提交 9666f400 编写于 作者: T Tejun Heo 提交者: Jeff Garzik

libata: reimplement suspend/resume support using sdev->manage_start_stop

Reimplement suspend/resume support using sdev->manage_start_stop.

* Device suspend/resume is now SCSI layer's responsibility and the
  code is simplified a lot.

* DPM is dropped.  This also simplifies code a lot.  Suspend/resume
  status is port-wide now.

* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.

* Resume now has to wait for disk to spin up before proceeding.  I
  couldn't find easy way out as libata is in EH waiting for the
  disk to be ready and sd is waiting for EH to complete to issue
  START_STOP.

* sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
  This fixes spindown on shutdown and suspend-to-disk.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 0a3fd051
......@@ -250,10 +250,6 @@ static struct scsi_host_template ahci_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations ahci_ops = {
......
......@@ -54,7 +54,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_ready(dev)) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->dma_mode = XFER_MW_DMA_0;
......@@ -90,10 +90,6 @@ static struct scsi_host_template generic_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations generic_port_ops = {
......
......@@ -275,10 +275,6 @@ static struct scsi_host_template piix_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations piix_pata_ops = {
......
......@@ -2860,7 +2860,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
dev = &ap->device[i];
/* don't update suspended devices' xfer mode */
if (!ata_dev_ready(dev))
if (!ata_dev_enabled(dev))
continue;
rc = ata_dev_set_mode(dev);
......@@ -5845,37 +5845,11 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
*/
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
{
int i, j, rc;
int rc;
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
if (rc)
goto fail;
/* EH is quiescent now. Fail if we have any ready device.
* This happens if hotplug occurs between completion of device
* suspension and here.
*/
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
for (j = 0; j < ATA_MAX_DEVICES; j++) {
struct ata_device *dev = &ap->device[j];
if (ata_dev_ready(dev)) {
ata_port_printk(ap, KERN_WARNING,
"suspend failed, device %d "
"still active\n", dev->devno);
rc = -EBUSY;
goto fail;
}
}
}
host->dev->power.power_state = mesg;
return 0;
fail:
ata_host_resume(host);
if (rc == 0)
host->dev->power.power_state = mesg;
return rc;
}
......@@ -6889,11 +6863,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter);
EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
EXPORT_SYMBOL_GPL(ata_port_abort);
......
......@@ -77,29 +77,12 @@ static void ata_eh_finish(struct ata_port *ap);
#ifdef CONFIG_PM
static void ata_eh_handle_port_suspend(struct ata_port *ap);
static void ata_eh_handle_port_resume(struct ata_port *ap);
static int ata_eh_suspend(struct ata_port *ap,
struct ata_device **r_failed_dev);
static void ata_eh_prep_resume(struct ata_port *ap);
static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
#else /* CONFIG_PM */
static void ata_eh_handle_port_suspend(struct ata_port *ap)
{ }
static void ata_eh_handle_port_resume(struct ata_port *ap)
{ }
static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
{
return 0;
}
static void ata_eh_prep_resume(struct ata_port *ap)
{ }
static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
{
return 0;
}
#endif /* CONFIG_PM */
static void ata_ering_record(struct ata_ering *ering, int is_io,
......@@ -1791,7 +1774,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
goto err;
......@@ -1872,166 +1855,6 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
return rc;
}
#ifdef CONFIG_PM
/**
* ata_eh_suspend - handle suspend EH action
* @ap: target host port
* @r_failed_dev: result parameter to indicate failing device
*
* Handle suspend EH action. Disk devices are spinned down and
* other types of devices are just marked suspended. Once
* suspended, no EH action to the device is allowed until it is
* resumed.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise
*/
static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
{
struct ata_device *dev;
int i, rc = 0;
DPRINTK("ENTER\n");
for (i = 0; i < ATA_MAX_DEVICES; i++) {
unsigned long flags;
unsigned int action, err_mask;
dev = &ap->device[i];
action = ata_eh_dev_action(dev);
if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
continue;
WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
/* flush cache */
rc = ata_flush_cache(dev);
if (rc)
break;
/* spin down */
err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to "
"spin down (err_mask=0x%x)\n",
err_mask);
rc = -EIO;
break;
}
}
spin_lock_irqsave(ap->lock, flags);
dev->flags |= ATA_DFLAG_SUSPENDED;
spin_unlock_irqrestore(ap->lock, flags);
ata_eh_done(ap, dev, ATA_EH_SUSPEND);
}
if (rc)
*r_failed_dev = dev;
DPRINTK("EXIT\n");
return rc;
}
/**
