USB: more serial drivers writing after disconnect

this covers the rest of the obvious cases by using the flags
and locks to guard against disconnect which were introduced
in the earlier patch against mos7720.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/airprime.c

@@ -217,7 +217,10 @@ static void airprime_close(struct usb_serial_port *port, struct file * filp)
 	priv->rts_state = 0;
 	priv->dtr_state = 0;
 
-	airprime_send_setup(port);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		airprime_send_setup(port);
+	mutex_lock(&port->serial->disc_mutex);
 
 	for (i = 0; i < NUM_READ_URBS; ++i) {
 		usb_kill_urb (priv->read_urbp[i]);

drivers/usb/serial/cp2101.c

@@ -348,7 +348,10 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 /*

drivers/usb/serial/ftdi_sio.c

@@ -1198,7 +1198,8 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s", __FUNCTION__);
 
-	if (c_cflag & HUPCL){
+	mutex_lock(&port->serial->disc_mutex);
+	if (c_cflag & HUPCL && !port->serial->disconnected){
 		/* Disable flow control */
 		if (usb_control_msg(port->serial->dev,
 				    usb_sndctrlpipe(port->serial->dev, 0),
@@ -1212,6 +1213,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
 		/* drop RTS and DTR */
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} /* Note change no line if hupcl is off */
+	mutex_unlock(&port->serial->disc_mutex);
 
 	/* cancel any scheduled reading */
 	cancel_delayed_work(&priv->rx_work);

drivers/usb/serial/garmin_gps.c

@@ -1020,19 +1020,26 @@ static void garmin_close (struct usb_serial_port *port, struct file * filp)
 	if (!serial)
 		return;
 
-	garmin_clear(garmin_data_p);
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
 	usb_kill_urb (port->read_urb);
 	usb_kill_urb (port->write_urb);
 
-	if (noResponseFromAppLayer(garmin_data_p) ||
-	    ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
-		process_resetdev_request(port);
-		garmin_data_p->state = STATE_RESET;
+	if (!port->serial->disconnected) {
+		if (noResponseFromAppLayer(garmin_data_p) ||
+		    ((garmin_data_p->flags & CLEAR_HALT_REQUIRED) != 0)) {
+			process_resetdev_request(port);
+			garmin_data_p->state = STATE_RESET;
+		} else {
+			garmin_data_p->state = STATE_DISCONNECTED;
+		}
 	} else {
 		garmin_data_p->state = STATE_DISCONNECTED;
 	}
+	mutex_unlock(&port->serial->disc_mutex);
 }
 
 

drivers/usb/serial/visor.c

@@ -362,7 +362,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp)
 			kfree (transfer_buffer);
 		}
 	}
-	mutex_lock(&port->serial->disc_mutex);
+	mutex_unlock(&port->serial->disc_mutex);
 
 	if (stats)
 		dev_info(&port->dev, "Bytes In = %d  Bytes Out = %d\n",