CIR port, should not be probed. We should keep track
-	   of it to prevent the legacy serial driver from probing it */
+	/*
+	 * Winbond CIR port, should not be probed. We should keep track of
+	 * it to prevent the legacy serial driver from probing it.
+	 */
 	{	"WEC1022",		CIR_PORT	},
 	/*
-	 * SMSC IrCC SIR/FIR port, should not be probed by serial driver
-	 * as well so its own driver can bind to it.
+	 * SMSC IrCC SIR/FIR port, should not be probed by serial driver as
+	 * well so its own driver can bind to it.
 	 */
 	{	"SMCF010",		CIR_PORT	},
 	{	"",			0	}
@@ -380,35 +382,35 @@ static const struct pnp_device_id pnp_dev_table[] = {
 
 MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
 
-static char *modem_names[] = {
+static const char *modem_names[] = {
 	"MODEM", "Modem", "modem", "FAX", "Fax", "fax",
 	"56K", "56k", "K56", "33.6", "28.8", "14.4",
 	"33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
 	"33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
 };
 
-static int check_name(char *name)
+static bool check_name(const char *name)
 {
-	char **tmp;
+	const char **tmp;
 
 	for (tmp = modem_names; *tmp; tmp++)
 		if (strstr(name, *tmp))
-			return 1;
+			return true;
 
-	return 0;
+	return false;
 }
 
-static int check_resources(struct pnp_dev *dev)
+static bool check_resources(struct pnp_dev *dev)
 {
-	resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
-	int i;
+	static const resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8};
+	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(base); i++) {
 		if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8))
-			return 1;
+			return true;
 	}
 
-	return 0;
+	return false;
 }
 
 /*
@@ -425,8 +427,8 @@ static int check_resources(struct pnp_dev *dev)
 static int serial_pnp_guess_board(struct pnp_dev *dev)
 {
 	if (!(check_name(pnp_dev_name(dev)) ||
-		(dev->card && check_name(dev->card->name))))
-			return -ENODEV;
+	    (dev->card && check_name(dev->card->name))))
+		return -ENODEV;
 
 	if (check_resources(dev))
 		return 0;
@@ -462,11 +464,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	} else
 		return -ENODEV;
 
-#ifdef SERIAL_DEBUG_PNP
-	printk(KERN_DEBUG
-		"Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
-		       uart.port.iobase, uart.port.mapbase, uart.port.irq, uart.port.iotype);
-#endif
+	dev_dbg(&dev->dev,
+		 "Setup PNP port: port %lx, mem %pa, irq %d, type %d\n",
+		 uart.port.iobase, &uart.port.mapbase,
+		 uart.port.irq, uart.port.iotype);
+
 	if (flags & CIR_PORT) {
 		uart.port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
 		uart.port.type = PORT_8250_CIR;

drivers/tty/serial/8250/8250_uniphier.c

@@ -35,7 +35,7 @@ struct uniphier8250_priv {
 	spinlock_t atomic_write_lock;
 };
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && !defined(MODULE)
 static int __init uniphier_early_console_setup(struct earlycon_device *device,
 					       const char *options)
 {

drivers/tty/serial/8250/Kconfig

@@ -262,7 +262,12 @@ config SERIAL_8250_RSA
 	bool "Support RSA serial ports"
 	depends on SERIAL_8250_EXTENDED
 	help
-	  ::: To be written :::
+	  Say Y here if you have a IODATA RSA-DV II/S ISA card and
+	  would like to use its >115kbps speeds.
+	  You will need to provide module parameter "probe_rsa", or boot-time
+	  parameter 8250.probe_rsa with I/O addresses of this card then.
+
+	  If you don't have such card, or if unsure, say N.
 
 config SERIAL_8250_ACORN
 	tristate "Acorn expansion card serial port support"
@@ -272,6 +277,30 @@ config SERIAL_8250_ACORN
 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
 	  cards.  If unsure, say N.
 
