serial: 8250: Allow drivers to deliver capabilities

Modern UARTs are able to provide information about their
capabilities such as FIFO size. This allows the drivers to
deliver this information to 8250.c when they are registering
ports.
Signed-off-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250.c

@@ -1911,9 +1911,12 @@ static int serial8250_startup(struct uart_port *port)
 	if (port->type == PORT_8250_CIR)
 		return -ENODEV;
 
-	port->fifosize = uart_config[up->port.type].fifo_size;
-	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
-	up->capabilities = uart_config[up->port.type].flags;
+	if (!port->fifosize)
+		port->fifosize = uart_config[port->type].fifo_size;
+	if (!up->tx_loadsz)
+		up->tx_loadsz = uart_config[port->type].tx_loadsz;
+	if (!up->capabilities)
+		up->capabilities = uart_config[port->type].flags;
 	up->mcr = 0;
 
 	if (port->iotype != up->cur_iotype)
@@ -2746,9 +2749,12 @@ static void
 serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type)
 {
 	up->port.type = type;
-	up->port.fifosize = uart_config[type].fifo_size;
-	up->capabilities = uart_config[type].flags;
-	up->tx_loadsz = uart_config[type].tx_loadsz;
+	if (!up->port.fifosize)
+		up->port.fifosize = uart_config[type].fifo_size;
+	if (!up->tx_loadsz)
+		up->tx_loadsz = uart_config[type].tx_loadsz;
+	if (!up->capabilities)
+		up->capabilities = uart_config[type].flags;
 }
 
 static void __init
@@ -3182,6 +3188,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		uart->bugs		= up->bugs;
 		uart->port.mapbase      = up->port.mapbase;
 		uart->port.private_data = up->port.private_data;
+		uart->port.fifosize	= up->port.fifosize;
+		uart->tx_loadsz		= up->tx_loadsz;
+		uart->capabilities	= up->capabilities;
+
 		if (up->port.dev)
 			uart->port.dev = up->port.dev;