* ata_eh_prep_resume - prep for resume EH action
* @ap: target host port
*
* Clear SUSPENDED in preparation for scheduled resume actions.
* This allows other parts of EH to access the devices being
* resumed.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_prep_resume(struct ata_port *ap)
{
struct ata_device *dev;
unsigned long flags;
int i;
DPRINTK("ENTER\n");
for (i = 0; i < ATA_MAX_DEVICES; i++) {
unsigned int action;
dev = &ap->device[i];
action = ata_eh_dev_action(dev);
if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
continue;
spin_lock_irqsave(ap->lock, flags);
dev->flags &= ~ATA_DFLAG_SUSPENDED;
spin_unlock_irqrestore(ap->lock, flags);
}
DPRINTK("EXIT\n");
}
/**
* ata_eh_resume - handle resume EH action
* @ap: target host port
* @r_failed_dev: result parameter to indicate failing device
*
* Handle resume EH action. Target devices are already reset and
* revalidated. Spinning up is the only operation left.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise
*/
static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
{
struct ata_device *dev;
int i, rc = 0;
DPRINTK("ENTER\n");
for (i = 0; i < ATA_MAX_DEVICES; i++) {
unsigned int action, err_mask;
dev = &ap->device[i];
action = ata_eh_dev_action(dev);
if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
continue;
ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
err_mask = ata_do_simple_cmd(dev,
ATA_CMD_IDLEIMMEDIATE);
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to "
"spin up (err_mask=0x%x)\n",
err_mask);
rc = -EIO;
break;
}
}
ata_eh_done(ap, dev, ATA_EH_RESUME);
}
if (rc)
*r_failed_dev = dev;
DPRINTK("EXIT\n");
return 0;
}
#endif /* CONFIG_PM */
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
......@@ -2057,17 +1880,6 @@ static int ata_eh_skip_recovery(struct ata_port *ap)
struct ata_eh_context *ehc = &ap->eh_context;
int i;
/* skip if all possible devices are suspended */
for (i = 0; i < ata_port_max_devices(ap); i++) {
struct ata_device *dev = &ap->device[i];
if (!(dev->flags & ATA_DFLAG_SUSPENDED))
break;
}
if (i == ata_port_max_devices(ap))
return 1;
/* thaw frozen port, resume link and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
......@@ -2147,9 +1959,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
/* prep for resume */
ata_eh_prep_resume(ap);
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
......@@ -2177,11 +1986,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
if (rc)
goto dev_fail;
/* resume devices */
rc = ata_eh_resume(ap, &dev);
if (rc)
goto dev_fail;
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
......@@ -2190,11 +1994,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
/* suspend devices */
rc = ata_eh_suspend(ap, &dev);
if (rc)
goto dev_fail;
goto out;
dev_fail:
......@@ -2390,22 +2189,13 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
*
* Resume @ap.
*
* This function also waits upto one second until all devices
* hanging off this port requests resume EH action. This is to
* prevent invoking EH and thus reset multiple times on resume.
*
* On DPM resume, where some of devices might not be resumed
* together, this may delay port resume upto one second, but such
* DPM resumes are rare and 1 sec delay isn't too bad.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
unsigned long timeout;
unsigned long flags;
int i, rc = 0;
int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
......@@ -2416,31 +2206,12 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
}
spin_unlock_irqrestore(ap->lock, flags);
/* spurious? */
if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
goto done;
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
/* give devices time to request EH */
timeout = jiffies + HZ; /* 1s max */
while (1) {
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
unsigned int action = ata_eh_dev_action(dev);
if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
!(action & ATA_EH_RESUME))
break;
}
if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
break;
msleep(10);
}
done:
/* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
if (ap->pm_result) {
......
......@@ -510,133 +510,6 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
}
}
#ifdef CONFIG_PM
/**
* ata_scsi_device_suspend - suspend ATA device associated with sdev
* @sdev: the SCSI device to suspend
* @mesg: target power management message
*
* Request suspend EH action on the ATA device associated with
* @sdev and wait for the operation to complete.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
unsigned long flags;
unsigned int action;
int rc = 0;
if (!dev)
goto out;
spin_lock_irqsave(ap->lock, flags);
/* wait for the previous resume to complete */
while (dev->flags & ATA_DFLAG_SUSPENDED) {
spin_unlock_irqrestore(ap->lock, flags);
ata_port_wait_eh(ap);
spin_lock_irqsave(ap->lock, flags);
}
/* if @sdev is already detached, nothing to do */
if (sdev->sdev_state == SDEV_OFFLINE ||
sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
goto out_unlock;
/* request suspend */
action = ATA_EH_SUSPEND;
if (mesg.event != PM_EVENT_SUSPEND)
action |= ATA_EH_PM_FREEZE;
ap->eh_info.dev_action[dev->devno] |= action;
ap->eh_info.flags |= ATA_EHI_QUIET;
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* wait for EH to do the job */
ata_port_wait_eh(ap);
spin_lock_irqsave(ap->lock, flags);
/* If @sdev is still attached but the associated ATA device
* isn't suspended, the operation failed.
*/
if (sdev->sdev_state != SDEV_OFFLINE &&
sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
!(dev->flags & ATA_DFLAG_SUSPENDED))
rc = -EIO;
out_unlock:
spin_unlock_irqrestore(ap->lock, flags);
out:
if (rc == 0)
sdev->sdev_gendev.power.power_state = mesg;
return rc;
}
/**
* ata_scsi_device_resume - resume ATA device associated with sdev
* @sdev: the SCSI device to resume
*
* Request resume EH action on the ATA device associated with
* @sdev and return immediately. This enables parallel
* wakeup/spinup of devices.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0.
*/
int ata_scsi_device_resume(struct scsi_device *sdev)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
struct ata_eh_info *ehi = &ap->eh_info;
unsigned long flags;
unsigned int action;
if (!dev)
goto out;
spin_lock_irqsave(ap->lock, flags);
/* if @sdev is already detached, nothing to do */
if (sdev->sdev_state == SDEV_OFFLINE ||
sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
goto out_unlock;
/* request resume */
action = ATA_EH_RESUME;
if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
__ata_ehi_hotplugged(ehi);
else
action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
ehi->dev_action[dev->devno] |= action;
/* We don't want autopsy and verbose EH messages. Disable
* those if we're the only device on this link.
*/
if (ata_port_max_devices(ap) == 1)
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ata_port_schedule_eh(ap);
out_unlock:
spin_unlock_irqrestore(ap->lock, flags);
out:
sdev->sdev_gendev.power.power_state = PMSG_ON;
return 0;
}
#endif /* CONFIG_PM */
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
......@@ -929,6 +802,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
sdev->manage_start_stop = 1;
if (dev)
ata_scsi_dev_config(sdev, dev);
......
......@@ -291,10 +291,6 @@ static struct scsi_host_template ali_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
/*
......
......@@ -324,10 +324,6 @@ static struct scsi_host_template amd_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations amd33_port_ops = {
......
......@@ -229,10 +229,6 @@ static struct scsi_host_template atiixp_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations atiixp_port_ops = {
......
......@@ -181,10 +181,6 @@ static struct scsi_host_template cmd640_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cmd640_port_ops = {
......
......@@ -266,10 +266,6 @@ static struct scsi_host_template cmd64x_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cmd64x_port_ops = {
......
......@@ -155,10 +155,6 @@ static struct scsi_host_template cs5520_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cs5520_port_ops = {
......
......@@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cs5530_port_ops = {
......
......@@ -173,10 +173,6 @@ static struct scsi_host_template cs5535_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cs5535_port_ops = {
......
......@@ -125,10 +125,6 @@ static struct scsi_host_template cy82c693_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations cy82c693_port_ops = {
......
......@@ -247,10 +247,6 @@ static struct scsi_host_template efar_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations efar_ops = {
......
......@@ -331,10 +331,6 @@ static struct scsi_host_template hpt36x_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
/*
......
......@@ -100,10 +100,6 @@ static struct scsi_host_template hpt3x3_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations hpt3x3_port_ops = {
......
......@@ -257,10 +257,6 @@ static struct scsi_host_template it8213_sht = {
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations it8213_ops = {
......
......@@ -620,10 +620,6 @@ static struct scsi_host_template it821x_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations it821x_smart_port_ops = {
......
......@@ -31,7 +31,7 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_ready(dev)) {
if (ata_dev_enabled(dev)) {
ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
......
......@@ -138,10 +138,6 @@ static struct scsi_host_template jmicron_sht = {
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations jmicron_ops = {
......
......@@ -107,10 +107,6 @@ static struct scsi_host_template marvell_sht = {
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations marvell_ops = {
......
......@@ -280,10 +280,6 @@ static struct scsi_host_template mpc52xx_ata_sht = {
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