+config SERIAL_8250_BCM2835AUX
+	tristate "BCM2835 auxiliar mini UART support"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on SERIAL_8250 && SERIAL_8250_SHARE_IRQ
+	help
+	  Support for the BCM2835 auxiliar mini UART.
+
+	  Features and limitations of the UART are
+	    Registers are similar to 16650 registers,
+              set bits in the control registers that are unsupported
+	      are ignored and read back as 0
+	    7/8 bit operation with 1 start and 1 stop bit
+	    8 symbols deep fifo for rx and tx
+	    SW controlled RTS and SW readable CTS
+	    Clock rate derived from system clock
+	    Uses 8 times oversampling (compared to 16 times for 16650)
+	    Missing break detection (but break generation)
+	    Missing framing error detection
+	    Missing parity bit
+	    Missing receive time-out interrupt
+	    Missing DCD, DSR, DTR and RI signals
+
+	  If unsure, say N.
+
 config SERIAL_8250_FSL
 	bool
 	depends on SERIAL_8250_CONSOLE
@@ -295,6 +324,7 @@ config SERIAL_8250_EM
 config SERIAL_8250_RT288X
 	bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
 	depends on SERIAL_8250
+	depends on MIPS || COMPILE_TEST
 	default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
 	help
 	  Selecting this option will add support for the alternate register
@@ -346,7 +376,7 @@ config SERIAL_8250_LPC18XX
 	  serial port, say Y to this option. If unsure, say Y.
 
 config SERIAL_8250_MT6577
-	bool "Mediatek serial port support"
+	tristate "Mediatek serial port support"
 	depends on SERIAL_8250 && ARCH_MEDIATEK
 	help
 	  If you have a Mediatek based board and want to use the
@@ -360,9 +390,10 @@ config SERIAL_8250_UNIPHIER
 	  serial ports, say Y to this option. If unsure, say N.
 
 config SERIAL_8250_INGENIC
-	bool "Support for Ingenic SoC serial ports"
-	depends on OF_FLATTREE
-	select LIBFDT
+	tristate "Support for Ingenic SoC serial ports"
+	depends on SERIAL_8250
+	depends on (OF_FLATTREE && SERIAL_8250_CONSOLE) || !SERIAL_EARLYCON
+	depends on MIPS || COMPILE_TEST
 	help
 	  If you have a system using an Ingenic SoC and wish to make use of
 	  its UARTs, say Y to this option. If unsure, say N.
@@ -378,6 +409,16 @@ config SERIAL_8250_MID
 	  present on the UART found on Intel Medfield SOC and various other
 	  Intel platforms.
 
+config SERIAL_8250_MOXA
+	tristate "MOXA SmartIO MUE support"
+	depends on SERIAL_8250 && PCI
+	help
+	  Say Y here if you have a Moxa SmartIO MUE multiport serial card.
+	  If unsure, say N.
+
+	  This driver can also be built as a module. The module will be called
+	  8250_moxa. If you want to do that, say M here.
+
 config SERIAL_OF_PLATFORM
 	tristate "Devicetree based probing for 8250 ports"
 	depends on SERIAL_8250 && OF

drivers/tty/serial/8250/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
 obj-$(CONFIG_SERIAL_8250_CS)		+= serial_cs.o
 obj-$(CONFIG_SERIAL_8250_ACORN)		+= 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_BCM2835AUX)	+= 8250_bcm2835aux.o
 obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= 8250_early.o
 obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
 obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
@@ -28,6 +29,7 @@ obj-$(CONFIG_SERIAL_8250_MT6577)	+= 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)	+= 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)	+= 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_MOXA)		+= 8250_moxa.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)	+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt

drivers/tty/serial/8250/serial_cs.c

@@ -28,7 +28,7 @@
     and other provisions required by the GPL.  If you do not delete
     the provisions above, a recipient may use your version of this
     file under either the MPL or the GPL.
-    
+
 ======================================================================*/
 
 #include <linux/module.h>
@@ -257,7 +257,7 @@ static const struct serial_quirk quirks[] = {
 };
 
