提交 961050d7 编写于 作者: D Dave Airlie

Merge branch 'fixes-for-v4.9-rc2' of http://git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes

This are some fixes which I hoped to still get into v4.9. I used to
test them here since about 2 weeks and Meng came around to test it
on the second platform making use of this IP too, so they are well
tested now.

* 'fixes-for-v4.9-rc2' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: enable pixel clock when enabling CRTC
  drm/fsl-dcu: do not transfer registers in mode_set_nofb
  drm/fsl-dcu: do not transfer registers on plane init
  drm/fsl-dcu: enable TCON bypass mode by default
......@@ -51,6 +51,7 @@ static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
DCU_MODE_DCU_MODE(DCU_MODE_OFF));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
clk_disable_unprepare(fsl_dev->pix_clk);
}
static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
......@@ -58,6 +59,7 @@ static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
clk_prepare_enable(fsl_dev->pix_clk);
regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
DCU_MODE_DCU_MODE_MASK,
DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
......@@ -116,8 +118,6 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
return;
}
......
......@@ -267,12 +267,8 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
return ret;
}
ret = clk_prepare_enable(fsl_dev->pix_clk);
if (ret < 0) {
dev_err(dev, "failed to enable pix clk\n");
goto disable_dcu_clk;
}
if (fsl_dev->tcon)
fsl_tcon_bypass_enable(fsl_dev->tcon);
fsl_dcu_drm_init_planes(fsl_dev->drm);
drm_atomic_helper_resume(fsl_dev->drm, fsl_dev->state);
......@@ -284,10 +280,6 @@ static int fsl_dcu_drm_pm_resume(struct device *dev)
enable_irq(fsl_dev->irq);
return 0;
disable_dcu_clk:
clk_disable_unprepare(fsl_dev->clk);
return ret;
}
#endif
......@@ -401,18 +393,12 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
goto disable_clk;
}
ret = clk_prepare_enable(fsl_dev->pix_clk);
if (ret < 0) {
dev_err(dev, "failed to enable pix clk\n");
goto unregister_pix_clk;
}
fsl_dev->tcon = fsl_tcon_init(dev);
drm = drm_dev_alloc(driver, dev);
if (IS_ERR(drm)) {
ret = PTR_ERR(drm);
goto disable_pix_clk;
goto unregister_pix_clk;
}
fsl_dev->dev = dev;
......@@ -433,8 +419,6 @@ static int fsl_dcu_drm_probe(struct platform_device *pdev)
unref:
drm_dev_unref(drm);
disable_pix_clk:
clk_disable_unprepare(fsl_dev->pix_clk);
unregister_pix_clk:
clk_unregister(fsl_dev->pix_clk);
disable_clk:
......@@ -447,7 +431,6 @@ static int fsl_dcu_drm_remove(struct platform_device *pdev)
struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
clk_disable_unprepare(fsl_dev->clk);
clk_disable_unprepare(fsl_dev->pix_clk);
clk_unregister(fsl_dev->pix_clk);
drm_put_dev(fsl_dev->drm);
......
......@@ -211,11 +211,6 @@ void fsl_dcu_drm_init_planes(struct drm_device *dev)
for (j = 1; j <= fsl_dev->soc->layer_regs; j++)
regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN(i, j), 0);
}
regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
DCU_MODE_DCU_MODE_MASK,
DCU_MODE_DCU_MODE(DCU_MODE_OFF));
regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
DCU_UPDATE_MODE_READREG);
}
struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device *dev)
......
......@@ -20,38 +20,6 @@
#include "fsl_dcu_drm_drv.h"
#include "fsl_tcon.h"
static int
fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
if (fsl_dev->tcon)
fsl_tcon_bypass_disable(fsl_dev->tcon);
}
static void fsl_dcu_drm_encoder_enable(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
if (fsl_dev->tcon)
fsl_tcon_bypass_enable(fsl_dev->tcon);
}
static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
.atomic_check = fsl_dcu_drm_encoder_atomic_check,
.disable = fsl_dcu_drm_encoder_disable,
.enable = fsl_dcu_drm_encoder_enable,
};
static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
......@@ -68,13 +36,16 @@ int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev,
int ret;
encoder->possible_crtcs = 1;
/* Use bypass mode for parallel RGB/LVDS encoder */
if (fsl_dev->tcon)
fsl_tcon_bypass_enable(fsl_dev->tcon);
ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs,
DRM_MODE_ENCODER_LVDS, NULL);
if (ret < 0)
return ret;
drm_encoder_helper_add(encoder, &encoder_helper_funcs);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册