提交 95d161cb 编写于 作者: A Ayaz Abdulla 提交者: Jeff Garzik

[PATCH] forcedeth: watermark fixup

This patch defines the watermark registers and fixes up the use of this
register.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 9744e218
......@@ -271,8 +271,10 @@ enum {
#define NVREG_LINKSPEED_MASK (0xFFF)
NvRegUnknownSetupReg5 = 0x130,
#define NVREG_UNKSETUP5_BIT31 (1<<31)
NvRegUnknownSetupReg3 = 0x13c,
#define NVREG_UNKSETUP3_VAL1 0x200010
NvRegTxWatermark = 0x13c,
#define NVREG_TX_WM_DESC1_DEFAULT 0x0200010
#define NVREG_TX_WM_DESC2_3_DEFAULT 0x1e08000
#define NVREG_TX_WM_DESC2_3_1000 0xfe08000
NvRegTxRxControl = 0x144,
#define NVREG_TXRXCTL_KICK 0x0001
#define NVREG_TXRXCTL_BIT1 0x0002
......@@ -660,7 +662,7 @@ static const struct register_test nv_registers_test[] = {
{ NvRegMisc1, 0x03c },
{ NvRegOffloadConfig, 0x03ff },
{ NvRegMulticastAddrA, 0xffffffff },
{ NvRegUnknownSetupReg3, 0x0ff },
{ NvRegTxWatermark, 0x0ff },
{ NvRegWakeUpFlags, 0x07777 },
{ 0,0 }
};
......@@ -2257,6 +2259,16 @@ static int nv_update_linkspeed(struct net_device *dev)
}
writel(txreg, base + NvRegTxDeferral);
if (np->desc_ver == DESC_VER_1) {
txreg = NVREG_TX_WM_DESC1_DEFAULT;
} else {
if ((np->linkspeed & NVREG_LINKSPEED_MASK) == NVREG_LINKSPEED_1000)
txreg = NVREG_TX_WM_DESC2_3_1000;
else
txreg = NVREG_TX_WM_DESC2_3_DEFAULT;
}
writel(txreg, base + NvRegTxWatermark);
writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
base + NvRegMisc1);
pci_push(base);
......@@ -3922,7 +3934,10 @@ static int nv_open(struct net_device *dev)
/* 5) continue setup */
writel(np->linkspeed, base + NvRegLinkSpeed);
writel(NVREG_UNKSETUP3_VAL1, base + NvRegUnknownSetupReg3);
if (np->desc_ver == DESC_VER_1)
writel(NVREG_TX_WM_DESC1_DEFAULT, base + NvRegTxWatermark);
else
writel(NVREG_TX_WM_DESC2_3_DEFAULT, base + NvRegTxWatermark);
writel(np->txrxctl_bits, base + NvRegTxRxControl);
writel(np->vlanctl_bits, base + NvRegVlanControl);
pci_push(base);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册