 
-static int serial_config(struct pcmcia_device * link);
+static int serial_config(struct pcmcia_device *link);
 
 
 static void serial_remove(struct pcmcia_device *link)
@@ -309,7 +309,7 @@ static int serial_probe(struct pcmcia_device *link)
 	dev_dbg(&link->dev, "serial_attach()\n");
 
 	/* Create new serial device */
-	info = kzalloc(sizeof (*info), GFP_KERNEL);
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
 	info->p_dev = link;
@@ -339,7 +339,7 @@ static void serial_detach(struct pcmcia_device *link)
 
 /*====================================================================*/
 
-static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
+static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
 			unsigned int iobase, int irq)
 {
 	struct uart_8250_port uart;
@@ -441,16 +441,20 @@ static int simple_config(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i = -ENODEV, try;
 
-	/* First pass: look for a config entry that looks normal.
-	 * Two tries: without IO aliases, then with aliases */
+	/*
+	 * First pass: look for a config entry that looks normal.
+	 * Two tries: without IO aliases, then with aliases.
+	 */
 	link->config_flags |= CONF_AUTO_SET_VPP;
 	for (try = 0; try < 4; try++)
 		if (!pcmcia_loop_config(link, simple_config_check, &try))
 			goto found_port;
 
-	/* Second pass: try to find an entry that isn't picky about
-	   its base address, then try to grab any standard serial port
-	   address, and finally try to get any free port. */
+	/*
+	 * Second pass: try to find an entry that isn't picky about
+	 * its base address, then try to grab any standard serial port
+	 * address, and finally try to get any free port.
+	 */
 	if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
 		goto found_port;
 
@@ -480,8 +484,10 @@ static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
 	if (p_dev->resource[1]->end)
 		return -EINVAL;
 
-	/* The quad port cards have bad CIS's, so just look for a
-	   window larger than 8 ports and assume it will be right */
+	/*
+	 * The quad port cards have bad CIS's, so just look for a
+	 * window larger than 8 ports and assume it will be right.
+	 */
 	if (p_dev->resource[0]->end <= 8)
 		return -EINVAL;
 
@@ -527,8 +533,8 @@ static int multi_config(struct pcmcia_device *link)
 		info->multi = 2;
 		if (pcmcia_loop_config(link, multi_config_check_notpicky,
 				       &base2)) {
-			dev_warn(&link->dev, "no usable port range "
-			       "found, giving up\n");
+			dev_warn(&link->dev,
+				 "no usable port range found, giving up\n");
 			return -ENODEV;
 		}
 	}
@@ -600,7 +606,7 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev,  void *priv_data)
 }
 
 
-static int serial_config(struct pcmcia_device * link)
+static int serial_config(struct pcmcia_device *link)
 {
 	struct serial_info *info = link->priv;
 	int i;
@@ -623,8 +629,10 @@ static int serial_config(struct pcmcia_device * link)
 			break;
 		}
 
-	/* Another check for dual-serial cards: look for either serial or
-	   multifunction cards that ask for appropriate IO port ranges */
+	/*
+	 * Another check for dual-serial cards: look for either serial or
+	 * multifunction cards that ask for appropriate IO port ranges.
+	 */
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
 	    (link->socket->pcmcia_pfc == 0) &&
@@ -701,7 +709,7 @@ static const struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
-	PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
@@ -797,30 +805,30 @@ static const struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
 	PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
 	PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100  1.00.",0x19ca78af,0xf964f42b),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232  1.00.",0x19ca78af,0x69fb7490),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
-	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
-	PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
-	PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
-	PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
-	PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
-	PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100  1.00.", 0x19ca78af, 0xf964f42b),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232  1.00.", 0x19ca78af, 0x69fb7490),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
+	PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
+	PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
+	PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
 	PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
 	/* too generic */
 	/* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */

drivers/tty/serial/Kconfig

@@ -610,6 +610,7 @@ config SERIAL_UARTLITE_CONSOLE
 	bool "Support for console on Xilinx uartlite serial port"
 	depends on SERIAL_UARTLITE=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Say Y here if you wish to use a Xilinx uartlite as the system
 	  console (the system console is the device which receives all kernel
@@ -732,7 +733,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on SUPERH || ARCH_SHMOBILE || H8300 || COMPILE_TEST
+	depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
@@ -745,6 +746,12 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_EARLYCON
+	bool "Support for early console on SuperH SCI(F)"
+	depends on SERIAL_SH_SCI=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+
 config SERIAL_SH_SCI_DMA
 	bool "DMA support"
 	depends on SERIAL_SH_SCI && DMA_ENGINE
@@ -793,17 +800,6 @@ config SERIAL_CORE_CONSOLE
 config CONSOLE_POLL
 	bool
 