......
......@@ -165,10 +165,6 @@ static struct scsi_host_template mpiix_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations mpiix_port_ops = {
......
......@@ -37,10 +37,6 @@ static struct scsi_host_template netcell_sht = {
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations netcell_ops = {
......
......@@ -158,10 +158,6 @@ static struct scsi_host_template ns87410_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations ns87410_port_ops = {
......
......@@ -234,10 +234,6 @@ static struct scsi_host_template oldpiix_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations oldpiix_pata_ops = {
......
......@@ -179,10 +179,6 @@ static struct scsi_host_template opti_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations opti_port_ops = {
......
......@@ -363,10 +363,6 @@ static struct scsi_host_template optidma_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations optidma_port_ops = {
......
......@@ -244,10 +244,6 @@ static struct scsi_host_template pdc202xx_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations pdc2024x_port_ops = {
......
......@@ -200,10 +200,6 @@ static struct scsi_host_template radisys_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations radisys_pata_ops = {
......
......@@ -40,7 +40,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_ready(dev)) {
if (ata_dev_enabled(dev)) {
/* We don't really care */
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
......@@ -69,10 +69,6 @@ static struct scsi_host_template rz1000_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations rz1000_port_ops = {
......
......@@ -194,10 +194,6 @@ static struct scsi_host_template sc1200_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations sc1200_port_ops = {
......
......@@ -984,10 +984,6 @@ static struct scsi_host_template scc_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations scc_pata_ops = {
......
......@@ -315,10 +315,6 @@ static struct scsi_host_template serverworks_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations serverworks_osb4_port_ops = {
......
......@@ -232,10 +232,6 @@ static struct scsi_host_template sil680_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static struct ata_port_operations sil680_port_ops = {
......
......@@ -524,10 +524,6 @@ static struct scsi_host_template sis_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static const struct ata_port_operations sis_133_ops = {
......
......@@ -194,10 +194,6 @@ static struct scsi_host_template triflex_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations triflex_port_ops = {
......
......@@ -301,10 +301,6 @@ static struct scsi_host_template via_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
#endif
};
static struct ata_port_operations via_port_ops = {
......
......@@ -135,10 +135,6 @@ static struct scsi_host_template inic_sht = {
.slave_configure = inic_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const int scr_map[] = {
......
......@@ -325,10 +325,6 @@ static struct scsi_host_template nv_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static struct scsi_host_template nv_adma_sht = {
......@@ -347,10 +343,6 @@ static struct scsi_host_template nv_adma_sht = {
.slave_configure = nv_adma_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations nv_generic_ops = {
......
......@@ -182,10 +182,6 @@ static struct scsi_host_template sil_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations sil_ops = {
......
......@@ -380,10 +380,6 @@ static struct scsi_host_template sil24_sht = {
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
#endif
};
static const struct ata_port_operations sil24_ops = {
......
......@@ -140,7 +140,6 @@ enum {
ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */
ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */
ATA_DFLAG_SUSPENDED = (1 << 10), /* device suspended */
ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
ATA_DFLAG_DETACH = (1 << 16),
......@@ -268,13 +267,9 @@ enum {
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
ATA_EH_SUSPEND = (1 << 3),
ATA_EH_RESUME = (1 << 4),
ATA_EH_PM_FREEZE = (1 << 5),
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
ATA_EH_RESUME | ATA_EH_PM_FREEZE,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
......@@ -736,8 +731,6 @@ extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val);
extern int ata_port_online(struct ata_port *ap);
extern int ata_port_offline(struct ata_port *ap);
#ifdef CONFIG_PM
extern int ata_scsi_device_resume(struct scsi_device *);
extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
......@@ -1008,11 +1001,6 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev)
return ata_class_absent(dev->class);
}
static inline unsigned int ata_dev_ready(const struct ata_device *dev)
{
return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
}
/*
* port helpers
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册