-config SERIAL_68328
-	bool "68328 serial support"
-	depends on M68328 || M68EZ328 || M68VZ328
-	help
-	  This driver supports the built-in serial port of the Motorola 68328
-	  (standard, EZ and VZ varieties).
-
-config SERIAL_68328_RTS_CTS
-	bool "Support RTS/CTS on 68328 serial port"
-	depends on SERIAL_68328
-
 config SERIAL_MCF
 	bool "Coldfire serial support"
 	depends on COLDFIRE
@@ -1606,6 +1602,28 @@ config SERIAL_STM32_CONSOLE
 	depends on SERIAL_STM32=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_MVEBU_UART
+	bool "Marvell EBU serial port support"
+	select SERIAL_CORE
+	help
+	  This driver is for Marvell EBU SoC's UART. If you have a machine
+	  based on the Armada-3700 SoC and wish to use the on-board serial
+	  port,
+	  say 'Y' here.
+	  Otherwise, say 'N'.
+
+config SERIAL_MVEBU_CONSOLE
+	bool "Console on Marvell EBU serial port"
+	depends on SERIAL_MVEBU_UART
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+	default y
+	help
+	  Say 'Y' here if you wish to use Armada-3700 UART as the system console.
+	  (the system console is the device which receives all kernel messages
+	  and warnings and which allows logins in single user mode)
+	  Otherwise, say 'N'.
+
 endmenu
 
 config SERIAL_MCTRL_GPIO

drivers/tty/serial/Makefile

@@ -34,7 +34,6 @@ obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
-obj-$(CONFIG_SERIAL_68328) += 68328serial.o
 obj-$(CONFIG_SERIAL_MCF) += mcf.o
 obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
 obj-$(CONFIG_SERIAL_HS_LPC32XX) += lpc32xx_hs.o
@@ -91,6 +90,7 @@ obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR)	+= digicolor-usart.o
 obj-$(CONFIG_SERIAL_MEN_Z135)	+= men_z135_uart.o
 obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
 obj-$(CONFIG_SERIAL_STM32)	+= stm32-usart.o
+obj-$(CONFIG_SERIAL_MVEBU_UART)	+= mvebu-uart.o
 
 # GPIOLIB helpers for modem control lines
 obj-$(CONFIG_SERIAL_MCTRL_GPIO)	+= serial_mctrl_gpio.o

drivers/tty/serial/amba-pl011.c

@@ -187,7 +187,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = {
 	[REG_DMACR] = ZX_UART011_DMACR,
 };
 
-static struct vendor_data vendor_zte = {
+static struct vendor_data vendor_zte __maybe_unused = {
 	.reg_offset		= pl011_zte_offsets,
 	.access_32b		= true,
 	.ifls			= UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
@@ -420,7 +420,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap)
 	/* Optionally make use of an RX channel as well */
 	chan = dma_request_slave_channel(dev, "rx");
 
-	if (!chan && plat->dma_rx_param) {
+	if (!chan && plat && plat->dma_rx_param) {
 		chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
 
 		if (!chan) {
@@ -1167,7 +1167,7 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap)
 
 	/* Disable RX and TX DMA */
 	while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
-		barrier();
+		cpu_relax();
 
 	spin_lock_irq(&uap->port.lock);
 	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
@@ -1611,7 +1611,7 @@ static void pl011_put_poll_char(struct uart_port *port,
 	    container_of(port, struct uart_amba_port, port);
 
 	while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
-		barrier();
+		cpu_relax();
 
 	pl011_write(ch, uap, REG_DR);
 }
@@ -1947,6 +1947,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		lcr_h |= UART01x_LCRH_PEN;
 		if (!(termios->c_cflag & PARODD))
 			lcr_h |= UART01x_LCRH_EPS;
+		if (termios->c_cflag & CMSPAR)
+			lcr_h |= UART011_LCRH_SPS;
 	}
 	if (uap->fifosize > 1)
 		lcr_h |= UART01x_LCRH_FEN;
@@ -2150,7 +2152,7 @@ static void pl011_console_putchar(struct uart_port *port, int ch)
 	    container_of(port, struct uart_amba_port, port);
 
 	while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF)
-		barrier();
+		cpu_relax();
 	pl011_write(ch, uap, REG_DR);
 }
 
@@ -2158,7 +2160,7 @@ static void
 pl011_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_amba_port *uap = amba_ports[co->index];
-	unsigned int status, old_cr = 0, new_cr;
+	unsigned int old_cr = 0, new_cr;
 	unsigned long flags;
 	int locked = 1;
 
@@ -2188,9 +2190,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	 *	Finally, wait for transmitter to become empty
 	 *	and restore the TCR
 	 */
-	do {
-		status = pl011_read(uap, REG_FR);
-	} while (status & UART01x_FR_BUSY);
+	while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY)
+		cpu_relax();
 	if (!uap->vendor->always_enabled)
 		pl011_write(old_cr, uap, REG_CR);
 
@@ -2302,13 +2303,13 @@ static struct console amba_console = {
 static void pl011_putc(struct uart_port *port, int c)
 {
 	while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
-		;
+		cpu_relax();
 	if (port->iotype == UPIO_MEM32)
 		writel(c, port->membase + UART01x_DR);
 	else
 		writeb(c, port->membase + UART01x_DR);
 	while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
-		;
+		cpu_relax();
 }
 
 static void pl011_early_write(struct console *con, const char *s, unsigned n)
@@ -2327,7 +2328,6 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
 	device->con->write = pl011_early_write;
 	return 0;
 }
-EARLYCON_DECLARE(pl011, pl011_early_console_setup);
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
 
 #else

drivers/tty/serial/arc_uart.c

@@ -576,7 +576,6 @@ static int __init arc_early_console_setup(struct earlycon_device *dev,
 	dev->con->write = arc_early_serial_write;
 	return 0;
 }
-EARLYCON_DECLARE(arc_uart, arc_early_console_setup);
 OF_EARLYCON_DECLARE(arc_uart, "snps,arc-uart", arc_early_console_setup);
 
 #endif	/* CONFIG_SERIAL_ARC_CONSOLE */

drivers/tty/serial/clps711x.c

@@ -450,6 +450,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	struct clps711x_port *s;
 	struct resource *res;
 	struct clk *uart_clk;
+	int irq;
 
 	if (index < 0 || index >= UART_CLPS711X_NR)
 		return -EINVAL;
@@ -467,12 +468,13 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	if (IS_ERR(s->port.membase))
 		return PTR_ERR(s->port.membase);
 
-	s->port.irq = platform_get_irq(pdev, 0);
-	if (IS_ERR_VALUE(s->port.irq))
-		return s->port.irq;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+	s->port.irq = irq;
 
 	s->rx_irq = platform_get_irq(pdev, 1);
-	if (IS_ERR_VALUE(s->rx_irq))
+	if (s->rx_irq < 0)
 		return s->rx_irq;
 
 	if (!np) {

drivers/tty/serial/omap-serial.c

@@ -1870,7 +1870,7 @@ static struct platform_driver serial_omap_driver = {
 	.probe          = serial_omap_probe,
 	.remove         = serial_omap_remove,
 	.driver		= {
-		.name	= DRIVER_NAME,
+		.name	= OMAP_SERIAL_DRIVER_NAME,
 		.pm	= &serial_omap_dev_pm_ops,
 		.of_match_table = of_match_ptr(omap_serial_of_match),
 	},